Complete connecting rod suitable for crankshafts of various mopeds, mopeds and small motorcycles with Sachs engines.
The replacement connecting rod comes with two connecting rod bolts of different lengths, which are used depending on the crankshaft. The connecting rod requires a 14 mm piston pin.
- Dimension connecting rod pin 1: Ø14 x 30.2 mm
- Dimension connecting rod pin 2: Ø 14 x 34.4 mm
- Connecting rod length (center - center): 85 mm
- Total connecting rod length: 107.4 mm
- Thickness: 10 mm
- Outer diameter of the lower connecting rod eye: 24.75 mm
- Outer diameter of the upper connecting rod eye: 20.85 mm
- Lower needle roller bearing (silver ball): Ø18/14 x 9.75 mm
- Upper needle bearing: Ø15/12 x 12.7 mm
- Ø für piston pin: 12 mm
The two brass spacers are included.
Branded product from the Portuguese manufacturer Jasil under the Top Racing brand.
| Manufacturer | Jasil |
| Material | Steel |
| Surface | copper-coated |
| Connecting rod length center-center | 85 mm |
| Ø Connecting rod bolt | 14 mm |
| Ø lower connecting rod eye outside | 24.75 mm |
| Ø upper connecting rod eye outside | 20.85 mm |
| Thickness | 10 mm |
| Ø piston pin (B) | 12 mm |
| Ø lower bearing inside | 18 mm |
| Ø inside upper bearing | 15 mm |
| Dimension lower bearing | 14/18 x 9.75 mm |
| Total length | 107.4 mm |
| Dimension upper bearing | 12/15 x 12.7 mm |
| Connecting rod pin length | 30.2 mm, 34.4 mm |
| Area of application | Standard, Tuning |
| Sachs | 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 50/5 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV 504 (without pedal shaft) 505 (with pedal shaft) - 1A (AT), 2A (HG) 508 - 1 A 535 |
Moped fans also bought
Oil seal NBR 17/33/7 B DUO crankshaft | Sachs 503 AB, ADV
Temperature resistance (min.): -30 - 100 °C · Simmering type: B DUO - With sheet metal outer casing / two sealing lips. · Width: 7 mm · Place of use: Crankshaft · Manufacturer: Sachs · Material: NBR · Ø inside: 17 mm · Ø outside: 33 mm
CHF 8.90
NSK 6201 ball bearing 12/32/10
Bearing type: Shoulder bearing · Stock number: 6201 · Inner ring width: 10 mm · Manufacturer: NSK · Ball bearing closed: No · Bearing clearance: CM (special/noise-reduced) · Bearing cage: "-" Sheet steel cage ball-guided · Groove ring: No · Material: Steel · Surface: blank · Ø outside: 32 mm · Ø inside: 12 mm · Width: 10 mm · Area of application: Standard
CHF 8.50
Shaft seal NBR 14.96x31.5x3.5 Pinion shaft | Sachs 502, 50/2, 503 (A1134)
Temperature resistance (min.): -30 - 100 °C · Width: 3.5 mm · Place of use: Pinion shaft · Manufacturer: Sachs · Material: NBR · Surface: coated · Ø inside: 14.96 mm · Ø outside: 31.5 mm · Area of application: Standard · Pony OEM number: A1134 · Sachs OEM no.: 0230 011 100 · Sachs OEM no.: 0230 011 200
CHF 7.50
Oil seal NBR 15/30/7 B DUO | Sachs 50/2 / 503 (A1830)
Simmering type: B DUO - With sheet metal outer casing / two sealing lips. · Manufacturer: Sachs · Material: NBR · Ø outside: 30 mm · Ø inside: 15 mm · Width: 7 mm · Temperature resistance (min.): -30 - 100 °C · Pony OEM number: A1830 · Sachs OEM no.: 0250 090 000
CHF 5.40
NTN 6202 C3 ball bearing 15/35/11
Bearing type: Deep groove ball bearing · Stock number: 6202 · Inner ring width: 11 mm · Manufacturer: NTN · Bearing clearance: C3 · Bearing cage: "-" Sheet steel cage ball-guided · Ø outside: 35 mm · Ø inside: 15 mm · Width: 11 mm · Puch OEM number: 900.4.6202
CHF 5.90
Not in stock
swiing® revival gasket set | Sachs 503 ADV wide wall Cat.
Material: Copper · Material: Fiber · Material: Rubber · Material: Sealing carton · Material: Sealing paper · Manufacturer: swiing® revival parts · Number of components: 15 pcs · Area of application: Standard · Ø outlet inside: 23.3 mm · Hole spacing inlet: 38 mm · Hole pattern [mm]: 56 x 56 · Decompressor: No
CHF 44.90
Collection only possible with online purchase and appointment.
