
10kΩ spark plug connector for your moped, moped and small motorcycle.
The resistor in the spark plug cap prevents magnetic interference with the ignition and is particularly recommended when using an electronic ignition system (HPI, PVL, Selettra, VEC, etc.).
Since the ignition plug has a 6 mm SAE clamping receptacle, the end cap remains mounted on the ignition plug.
You can find spark plugs, spark plug leads and alternative plugs for spark plugs that match the spark plug holder (not supplied) in the accessories section.
Quality product from the Japanese manufacturer NGK.
| Manufacturer | NGK |
| Material | Plastic, Rubber |
| Color | black |
| Spark plug socket | SAE |
| Cable available | No |
| Suppressed | Yes |
| Resistance | 10000 Ω |
| Ø cable | 5 mm, 7 mm |
| Subcategory | Spark plug connector |
Accessories & related products
BERU spark plug connector 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Subcategory: Spark plug connector · Ø cable: 5 mm · Ø cable: 7 mm · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
CHF 8.80
Moped fans also bought
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Manufacturer: Made in Germany · Material: Steel · Ø nipple: 3 mm · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Nipple length: 5 mm · Area of application: Standard
CHF 2.40
VEC electronic ignition coil (replaces ignition coil, capacitor & contact breaker)
Manufacturer: VEC · Place of use: Internal (in the ignition) · Color: black · Ø Internal flywheel: 90 mm · Ø cable holder: 5 mm · Height: 48 mm · Total length: 77 mm · Number of fixing points: 2 pcs · Ø mounting hole: 4.6 mm · Cable length: 140 mm · Cable length: 420 mm · Hole spacing: 54 mm · Mounting type: Screws · Area of application: Original · Area of application: Performance · Area of application: Standard
CHF 149.90
Nut M10x1 SW14 Flywheel
Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Nut type: Flange nut · Height: 8.9 mm · Nominal diameter (thread): 10 mm · Ø outside: 18.8 mm · Drive: External hexagon · Thread type: MF10x1 (fine pitch thread) · Width across flats: 14 mm · Area of application: Standard · Pony OEM number: A4513 · Sachs OEM no.: 0942 072 102
CHF 2.40



