Complete CDI ignition for anticlockwise rotating engines. Ignition is with light and has an operating voltage of 12V and 6 amps.
Connection of the supplied 6/12V voltage regulator:
- Pin 1: Yellow, current-carrying cable from the light coil
- Pin 2: Yellow cable to light
- Pin 3: Ground
The green cable from the ignition switch (black part on the base plate) goes directly to the ignition coil. Because the ignition is contactless, the ignition can of course only be adjusted with a strobe light and a mark for the desired ignition time must first be attached to the magnetic flywheel and motor housing. The light coil is at the bottom, the switchgear at the top.
The strobe lamp and other useful items can be found under accessories.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Manufacturer: GPO · Material: Steel · Tension: 6 V, 12 V · Direction of rotation: left · Cone ratio: 1:5 · Ø Internal flywheel: 90.9 mm · Ø Flywheel outside: 116.5 mm · Thread type: MF26x1.5 (fine pitch thread) · Weight: 900 g
Manufacturer: CEAB · Material: Plastic · Tension: 12 V · Type of current: Alternating current (AC) · Mounting type: Screws · Ø mounting hole: 6 mm
Manufacturer: GPO · Material: Aluminum, Copper, Plastic, Steel · Tension: 6 V, 12 V · Number of cables: 2 pcs · Cable length: 580 mm · Ø inside: 18.5 mm · Ø Internal flywheel: 90 mm · Ø outside: 90 mm · Number of fixing points: 4 pcs · Ø bolt circle: 80 mm · Area of application: Standard, Performance
Manufacturer: GPO · Color: black · Ø cable holder: 7 mm · Total length: 560 mm · Number of fixing points: 2 pcs · Hole spacing: 80 mm · Area of application: Standard
| Manufacturer | GPO |
| Area of application | Standard, Performance |
| Tension | 12 V |
| Direction of rotation | left |
| Ø mounting plate | 90 mm |
| Mounting type | Screws |
| Ø Internal flywheel | 90 mm |
| Number of fixing points | 2 pcs |
| Puch | ZA50 (air-cooled) ZA50 (fan-cooled) Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL , AML 50/2 - L CH (0.8 PS) , ML CH (0.8 PS) , MB (2.6 PS) , MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS) , LKH (4.5 PS) 50/5 503 - AAL , ABL , 2AL / 2BL , AB , AC , ADV 505 (with pedal shaft) - 1A (AT) , 2A (HG) 535 |
| Zündapp Belmondo |
Ratings
Accessories & related products
Hot 
VEC electronic ignition coil (replaces ignition coil, capacitor & contact breaker)
Total length: 77 mm · Manufacturer: VEC · Color: black · Ø cable holder: 5 mm · Height: 48 mm · Cable length: 140 mm · Cable length: 420 mm · Place of use: Internal (in the ignition) · Ø Internal flywheel: 90 mm · Hole spacing: 54 mm · Area of application: Original · Area of application: Performance · Area of application: Standard · Ø mounting hole: 4.6 mm · Number of fixing points: 2 pcs · Mounting type: Screws
CHF 149.90
GPO ignition set CDI anticlockwise 12 V
Manufacturer: GPO · Material: Aluminum · Tension: 12 V · Performance: 17 W · Direction of rotation: left · Ø mounting plate: 90 mm · Ø Internal flywheel: 90 mm · Mounting type: Screws · Number of fixing points: 4 pcs · Area of application: Original · Area of application: Standard
CHF 209.90
Moped fans also bought
Hot
Wippermann drive chain No.18 (double reinforced)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 4.15 mm · Manufacturer: Wippermann · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 114 pcs · Rolling circumference: 1448 mm · Chain lock type: Spring lock · Ø bore: 4.2 mm
CHF 33.90
GPO ignition plate 6 / 12V CDI ignition
Ø inside: 18.5 mm · Ø outside: 90 mm · Manufacturer: GPO · Material: Aluminum · Material: Copper · Material: Plastic · Material: Steel · Tension: 6 V · Tension: 12 V · Ø bolt circle: 80 mm · Cable length: 580 mm · Number of cables: 2 pcs · Ø Internal flywheel: 90 mm · Area of application: Performance · Area of application: Standard · Number of fixing points: 4 pcs
CHF 89.90
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
