Throttle cable pipe bend incl. cable adjusting screw suitable for various mopeds, mopeds and small motorcycles with Bing or Dell'Orto carburettors.
The throttle cable guide pipe has an M6 x 0.75 mm mounting thread.
Other carburetor elbows and throttle cables can be found under accessories.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Thread type | MF6x0.75 (fine pitch thread) |
| Manufacturer | GPO |
| Width across flats nut | 8 mm |
| Total length | 35 mm, 41.5 mm |
| Material | Brass |
| Component group Carburetor | Adjusting screws, float, etc. |
| Angle | 70 ° |
| Height | 36 mm, 37 mm |
| Internal thread | M5x0.8 (standard thread) |
| Ø outside | 6 mm |
| Puch | E50 ZA50 (air-cooled) |
| Sachs | 503 - ADV 535 |
| Zündapp Belmondo |
Accessories & related products
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Cable length: 2200 mm
CHF 2.40
GPO 85° carburetor pipe bend brass M6x0.75
Thread type: MF6x0.75 (fine pitch thread) · Height: 30 mm · Manufacturer: GPO · Width across flats nut: 8 mm · Total length: 45.5 mm · Total length: 53.5 mm · Component group Carburetor: Adjusting screws, float, etc. · Material: Brass · Angle: 85 ° · Internal thread: M5x0.8 (standard thread) · Ø outside: 6 mm · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
CHF 5.90
Dell'Orto 90° carburetor pipe bend set M6x0.75
Surface: nickel-plated · Manufacturer: Dell'Orto · Width across flats nut: 7 mm · Component group Carburetor: Adjusting screws, float, etc. · Material: Brass · Ø outside: 6 mm · Angle: 90 ° · Height: 27 mm · Total length: 43 mm · Total length: 52 mm · Internal thread: MF5x0.75 (fine pitch thread) · Thread type: MF6x0.75 (fine pitch thread)
CHF 11.90
Dell'Orto 57° / 70° carburetor elbow set M6x0.75
Manufacturer: Dell'Orto · Width across flats nut: 7 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Total length: 31 mm · Total length: 38 mm · Total length: 39 mm · Total length: 46 mm · Internal thread: MF5x0.75 (fine pitch thread) · Height: 33.5 mm · Height: 37 mm · Height: 37.5 mm · Height: 40 mm · Angle: 57 ° · Angle: 70 ° · Thread type: MF6x0.75 (fine pitch thread) · Ø outside: 6 mm
CHF 13.90
43° cable pull pipe bend
Surface: nickel-plated · Manufacturer: Made in Germany · Component group Carburetor: Adjusting screws, float, etc. · Material: Brass · Ø outside: 6 mm · Ø outside: 10 mm · Angle: 43 ° · Height: 26 mm · Total length: 63.5 mm · Total length: 72.5 mm · Thread type: MF6x0.75 (fine pitch thread)
CHF 7.90
swiing® revival 80° carburetor pipe bend M6x0.75
Thread type: MF6x0.75 (fine pitch thread) · Height: 35 mm · Manufacturer: BING · Manufacturer: swiing® revival parts · Width across flats nut: 7 mm · Width across flats nut: 8 mm · Total length: 41.5 mm · Total length: 50 mm · Component group Carburetor: Adjusting screws, float, etc. · Material: Brass · Surface: nickel-plated · Angle: 80 ° · Internal thread: MF5x0.75 (fine pitch thread) · Ø outside: 6 mm
CHF 6.90
90° carburetor pipe bend M6x0.75 Dell'Orto SHA original | Piaggio Ciao
Manufacturer: Piaggio · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Angle: 90 ° · Ø outside: 6 mm · Height: 30 mm · Total length: 27.5 mm · Internal thread: MF5x0.75 (fine pitch thread) · Thread type: MF6x0.75 (fine pitch thread)
CHF 4.90
Nut carburetor pipe bend Dell'Orto SHA carburetor original | Piaggio Ciao, SI, Bravo, Boxer
Surface: galvanized (blue) · Manufacturer: Piaggio · Material: Steel · Nut type: Hexagon nut · Height: 3 mm · Thread type: MF6x0.75 (fine pitch thread) · Drive: External hexagon · Width across flats SW: 8 mm
CHF 2.40
swiing® revival 90° carburetor pipe bend M6x0.75
Thread type: MF6x0.75 (fine pitch thread) · Height: 32 mm · Manufacturer: swiing® revival parts · Width across flats nut: 7 mm · Width across flats nut: 8 mm · Total length: 40 mm · Total length: 49 mm · Component group Carburetor: Adjusting screws, float, etc. · Material: Brass · Surface: nickel-plated · Angle: 90 ° · Internal thread: MF5x0.75 (fine pitch thread) · Ø outside: 6 mm
CHF 6.90
Moped fans also bought
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Cable length: 2200 mm
CHF 2.40
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Thread type: MF12x1 (fine pitch thread) · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Mounting type: Union nut · Spare tube shape: curved · Reserve level: 70 mm
CHF 9.90
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Thread type: M4x0.7 (standard thread) · Manufacturer: Magura · Total length: 6 mm · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Ø Cable bushing: 1.6 mm · Screw head: Lens head · Drive: Slot · Ø outside: 5 mm · Thread length: 4 mm
CHF 2.00
GPO 85° carburetor pipe bend brass M6x0.75
Thread type: MF6x0.75 (fine pitch thread) · Height: 30 mm · Manufacturer: GPO · Width across flats nut: 8 mm · Total length: 45.5 mm · Total length: 53.5 mm · Component group Carburetor: Adjusting screws, float, etc. · Material: Brass · Angle: 85 ° · Internal thread: M5x0.8 (standard thread) · Ø outside: 6 mm · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
CHF 5.90
GPO gasket set carburetor Bing SRE
Manufacturer: GPO · Thickness: 0.5 mm · Thickness: 0.9 mm · Thickness: 1.5 mm · Component group Carburetor: Sealing, revising · Material: Sealing paper · Carburetor type: SRE · Ø inside: 7.8 mm · Ø inside: 41 mm · Ø outside: 12.2 mm · Ø outside: 45 mm · Camouflaged: No
CHF 4.90
swiing® revival 80° carburetor pipe bend M6x0.75
Thread type: MF6x0.75 (fine pitch thread) · Height: 35 mm · Manufacturer: BING · Manufacturer: swiing® revival parts · Width across flats nut: 7 mm · Width across flats nut: 8 mm · Total length: 41.5 mm · Total length: 50 mm · Component group Carburetor: Adjusting screws, float, etc. · Material: Brass · Surface: nickel-plated · Angle: 80 ° · Internal thread: MF5x0.75 (fine pitch thread) · Ø outside: 6 mm
CHF 6.90
Dell'Orto 45° carburetor pipe bend M6x0.75
Surface: nickel-plated · Manufacturer: Dell'Orto · Width across flats nut: 8 mm · Component group Carburetor: Adjusting screws, float, etc. · Material: Brass · Ø outside: 6 mm · Angle: 45 ° · Height: 56 mm · Height: 61 mm · Total length: 34.5 mm · Total length: 42 mm · Internal thread: MF5x0.75 (fine pitch thread) · Thread type: MF6x0.75 (fine pitch thread)
CHF 6.90
Collection only possible with online purchase and appointment.
