
Oldie luggage carrier with clamp for your older Piaggio Ciao P moped / moped.
The rear luggage carrier is only suitable for the old model with rigid, angular seat post and rear light on the mudguard.
Mounting takes place at the original attachment points under the saddle and on the screws of the seat stays. The tool compartment remains accessible.
Total length: 500 mm
Width: 165 mm
Height: 100 mm
Fixing distance front: 60 mm
Fixing distance rear: 131 mm
Length of luggage carrier clamp: 220 mm
Matching luggage bags as well as an alternative luggage carrier can be found in the accessories section.
A quality product made in Italy.
| Manufacturer | Made in Italy |
| Material | Steel |
| Surface | chrome-plated |
| Color | Chrome |
| Ø mounting hole | 6.5 mm, 9 mm |
| Number of fixing points | 4 pcs |
| Total length | 500 mm |
| Hole spacing | 60 mm, 131 mm |
| Mounting type | Screws, Nuts & bolts |
| Width | 165 mm |
| Height | 100 mm |
| Piaggio | Ciao - P |
Accessories & related products
Luggage carrier Classic Chrome | Piaggio Ciao P
Manufacturer: Made in Italy · Material: Steel · Surface: chrome-plated · Color: Chrome · Height: 100 mm · Width: 140 mm · Total length: 575 mm · Ø mounting hole: 6.5 mm · Number of fixing points: 4 pcs · Mounting type: Nuts & bolts · Mounting type: Screws · Hole spacing: 85 mm · Hole spacing: 135 mm · Piaggio OEM number: 114151
CHF 109.90
Explore categories from Luggage carrier & trailer coupling
Moped fans also bought
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Hole spacing: 30 mm · Hole spacing: 50 mm · Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Thread type: M5x0.8 (standard thread) · Total length: 145 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Width: 105 mm · Thread length: 8 mm · Ø mounting hole: 5 mm · Height: 5.3 mm
CHF 10.90
Main stand black (budget) | Puch Maxi S, P1 / X30 NS, NL, NG
Surface: varnished · Material: Steel · Color: black · Stand base - center mount (A): 207 mm · Total width of stand base (B): 217 mm · Wide receptacle (C): 66 mm · Ø Receptacle (D): 18 mm · Spring nipple distance - center pivot axis (E): 75 mm · Wide upright foot (F): 20 mm · Wide upright foot (F): 50 mm · Total height: 220 mm
CHF 19.90
Dell'Orto 16/16 SHA carburetor hand choke
Manufacturer: Dell'Orto · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Color: black · Carburetor type: SHA · Nominal diameter: 16 mm · Total length: 82 mm · Mounting type: Plug connection clamped · Ø without reducing sleeve: 21 mm · Ø Inside entrance: 16 mm · Width: 72 mm · Ø Output inside: 16 mm · Height: 111 mm · Ø Air filter connection: 56 mm · Ø Air filter connection: 58.5 mm · Ø Internal connection: 19 mm · Ø fuel hose connection: 5.1 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Area of application: Tuning · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 82
CHF 69.90
Oil seal NBR 20/30/5 A Gearbox original | Piaggio Ciao, SI, Bravo, Boxer
Material: NBR · Manufacturer: Piaggio · Surface: rubberized · Temperature resistance (min.): -30 - 100 °C · Shaft seal type: A - With rubberized outer part / one sealing lip. · Width: 5 mm · Ø inside: 20 mm · Ø outside: 30 mm
CHF 5.90
Siem headlight gray | Piaggio Ciao C9, C7
Manufacturer: Siem · Test mark: none · Bulb holder: P26s · Housing material: Plastic · Area of application: Original · Color: gray · Color: white · Thread size: M6 · Number of fixing points: 2 pcs · Speedometer recording: None · Battery operated: No · Mounting type: Screws · Switch included: Yes · Piaggio OEM number: 114427
CHF 65.90
swiing® revival screw set galvanized fan cover | Piaggio Ciao, SI, Bravo, Boxer
Material: Steel · Surface: galvanized (blue) · Manufacturer: swiing® revival parts · Number of components: 8 pcs · Screw head: Panhead · Drive: Cross recess · Thread type: M5x0.8 (standard thread) · Area of application: Standard
CHF 4.90









