Special racing exhaust for various Puch mopeds, mopeds and small motorcycles equipped with a cylinder with exhaust port.
This racing exhaust impresses with its solid construction and high-quality workmanship.
Due to the huge resonance body, this racing muffler gives your moped a brute increase in power in the mid and upper rev range.
Note: Originally, the racing muffler was designed for Puch Magnum small engine bikes. For mounting on a Puch Maxi, however, adjustments to the rear bracket are required, as the swingarm mounting is in a different position.
Mounting aids and other mounting parts can be found in the accessories section.
Handmade quality product from the manufacturer MLM.
| Manufacturer | MLM |
| Material | Steel |
| Color | black |
| Flame tube attachment | Cable ties |
| Exhaust type | Cone / double cone |
| Number of fixing points | 1 pcs |
| Mounting type | Welded lug |
| Puch | E50 |
Ratings
Accessories & related products
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Area of application: Tuning · Place of use: Exhaust · Reinforced: No · Ø outlet inside: 28 mm · Thickness: 3 mm · Ø inside: 27.4 mm · Ø screw holder: 6.6 mm · Hole spacing outlet: 42.5 mm
CHF 7.40
Moped fans also bought
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Number of components: 2 pcs · Ø outside: 5 mm · Total length: 6 mm · Thread length: 4 mm
CHF 2.00
Airsal 47 mm cylinder kit angled exhaust | Puch
Nominal diameter: 47 mm · Manufacturer: Airsal · Material: Aluminum · Camouflaged: No · Surface: sandblasted · Crankshaft stroke: 43 mm · Displacement: 75 ccm · Hole spacing inlet: 38 mm · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm · Outlet type: slanted · Thread outlet: M6x1 (standard thread) · Area of application: Tuning
CHF 169.90
Stage6 8-folding diaphragm by Moto Tassinari (Gilardoni italkit)
Manufacturer: Stage6 · Material: Plastic · Surface: raw · Number of flaps: 8 pcs · Membrane material: Carbon · Width: 49 mm · Total length: 77 mm · Thick membrane platelets: 0.4 mm · Mounting type: Screws · Number of fixing points: 4 pcs · Ø mounting hole: 6.6 mm · Hole pattern [mm]: 60 x 35 mm · Area of application: High End
CHF 114.90
Polini 24 mm carburetor (hand choke)
Nominal diameter: 24 mm · Manufacturer: Polini · Component group Carburetor: Carburetor complete · Carburetor type: Flat slide valve · Ø Air filter connection: 49 mm · Area of application: Tuning · Ø fuel hose connection: 6 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Mounting type: Plug connection
CHF 149.90
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Area of application: Tuning · Place of use: Exhaust · Reinforced: No · Ø outlet inside: 28 mm · Thickness: 3 mm · Ø inside: 27.4 mm · Ø screw holder: 6.6 mm · Hole spacing outlet: 42.5 mm
CHF 7.40
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Thickness: 1 mm · Ø inside: 106 mm · Number of components: 1 pcs · Ø outside: 116 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
CHF 3.90
Collection only possible with online purchase and appointment.
