Parts from GPO
High-quality standard parts for your moped for little pocket money
With our own brand GOOD PARTS ONLY (GPO), we offer you a wide selection of standard and spare parts for your moped. No bling-bling, just honest quality!
GPO 43.5 mm cylinder head with O-ring, Polini Tuning new version | Puch
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Width: 135 mm · Ø cylinder: 43.5 mm · Total length: 140 mm · Area of application: Tuning · Candle thread: short · Number of fixing points: 4 pcs · Height: 55 mm · Hole pattern [mm]: 44 x 44 · Decompressor: No
CHF 53.90
Not in stock
GPO 38 mm cylinder kit 50 ccm 6 channel | Puch
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Displacement: 50 ccm · Nominal diameter: 38 mm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Hole spacing inlet: 38 mm · Thread inlet: M6x1 (standard thread) · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Area of application: Tuning · Outlet type: straight · Number of fixing points: 4 pcs · Thread outlet: M6x1 (standard thread) · Camouflaged: No
CHF 112.90
GPO 17.5 mm PHBG AS carburetor hand choke (Dell'Orto replica)
Manufacturer: GPO · Component group Carburetor: Carburetor complete · Material: Aluminum · Nominal diameter: 17.5 mm · Mounting type: Bride · Mounting type: Plug connection clamped · Color: black · Carburetor type: PHBG AS · Ø Internal connection: 24 mm · Height: 130 mm · Area of application: Tuning · Ø without reducing sleeve: 26 mm · Total length: 71.5 mm · Width: 63 mm · Ø Air filter connection: 32 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Ø fuel hose connection: 5.3 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 55 · Nozzle thread: M5x0.8 (standard thread) · Nozzle block: 262AU · Camouflaged: No · Nozzle size: 80 · Size of secondary nozzle: 50
CHF 79.90
GPO headlight angular chrome / black without switch
Manufacturer: GPO · Test mark: none · Bulb holder: BA15d · Color: Chrome · Housing material: Plastic · Color: black · Surface: chrome-plated · Surface: raw · Color: transparent · Tension: 6 V · Tension: 12 V · Lens material: Plastic · Width: 120 mm · Height: 86 mm · Number of fixing points: 2 pcs · Speedometer recording: 48 mm · Switch included: No · Thread size: M6 · Battery operated: No · Mounting type: screw in (thread) · Area of application: Standard · Depth: 140 mm
CHF 19.90
GPO puller set flywheel 12 version
Manufacturer: GPO · Width across flats Screw: 14 mm · Width across flats Screw: 17 mm · Width across flats Screw: 19 mm · Material: Steel · Surface: burnished · Number of components: 10 pcs · Area of application: (Dis)assembly tool · Thread type: M18x1.5 (standard thread) · Thread type: MF14x1.5 (fine pitch thread) · Thread type: MF16x1.5 (fine pitch thread) · Thread type: MF19x1 (fine pitch thread) · Thread type: MF20x1 (fine pitch thread) · Thread type: MF22x1 (fine pitch thread) · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF24x1 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Thread type: MF27x1 LH (fine/left-hand thread) · Thread type: MF27x1.25 (fine pitch thread) · Thread type: MF28x1 (fine pitch thread)
CHF 84.90
GPO piston 38 mm 6-channel | Puch
Manufacturer: GPO · Nominal diameter: 38 mm · Ø outside piston (A): 37.95 mm · Ø piston pin (B): 12 mm · Compression height (C): 22.4 mm · Curvature (D): 4.9 mm · Total piston height (E): 53.85 mm · Number of piston rings (F): 1 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.45 mm · Piston weight: 66 g
CHF 38.90
GPO racing handlebar fork plate 7 cm aluminum silver
Manufacturer: GPO · Material: Aluminum · Surface: anodized · Color: silver · Width: 650 mm · Fork plate holder length: 70 mm · Height: 70 mm · Mounting type: Fork plate · Ø outside: 22 mm · Clamping diameter: 22.15 mm · Length handlebar ends: 170 mm · Crossbar: Yes · Ø inside (C): 12.5 mm · Total length over ends: 150 mm
CHF 29.90
Page 1 of 58
GPO: Universal parts and type-specific spare parts for your moped
Our GOOD PARTS ONLY brand lives up to its promise: quality and reliability for little money. Probably every moped owner has had bad luck when buying spare parts. Unfortunately, many spare parts on the market fail to deliver the promised quality. It's a shame if you only notice this when you have fitted the new petrol tap, mudguard strut or gasket set. This is more than just annoying, but it doesn't have to be. All parts that we offer you under the GOOD PARTS ONLY label are spare parts in high-quality OEM quality. Selected, checked, tested and approved by us, you can rely on an excellent price-performance ratio with every spare part bearing the GPO brand. Top quality for little money - that's what GPO stands for.
No frills, no bling-bling - just reliable spare parts
‘Good quality, good price’ - the idea behind the GOOD PARTS ONLY brand is to offer every moped rider and every moped enthusiast standard parts of reliable quality, from exhaust clamps to various frame parts and cylinders. To guarantee this, all GPO parts have been tried and tested by us. Another important part of the GPO philosophy is that you will find suitable spare parts in every price range, from the solid standard version for a small amount of money to the high-end part in the upper price segment. GOOD PARTS ONLY also offers plenty of reproduction parts for moped models for which the supply of original parts is difficult or impossible today. With spare parts from the GPO brand, you always make a good choice if you want to buy the right spare part quickly and easily at a fair price. So there's no question that we also offer parts from the GPO brand in our range.
Top-quality spare and universal parts from GPO since 2018
Like many moped enthusiasts, many mofakult team members have suffered greatly in the past from poor quality spare parts, which are available in abundance on the market and can really spoil your day. Because we wanted to spare moped lovers the hassle and frustration of overpriced or inferior parts, we decided to create GPO, a brand that solves these problems. It was important for us to create a sincere brand with GPO that stands for honest and reliable quality. Good Parts Only therefore focuses entirely on the essentials. And for us, that means offering you affordable, no-frills parts whose quality you can rely on. Spare parts that are fun to use, typical wear parts or replica parts to provide your time-honoured pearl with alternatives to out-of-stock original parts!
Order GOOD PARTS ONLY products online at mofakult
Whether you are looking for cylinders, frame parts, universal parts for mopeds or high-quality replica parts for original parts that are no longer available, at mofakult.ch you will find them from our own brand GOP. We offer you parts for many classic moped models in the best quality at a fair price. Whether you want to repair, restore or simply get your moped in top condition, with GOOD PARTS ONLY you can find the right parts according to the motto ‘Good quality, good price’. You can order them conveniently and with short delivery times directly from stock online.
Related & alternative part manufacturers
Collection only possible with online purchase and appointment.
