"Tuning Set" additional weight set compatible with your MVT or AKOA Racing internal rotor ignition system on a moped, scooter, or small motorcycle.
The various weight plates allow you to precisely tune the flywheel mass of your electronic internal rotor ignition system to your engine’s setup. The additional weight promotes smoother, more consistent engine operation when stationary and can make starting easier. Depending on the ignition settings and the selected combination of flywheels, the additional flywheel mass can positively influence torque characteristics. The tuning remains individual, as every engine and every vehicle is built and tuned differently. Up to three weight plates can be mounted on the mount, depending on the weight and thickness of the selected plate.
Package Contents:
• 1
mounting sprocket• 2 flywheels (20 g each
)• 1 flywheel (30 g)
• 1 x 130
g flywheel• 1 x 170 g flywheel•
2 x M6 x 12 mm countersunk head screws for mounting the mounting pinion•
2 M5 x 8 mm pan-head screws for securing the weights•
2 M5 x 12 mm pan-head screws for securing the weights
Notes:
Not compatible with the MVT Integral ignition system.
Compatible with vehicles equipped with an AKOA Racing or MVT internal rotor ignition system without a fan disc.
The recoil starter can no longer be used after installation.
Brand-name product from the manufacturer AKOA.
| Manufacturer | AKOA |
| Area of application | Racing, Tuning |
| Ø bolt circle | 24.5 mm |
| Ø outside | 90 mm, 64.8 mm |
| Ø mounting hole | 6.7 mm |
| Weight | 475 g |
| Universal | |
| Puch | E50 ZA50 (air-cooled) ZA50 (fan-cooled) Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
Accessories & related products
MVT internal rotor ignition incl. rev limiter & light 12V | Puch / Sachs
Manufacturer: MVT Allumage · Manufacturer: swiing® ingenious parts · Tension: 12 V · Performance: 65 W · Direction of rotation: left · Ø mounting plate: 96 mm · Ø Flywheel outside: 49.2 mm · Ø cable: 7 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Weight: 268 g · Area of application: Tuning
CHF 364.90
Moped fans also bought
Hot 
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Width: 125 mm · Height: 55 mm · Total length: 135 mm · Ø cylinder: 38 mm · Hole pattern [mm]: 44 x 44 · Candle thread: short · Number of fixing points: 4 pcs · Area of application: Standard · Decompressor: No
CHF 32.90
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Surface: galvanized (blue) · Material: Steel · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Number of components: 1 pcs · Nipple length: 5 mm · Area of application: Standard
CHF 2.40
Magura Gas/Deco Cable Clamp, Ø 5 x 6 mm
Drive: Slot · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Ø outside: 5 mm · Ø Cable bushing: 1.6 mm · Total length: 6 mm · Screw head: Lens head · Number of components: 2 pcs · Thread length: 4 mm
CHF 2.00
MMB Speedometer 60 km/h, Ø 48 mm (black dial) NOS
Manufacturer: MMB Instrumente · Material: Metal · Material: Plastic · 4-edge speedometer cable: 1.8 mm · Thread type: MF10x1 (fine pitch thread) · Maximum speed: 60 Km/h · Lighting: Light slit · Surface: chrome-plated · Color: Chrome · Signal type Tacho: analog · Color: black · Color: red · Color: white · Ø Receptacle: 48 mm · Total height: 70 mm · Depth: 50 mm · Ø outside: 50.4 mm
CHF 59.90
IMCA shock absorber 30 cm oldschool chrome / silver
Manufacturer: IMCA · Material: Aluminum · Material: Steel · Surface: chrome-plated · Color: Chrome · Damping type: Spring · Total length: 330 mm · Ø spars: 28 mm · Adjustable: Yes · Ø outside: 40 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Ø Fastening inside: 10 mm · Hole spacing: 300 mm
CHF 76.90
Working late? Evening hours on Thursday until 20:00
