
Chrome-plated tuning flue pipe with 28 mm outer diameter.
The exhaust bend fits the following mopeds / mopeds with Beta 521 engine:
Distance between mounting holes: 40 mm
All end fittings with a 28 mm connection diameter can be used in conjunction with this bend.
Note: Depending on the cylinder used, such as one from Airsal, minor adjustments to the flame tube (hole spacing) may be necessary due to production deviations in order to ensure smooth installation. We also recommend the use of nuts with a reduced key width. You can find these in the accessories section.
| Ø inside | 25.6 mm |
| Manufacturer | GPO |
| Material | Steel |
| Surface | chrome-plated |
| Color | Chrome |
| Ø outside | 28 mm |
| Mounting type | Stud bolts & nuts |
| Number of fixing points | 2 pcs |
| Total length | 340 mm |
| Hole spacing outlet | 40 mm |
| Pony / Cilo (Beta 521 & 512) | Beta 512 Beta 521 (engine) |
Accessories & related products
swiing® Revival Exhaust Gasket | Zündapp Belmondo & Pony GTX, Cross 521
Total length: 53 mm · Ø inside: 25 mm · Ø outside: 38.3 mm · Manufacturer: swiing® revival parts · Material: Graphite / Graphite · Place of use: Outlet · Thickness: 1.5 mm · Number of fixing points: 2 pcs · Hole spacing: 40 mm · Ø mounting hole: 7.1 mm
CHF 3.90
swiing® revival special nut M6 SW8 (sprocket ref. back pedal / intake manifold)
Height: 6 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut · Nominal diameter (thread): 6 mm · Width across flats: 8 mm · Drive: External hexagon · Thread type: M6x1 (standard thread)
CHF 2.90
Airsal 43.5 mm cylinder kit Beta | Cilo Cross 521 / 512, Pony Cross 521, Pony GTX 521
Nominal diameter: 43.5 mm · Manufacturer: Airsal · Material: Aluminum · Surface: sandblasted · Displacement: 58 ccm · Crankshaft stroke: 39 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 18 mm · Ø Outlet outside: 21 mm · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Area of application: Tuning · Outlet type: straight · Hole spacing outlet: 38 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 48 x 48 · Camouflaged: No
CHF 199.90
swiing® revival stud bolt cylinder base M6x26 (10.9 strength) | Sachs
Total length: 26 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.8 mm · Strength class: 10.9 · Thread type: M6x1 (standard thread) · Thread length: 9 mm · Thread length: 13 mm
CHF 1.80
Explore categories from Exhaust system
Moped fans also bought
swiing® ingenious 16 mm intake manifold | Beta 521, 512
Ø inside: 16 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Area of application: Tuning · Color: graphite colors · Ø External connection: 19 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Hole spacing inlet: 35 mm
CHF 47.90
Dell'Orto 16/16 SHA carburetor hand choke | Beta 521 & 512
Manufacturer: Dell'Orto · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SHA · Nominal diameter: 16 mm · Color: black · Ø fuel hose connection: 5.1 mm · Ø fuel hose connection: 6 mm · Total length: 82 mm · Height: 83 mm · Ø without reducing sleeve: 21 mm · Ø Inside entrance: 16 mm · Ø Output inside: 16 mm · Ø Air filter connection: 59 mm · Ø Internal connection: 19 mm · Mixed oil connection: No · Vacuum connection: No · Width: 69 mm · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Mounting type: Plug connection clamped · Camouflaged: No · Nozzle size: 82 · Area of application: Tuning
CHF 78.90
swiing® ingenious Exhaust Clamp, 28 mm, Heat-Resistant, Chrome
Manufacturer: swiing® ingenious parts · Material: FPM / FKM (colloquially known as Viton) · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø inside: 25 - 28 mm · Width: 40 mm · Mounting type: Nuts & bolts · Total length: 40 mm
CHF 21.90








