Blade-cooled 41 mm (55 cc) racing kit suitable for your moped / moped with Sachs 50, 502, 50/2, 50/3 or 50/4 engine.
The timing of this racing cylinder is deliberately kept low, which ensures high torque in the lower speed range. This effect is further enhanced by the two-piece exhaust. So that you can enjoy every ride in everyday life without worrying, a «30 km» test disguises the actual performance of your power unit.
The racing cylinder set includes cylinder, complete piston kit, cylinder studs and a cylinder base gasket.
Differences to the original BADASS Diablo cylinder:
- On the GPO cylinder, the web of the split exhaust is ground behind to minimize the risk of heat trapping on the exhaust side
- On the GPO tuning cylinder, the edges of the overflow ports have been chamfered in the area of the cylinder neck to make it easier to fit the piston rings.
- The original BADASS cylinder is supplied with a GOL piston, while the GPO Divertimento is equipped with a GPO piston matched to the cylinder. Differences can be seen, among other things, in the crown and in the cut-outs on the piston skirt for opening the overflow ports.
- In the GPO Divertimento, more space has been created for the nuts to tighten the cylinder base.
Manufacturer: GPO · Material: Gray cast iron · Displacement: 55 ccm · Nominal diameter: 41 mm
Manufacturer: GPO · Nominal diameter: 41 mm · Material: Aluminum · Ø outside piston (A): 40.95 mm · Ø piston pin (B): 12 mm · Compression height (C): 28 mm · Curvature (D): 3.4 mm · Total piston height (E): 50.5 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Thick piston ring: 1.7 mm
Manufacturer: GPO · Material: Sealing carton · Number of components: 4 pcs
Manufacturer: GPO · Material: Steel · Surface: blackened · Diameter: 5.3 mm · Thread type: M6x1 (standard thread) · Total length: 62 mm · Thread length: 11.8 mm, 7.8 mm · Width across flats: 10 mm · Strength class: 10.9 · Drive: External hexagon
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M5x0.8 (standard thread) · Total length: 26 mm · Thread length: 14 mm, 7 mm · Width across flats: 8 mm · Strength class: 8, 10.9 · Drive: External hexagon
| Nominal diameter | 41 mm |
| Manufacturer | GPO |
| Material | Gray cast iron |
| Camouflaged | Yes |
| Surface | blank / oiled |
| Displacement | 55 ccm |
| Crankshaft stroke | 42 mm |
| Ø cylinder neck | 46 mm |
| Ø Outlet outside | 40 mm |
| Ø outlet inside | 28 mm |
| Inlet window | 17 x 15 mm |
| Thread inlet | M5x0.8 (standard thread) |
| Hole spacing inlet | 31 mm |
| Ø piston pin (B) | 12 mm |
| Decompressor | No |
| Outlet type | Union nut |
| Thread outlet | MF40x1.5 (fine pitch thread) |
| Number of fixing points | 4 pcs |
| Hole pattern [mm] | 60 x 40 / 51 x 40 / 37 x 37 |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) |
Ratings
Accessories & related products
swiing® revival screw set cylinder head Inox | Sachs 503 / 50/2 / 50/3 / 50/4
Manufacturer: swiing® revival parts · Thread length: 22 mm · Material: Chrome steel (colloquially known as stainless steel) · Area of application: Standard · Number of components: 12 pcs · Thread type: M6x1 (standard thread) · Total length: 34 mm · Drive: External hexagon · Screw head: Hexagon · Shank: Yes · Ø shaft: 5.85 mm · Shank length: 8 mm · Width across flats: 10 mm
CHF 7.40
Cigar exhaust system (Ø 32 / 70 mm) black / chrome | Sachs 50/2
Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Ø outside: 70 mm · Total length: 700 mm · Color: Chrome · Ø Internal connection: 32 mm · Ø Flame tube outside: 32 mm · Exhaust type: Cigar · Mounting type: Screwed clamp · Flame tube attachment: Union nut
CHF 104.90
swiing® revival carburetor 17 mm Bing SSB 1/17/69
Total length: 132 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Carburetor type: SSB · Choke control: without choke · Nominal diameter: 17 mm · Ø fuel hose connection: 6 mm · Nozzle size: 76 · Width: 85 mm · Height: 100 mm · Mounting type: Flange · Mixed oil connection: No · Area of application: Standard · Area of application: Tuning · Hole spacing inlet: 31 mm · Vacuum connection: No
CHF 126.90
CHF 94.90
swiing® ingenious hook wrench M40 exhaust nut | Sachs 50/2
Ø inside: 33 mm · Ø outside: 46 mm · Total length: 280 mm · Manufacturer: swiing® ingenious parts · Number of components: 1 pcs · Material: Rubber · Material: Steel · Surface: galvanized (blue) · Width: 67 mm · Height: 5 mm · Area of application: Workshop accessories · Weight: 300 g
CHF 24.90
41 mm cylinder head tuning | Sachs 50/3, 50/4 LKH
Material: Aluminum · Camouflaged: Yes · Surface: sandblasted · Ø outside: 128 mm · Number of fixing points: 4 pcs · Area of application: Tuning · Ø cylinder: 41 mm · Candle thread: long · Hole pattern [mm]: 37 x 37 · Decompressor: No
CHF 96.90
Not in stock
BAD ASS cylinder head L Ø 41-43 mm | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: BAD ASS · Material: Aluminum · Ø outside: 108 mm · Number of fixing points: 1 pcs · Number of fixing points: 4 pcs · Area of application: Tuning · Ø cylinder: 41 - 43 mm · Ø screw holder: 19.3 mm · Hole pattern [mm]: 37 x 37 · Decompressor: M10x1.5
CHF 149.90
Moped fans also bought
swiing® revival stud bolt set M5x26 inlet (10.9 strength) | Sachs 50/2, 50/2, 50/3
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Total length: 26 mm · Drive: External hexagon · Thread length: 7 mm · Thread length: 14 mm · Thread type: M5x0.8 (standard thread) · Width across flats: 8 mm · Strength class: 8 · Strength class: 10.9
CHF 5.70
GPO 41 mm piston "Divertimento" | Sachs 502, 50/2, 50/3, 50/4
Nominal diameter: 41 mm · Manufacturer: GPO · Material: Aluminum · Thick piston ring: 1.7 mm · Ø outside piston (A): 40.95 mm · Compression height (C): 28 mm · Curvature (D): 3.4 mm · Total piston height (E): 50.5 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Ø piston pin (B): 12 mm
CHF 44.90
Not in stock
GPO stud bolt set "Divertimento" & "Diablo" cylinder | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: GPO · Material: Steel · Surface: blackened · Diameter: 5.3 mm · Drive: External hexagon · Thread type: M6x1 (standard thread) · Strength class: 10.9 · Total length: 62 mm · Width across flats: 10 mm · Thread length: 7.8 mm · Thread length: 11.8 mm
CHF 11.90
Collection only possible with online purchase and appointment.
