Black, adjustable shock absorbers for your moped, moped and small motorcycle.
The height or preload of the shock absorbers can be adjusted in five stages thanks to the special spring mount.
Length (mount - mount): 240 mm
With the plastic bushes supplied, the diameter at the attachment points can be reduced from 10 mm to 8 mm.
The rear springs should always be secured with large washers so that the plastic bushes of the suspension struts do not move if lateral forces occur.
| Ø outside | 46 mm |
| Manufacturer | MKX |
| Material | Steel, Aluminum |
| Surface | varnished |
| Color | black |
| Damping type | Spring |
| Ø Fastening inside | 8 mm, 10 mm |
| Mounting type | Nuts & bolts |
| Ø spars | 24 mm |
| Adjustable | Yes |
| Number of fixing points | 2 pcs |
| Hole spacing | 320 mm |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Contents [ml]: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
CHF 21.90
CHF 2’190.00/l
YSS shock absorber Racing 32 cm (oil pressure)
Ø outside: 53 mm · Manufacturer: YSS · Material: Steel · Surface: varnished · Color: black · Damping type: Hydraulic (oil) · Ø Fastening inside: 10 mm · Mounting type: Nuts & bolts · Ø spars: 32 mm · Adjustable: Yes · Number of fixing points: 2 pcs · Hole spacing: 355 mm
CHF 139.90
MKX shock absorber 32 cm chrome
Ø outside: 46 mm · Manufacturer: MKX · Material: Steel · Surface: chrome-plated · Color: Chrome · Damping type: Spring · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Mounting type: Nuts & bolts · Ø spars: 24 mm · Adjustable: Yes · Number of fixing points: 2 pcs · Hole spacing: 320 mm
CHF 49.90
Moped fans also bought
Not so nice 
Luggage carrier black | Puch Maxi S
Height: 32 mm · Width: 168 mm · Material: Steel · Surface: varnished · Color: black · Mounting type: Nuts & bolts · Number of fixing points: 4 pcs · Ø mounting hole: 8.2 mm · Ø mounting hole: 8.8 mm · Hole spacing: 29 mm · Wheel size [inch]: 17 " · Total length: 425 mm
CHF 19.90
GPO side bars black matt (1A quality) | Puch Maxi S
Height: 35 mm · Width: 170 mm · Ø outside: 12.5 mm · Manufacturer: GPO · Material: Steel · Surface: varnished · Color: black · Mounting type: Screws · Number of fixing points: 4 pcs · Ø mounting hole: 8.1 mm · Hole spacing: 410 mm · Total length: 420 mm
CHF 29.90
KMC drive chain black 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: KMC · Material: Steel · Surface: varnished · Color: black · Color: gray · Rolling circumference: 1626 mm · Number of chain links: 128 pcs · Chain lock type: Spring lock · Ø Pin: 3.96 mm · Ø bore: 4 mm
CHF 22.90
DMP clutch "Racing" aluminum reinforced | Puch E50
Ø outside: 94 mm · Manufacturer: DMP · Area of application: High End · Area of application: Performance · Area of application: Racing · Material: Steel · Area of application: Tuning · Material addition: Chrome steel (known as Nirosta®) · Thickness: 22 mm · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs
CHF 119.90
Collection only possible with online purchase and appointment.
