Flange gasket for the blower-cooled BADASS Lucifer 41 mm and the GPO Sombrero cylinder kit, suitable for your Puch X30 Velux and with adaptations to your Puch X30 NG-2AH moped / moped.
This intake manifold gasket is an absolute perfect fit and of the highest quality.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Thickness | 0.5 mm |
| Manufacturer | GPO |
| Material | Oiled paper |
| Ø inside | 18 mm |
| Place of use | Admission |
| Hole spacing inlet | 32 mm |
| Ø screw holder | 6 mm |
| Puch | ZA50 (fan-cooled) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
Ratings
Accessories & related products
swiing® revival stud bolt set M6x30 (10.9 strength) galvanized
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 6 mm · Thread type: M6x1 (standard thread) · Drive: External hexagon · Total length: 30 mm · Width across flats: 10 mm · Thread length: 12 mm · Strength class: 8 · Strength class: 10.9
CHF 10.70
BAD ASS Lucifer cylinder kit Ø 41 mm | Puch X30 Velux, NG-2AH
Nominal diameter: 41 mm · Manufacturer: BAD ASS · Camouflaged: No · Material: Gray cast iron · Surface: sandblasted · Ø cylinder neck: 44.9 mm · Ø outlet inside: 25 mm · Ø Inlet inside: 19 mm · Hole spacing inlet: 32 mm · Thread inlet: M6x1 (standard thread) · Ø piston pin (B): 12 mm · Hole pattern [mm]: 44 x 44 · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Decompressor: No · Number of fixing points: 4 pcs · Area of application: Tuning
CHF 209.90
Not in stock
GOL piston 41 mm BAD ASS Lucifer | Puch X30 Velux, NG-2AH
Nominal diameter: 41 mm · Manufacturer: BAD ASS · Ø outside piston (A): 40.94 mm · Compression height (C): 22.4 mm · Curvature (D): 2.4 mm · Total piston height (E): 48.3 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Ø piston pin (B): 12 mm · Weight piston kit: 86 g
CHF 69.90
GOL Piston 45 mm BAD ASS Lucifer BigBore | Puch X30 Velux, NG-2AH
Nominal diameter: 45 mm · Manufacturer: BAD ASS · Ø outside piston (A): 44.94 mm · Compression height (C): 22.4 mm · Curvature (D): 2.4 mm · Total piston height (E): 48.3 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Ø piston pin (B): 12 mm · Weight piston kit: 105 g
CHF 69.90
Moped fans also bought
swiing® revival shim set crankshaft L17 | Puch Z50
Manufacturer: swiing® revival parts · Material: Steel · Surface: blank / oiled · Ø inside: 17.1 mm · Thickness: 0.1 mm · Thickness: 0.15 mm · Thickness: 0.2 mm · Thickness: 0.25 mm · Thickness: 0.3 mm · Ø outside: 23.8 mm · Nominal diameter inside: 17 mm
CHF 8.90
Hot 
swiing® ingenious 17 mm SRF carburetor camouflaged | Sachs 503, Puch Velux
Nominal diameter: 17 mm · Manufacturer: swiing® ingenious parts · Component group Carburetor: Carburetor complete · Material: Aluminum · Mounting type: Plug connection clamped · Carburetor type: SRF · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 5 mm · Total length: 61.5 mm · Nozzle size: 74 · Ø Inside entrance: 17 mm · Ø Output inside: 17.1 mm · Area of application: Tuning · Ø Air filter connection: 23 mm · Width: 47 mm · Ø Internal connection: 23 mm · Height: 89 mm · Height: 112 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle block: 2.2 · Camouflaged: Yes · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
CHF 119.90
swiing® ingenious 17 mm intake manifold | Puch X30 Velux
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Mounting type: Stud bolt · Ø inside: 17 mm · Ø External connection: 23 mm · Area of application: Tuning · Hole spacing inlet: 32 mm · Number of fixing points: 2 pcs · Camouflaged: No
CHF 49.90
Collection only possible with online purchase and appointment.
