Stainless steel reinforcement plate for E50 input engines of Puch Maxi mopeds/mopeds.
The chrome steel plate can be used for 2- and 3-jaw clutches.
Bending of the clutch cams is no longer possible after mounting this 1.5 mm thick plate.
The M5 countersunk screws included with the clutch reinforcement plate have a strength of 10.9.
Ø inside: 40 mm
Ø outside: 90.5 mm
Thickness: 1.5 mm
Strength: 10.9
Material: stainless steel
Attention: On some clutches, the bolts may have to be shortened down to the circlip (colloquially known as the Seeger ring or Seeger orbital ring) so that the clutch with installed plate does not touch the clutch basket.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Manufacturer | GPO |
| Material | Chrome steel (colloquially known as stainless steel) |
| Area of application | Road use |
| Ø inside | 40 mm |
| Ø outside | 90.5 mm |
| Height | 1.5 mm |
| Puch | E50 |
Ratings
Accessories & related products
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Material: Spring steel · Color: blue · Total length: 28 mm · Ø wire: 1.7 mm · Ø inside: 4.8 mm · Manufacturer: swiing® ingenious parts · Ø outside: 8.3 mm · Number of components: 3 pcs · Surface: coated · Area of application: Tuning
CHF 17.90
Axial needle roller bearing 6.4/17/2 clutch original | Puch E50
Bearing cage: Sheet steel cage · Ø inside: 6.4 mm · Manufacturer: Puch · Ø outside: 17 mm · Bearing type: Needle roller and cage assembly · Width: 2 mm · Area of application: Original · Area of application: Standard · Dimension needle bearing: 6.4/17 x 2 · Puch OEM number: 900.6840
CHF 29.90
swiing® ingenious clutch springs reinforced (+50%) | Puch E50
Spring design: Pressure spring · Ø wire: 2 mm · Ø inside: 4.3 mm · Manufacturer: swiing® ingenious parts · Ø outside: 8.45 mm · Total length: 26.6 mm · Color: red · Material: Spring steel · Area of application: Tuning · Surface: coated · Number of components: 3 pcs
CHF 17.90
swiing® ingenious clutch springs reinforced (+60%) | Puch E50
Spring design: Pressure spring · Ø wire: 2.05 mm · Ø inside: 4.3 mm · Manufacturer: swiing® ingenious parts · Ø outside: 8.45 mm · Total length: 26.9 mm · Color: yellow · Material: Spring steel · Area of application: Tuning · Surface: coated · Number of components: 3 pcs
CHF 17.90
swiing® revival thrust washer set Ø 15 / 17 mm | Puch E50
Manufacturer: swiing® revival parts · Area of application: Standard · Material: Steel · Surface: hardened & ground · Ø inside: 15 mm · Ø inside: 17 mm · Ø outside: 22 mm · Ø outside: 24 mm · Thickness: 1.1 mm · Thickness: 1.3 mm · Thickness: 1.5 mm · Thickness: 1.7 mm
CHF 38.90
Moped fans also bought
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Material: Spring steel · Color: blue · Total length: 28 mm · Ø wire: 1.7 mm · Ø inside: 4.8 mm · Manufacturer: swiing® ingenious parts · Ø outside: 8.3 mm · Number of components: 3 pcs · Surface: coated · Area of application: Tuning
CHF 17.90
Hot 
Leonelli 12V voltage regulator (1A quality)
Material: Aluminum · Material: Plastic · Total length: 50 mm · Height: 15 mm · Ø mounting hole: 6 mm · Manufacturer: Leonelli · Width: 27 mm · Type of current: Alternating current (AC) · Tension: 12 V · Performance: 100 W · Mounting type: Screws
CHF 34.90
swiing® ingenious clutch springs reinforced (+50%) | Puch E50
Spring design: Pressure spring · Ø wire: 2 mm · Ø inside: 4.3 mm · Manufacturer: swiing® ingenious parts · Ø outside: 8.45 mm · Total length: 26.6 mm · Color: red · Material: Spring steel · Area of application: Tuning · Surface: coated · Number of components: 3 pcs
CHF 17.90
swiing® revival gasket gearbox cover engine 0.5 mm | Puch E50
Number of fixing points: 4 pcs · Ø inside: 106 mm · Manufacturer: swiing® revival parts · Ø outside: 116 mm · Color: sand-colored · Thickness: 0.5 mm · Material: Sealing paper · Number of components: 1 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
CHF 2.90
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Number of fixing points: 4 pcs · Ø inside: 106 mm · Manufacturer: swiing® revival parts · Ø outside: 116 mm · Color: sand-colored · Thickness: 1 mm · Material: Sealing paper · Number of components: 1 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
CHF 3.90
Collection only possible with online purchase and appointment.
