Shaft seal ring for the 13 mm pinion shaft of mopeds / mopeds with Sachs 50 engines
This shaft seal ring (colloquially known as oil seal) fits the old version, with 13.0 mm shaft seal ring or felt ring on the main shaft, these pinion shafts also have 8 x 4 mm roller bearings installed.
Ø inner: 13 mm
Ø outer: 25 mm
Width: 5 mm
Material: NBR
Temperature resistant: approx. -30 to +100 °C, briefly up to 120 °C
Type: AS - with rubberized outer jacket, one sealing lip and one dust lip
| Temperature resistance (min.) | -30 - 100 °C |
| Shaft seal type | AS - With rubberized outer casing / one sealing lip / one dust lip. |
| Manufacturer | Sachs |
| Material | NBR |
| Place of use | Pinion shaft |
| Surface | rubberized |
| Ø outside | 25 mm |
| Ø inside | 13 mm |
| Width | 5 mm |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) |
Ratings
Accessories & related products
WEKEM 2K liquid metal
Temperature resistance (min.): -20 - 80 °C · Color: gray · Manufacturer: WEKEM · Material to be used: Aluminum · Material to be used: Ceramics · Material to be used: Metal · Material to be used: Steel · Material to be used: Wood · Contents: 24 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Chemistry · Type of application: 2K · Alignment time: 240 sec
CHF 19.90
CHF 398.00/kg
GPO gasket set 40 - 41 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Ø cylinder: 40 mm · Ø cylinder: 41 mm · Ø outlet inside: 22 mm · Hole spacing inlet: 38 mm · Hole pattern [mm]: 44 x 44 mm · Hole spacing outlet: 42 mm · Area of application: Tuning · Number of components: 4 pcs · Decompressor: Yes
CHF 8.90
Moped fans also bought
NSK E15 shoulder ball bearing 15/35/8 (A1149)
Material: Brass · Material: Steel · Bearing cage: Brass cage ball-guided · Inner ring width: 8 mm · Manufacturer: NSK · Bearing clearance: CN (standard) · Groove ring: No · Surface: blank · Stock number: E15 · Bearing type: Shoulder bearing · Width: 8 mm · Ø outside: 35 mm · Ø inside: 15 mm · Area of application: Standard · Ball bearing closed: No · Pony OEM number: A1149 · Sachs OEM no.: 0232 017 006
CHF 24.90
Oil seal NBR 24.8/31.4/4 A Brake shaft | Sachs 50
Temperature resistance (min.): -30 - 100 °C · Material: NBR · Shaft seal type: A - With rubberized outer part / one sealing lip. · Manufacturer: Sachs · Place of use: Clutch cover · Surface: rubberized · Width: 4 mm · Ø outside: 31.4 mm · Ø inside: 24.8 mm
CHF 5.80
swiing® revival manual shift spring | Sachs 50/2, 503 2AL, 2BL (A1337)
Spring design: Tension spring · Material: Spring steel · Color: gray · Total length: 28 mm · Ø wire: 1.25 mm · Manufacturer: swiing® revival parts · Length spring hook: 8 mm · Surface: burnished · Ø outside: 8.5 mm · Ø inside: 6 mm · Pony OEM number: A1337 · Sachs OEM no.: 0239 102 100
CHF 10.90
swiing® revival engine seal | Sachs 502, 50/2, 50/3, 50/4 (A1828)
Manufacturer: swiing® revival parts · Ø inside: 86 mm · Number of components: 1 pcs · Material: Sealing paper · Color: sand-colored · Total length: 250 mm · Thickness: 0.4 mm · Width: 170 mm · Number of fixing points: 16 pcs · Pony OEM number: A1828 · Sachs OEM no.: 0250 088 100
CHF 5.90
Shaft seal NBR 16/24/4 A Pedal start mechanism | Sachs 50/2, 50/3, 50/4
Temperature resistance (min.): -30 - 100 °C · Shaft seal type: A - With rubberized outer part / one sealing lip. · Ø inside: 16 mm · Ø outside: 24 mm · Width: 4 mm · Manufacturer: Sachs · Material: NBR · Surface: rubberized
CHF 5.90
Collection only possible with online purchase and appointment.
