38.0 mm piston with two 2 mm rectangular piston rings with flank lock (FS) for use in Meteor cast iron cylinders suitable for your Sachs 502, 50/2, 503 2AL, AAL, 2BL, ABL CH moped / moped.
The detailed dimensions of the piston according to the technical drawing can be found in the details. You can also find out about the piston rings used, their stems and locking types on the legend in the pictures.
This special piston has a molybdenum coating. In combination with oil, this results in technologically advanced wear protection with outstanding sliding properties.
Commonly used for cylinders subject to heavy loads (racing cylinders).
The piston kit contains piston pins, piston clips and piston rings.
You will find the corresponding assembly tool, piston pin locks and, if necessary, the corresponding cylinder in the accessories section.
Original spare part number: A2772
Quality product from the Italian manufacturer Meteor.
| Nominal diameter | 38 mm |
| Manufacturer | Meteor Racing |
| Surface | molybdenum-coated |
| Thick piston ring | 1.6 mm |
| Ø outside piston (A) | 37.95 mm |
| Compression height (C) | 28 mm |
| Curvature (D) | 3 mm |
| Total piston height (E) | 53 mm |
| Number of piston rings (F) | 2 pcs |
| Piston ring mold | Rectangular ring |
| Piston ring impact | Flank safety device (FS) |
| Piston ring height | 2 mm |
| Ø piston pin (B) | 12 mm |
| Piston weight | 79 g |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 503 - AAL, ABL, 2AL / 2BL |
Accessories & related products
GPO piston pin extractor Ø 10, 12, 14 mm
Surface: burnished · Manufacturer: GPO · Material: Steel · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Area of application: (Dis)assembly tool · Number of components: 7 pcs · Total length: 130 mm · Width across flats SW: 10 mm · Width across flats SW: 17 mm
CHF 19.90
Meteor piston rings 38 x 2 mm (FS) (pair) | Sachs 50/2, 503
Nominal diameter: 38 mm · Manufacturer: Meteor · Diameter: 38 mm · Height: 2 mm · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Thick piston ring: 1.6 mm · Pony OEM number: A1091 · Sachs OEM no.: 0215 009 000
CHF 10.90
Moped fans also bought
GPO license plate holder Inox (CH version)
Width: 105 mm · Thread type: M5x0.8 (standard thread) · Height: 5.3 mm · Manufacturer: GPO · Total length: 145 mm · Material: Chrome steel (known as Nirosta®) · Color: silver · Ø mounting hole: 5 mm · Mounting type: Nuts & bolts · Hole spacing: 30 mm · Hole spacing: 50 mm · Thread length: 8 mm · Number of fixing points: 2 pcs
CHF 10.90
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Width across flats (trigger): 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Total length: 55 mm · Total length: 75 mm · Strength class: 8.8 · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Number of components: 1 pcs
CHF 9.90
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C
CHF 9.90
CHF 22.00/l
Meteor piston 38 mm | Sachs 50/2, 503 (A2772)
Manufacturer: Meteor · Nominal diameter: 38 mm · Ø outside piston (A): 37.95 mm · Ø piston pin (B): 12 mm · Compression height (C): 28 mm · Curvature (D): 3 mm · Total piston height (E): 53 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Thick piston ring: 1.6 mm · Piston weight: 79 g · Pony OEM number: A2772 · Pony OEM number: A4358 · Sachs OEM no.: 0286 377 010 · Sachs OEM no.: 0286 378 005
CHF 49.90
swiing® revival gasket set 38 mm cylinder | Sachs 503
Manufacturer: swiing® revival parts · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Area of application: Tuning · Number of components: 3 pcs · Hole spacing inlet: 32 mm · Ø cylinder: 38 mm · Hole pattern [mm]: 60 x 40 mm / 37 x 37 mm · Decompressor: No
CHF 10.90
swiing® revival gasket cylinder head 38 mm cylinder | Sachs 503, 502, 50/2, 50/3, 50/4
Nominal diameter: 38 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Place of use: Cylinder head · Area of application: Standard · Thickness: 0.2 mm · Ø cylinder: 38 mm · Hole pattern [mm]: 37 x 37
CHF 4.90
Collection only possible with online purchase and appointment.
