Original gasket for the drain plug of the float chamber on the TM24-9 MIKUNI racing carburetor of your moped, moped or small motorcycle.
Good-quality aftermarket carburetors often only use O-rings at this point instead of a proper seal.
| Manufacturer | MIKUNI |
| Material | Fiber |
| Component group Carburetor | Sealing, revising |
| Ø inside | 6 mm |
| Thickness | 0.4 mm |
| Carburetor type | Mikuni (VM, TM, TMX) |
| Ø outside | 8 mm |
Ratings
Accessories & related products
MIKUNI 24 mm flat slide carburetor TM24-9 hand choke
Nominal diameter: 24 mm · Manufacturer: MIKUNI · Component group Carburetor: Carburetor complete · Carburetor type: Flat slide valve · Choke control: Hand choke · Width: 75 mm · Nozzle thread: M5.3x0.9 (standard thread) · Mounting type: Plug connection · Ø fuel hose connection: 6 mm · Nozzle size: 130 · Ø Air filter connection: 44 mm · Height: 130 mm · Size of secondary nozzle: 51 · Area of application: Tuning
CHF 194.90
MIKUNI choke knob carburetor TM24-9
Manufacturer: MIKUNI · Material: Brass · Material: Plastic · Material: Spring steel · Component group Carburetor: Choke control · Ø inside: 8 mm · Carburetor type: Mikuni (VM, TM, TMX) · Ø outside: 13 mm · Choke control: Hand choke · Total length: 49.8 mm
CHF 24.90
MIKUNI needle jet Q-0 (454) Carburetor TM24-9
Manufacturer: MIKUNI · Material: Brass · Component group Carburetor: Spraying · Carburetor type: Mikuni (VM, TM, TMX) · Nozzle type: Needle nozzle · Thread length: 5.5 mm · Total length: 34.5 mm · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 454
CHF 22.90
Moped fans also bought
Karcoma fuel tap M12x1 vertical (with union nut) 2 connections
Manufacturer: Karcoma · Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Mounting type: Union nut · Installation direction: vertical / vertical · Outlet direction: any · Spare tube shape: straight · Ø fuel hose connection: 6 mm · Reserve level: 50 mm
CHF 24.90
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Nipple shape: Cylinder · Ø Stranded wire: 1.25 mm · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Cable length: 2200 mm · Number of components: 1 pcs · Area of application: Standard
CHF 2.40
BING O-ring Bing SRE & 85, Ø 20 mm
Cord thickness: 1.4 mm · Manufacturer: BING · Place of use: Carburetor · Material: Rubber · Surface: raw · Ø inside: 17.2 mm · Color: black · Ø outside: 20 mm · Number of components: 1 pcs · Area of application: Standard · Pony OEM number: A4281 · Sachs OEM no.: 0250 160 101
CHF 2.90
GPO gasket set carburetor Bing SRE
Manufacturer: GPO · Camouflaged: No · Material: Sealing paper · Component group Carburetor: Sealing, revising · Carburetor type: SRE · Thickness: 0.5 mm · Thickness: 0.9 mm · Thickness: 1.5 mm · Ø outside: 12.2 mm · Ø outside: 45 mm · Ø inside: 7.8 mm · Ø inside: 41 mm
CHF 4.90
Clamping screw with slotted chain guard black | Pony GTX, Cilo, KTM
Ø External head: 19 mm · Manufacturer: Pony · Material: Hard plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Thread type: Sheet metal screw · Color: black · Color: silver · Total length: 29.5 mm · Number of components: 1 pcs · Area of application: Standard · Drive: External hexagon · Drive: Slot · Thread length: 18 mm
CHF 2.40
Clip chain guard/ footboard | Pony GTX Cilo 521 (P0422)
Manufacturer: Pony · Material: Spring steel · Surface: galvanized (blue) · Thread type: Sheet metal screw · Color: silver · Total length: 23.9 mm · Height: 6.7 mm · Number of fixing points: 1 pcs · Ø mounting hole: 3 mm · Ø mounting hole: 3.9 mm · Width: 16.1 mm
CHF 1.40
Karcoma fuel tap M12x1 vertical | Sachs / Pony / Cilo
Manufacturer: Karcoma · Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Aluminum · Filter type: Plastic net · Mounting type: Union nut · Installation direction: vertical / vertical · Outlet direction: any · Spare tube shape: straight · Ø fuel hose connection: 6 mm · Reserve level: 50 mm
CHF 24.90
swiing® revival screw fuel inlet Bing SRE, 85, SRC, SRF, SLH, SRA
Manufacturer: swiing® revival parts · Thread type: M8x0.75 (fine pitch thread) · Drive: External hexagon · Screw head: Hexagon · Shank: Yes · Thread length: 13 mm · Alternative version of the Pony OEM number: A4656 · Alternative version of the Sachs OEM number: 2640 009 000
CHF 8.90
Collection only possible with online purchase and appointment.
