High-quality throttle cables (inner cable) in a pack of 25, suitable for all throttle grips and all Bing carburetors on various mopeds, mopeds and small motorcycles.
This cable was also fitted to motorcycles such as Puch, Puch Maxi, Sachs, Hercules, Pony, Solex, Zündapp, etc.
This cable was also fitted to motorcycles such as Puch, Puch Maxi, Sachs, Hercules, Pony, Solex, Zündapp, etc.
The scope of delivery corresponds to 25 pieces
You can find more cable pulls as well as outer sleeves and cutting pliers in the accessories section.
A quality product manufactured in Germany.
| Universal | |
| Puch | E50 ZA50 (air-cooled) ZA50 (fan-cooled) Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL , AML 50/2 - L CH (0.8 PS) , ML CH (0.8 PS) , MB (2.6 PS) , MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS) , LKH (4.5 PS) 50/5 503 - AAL , ABL , 2AL / 2BL , AB , AC , ADV 504 (without pedal shaft) 505 (with pedal shaft) - 1A (AT) , 2A (HG) , 2B (HG) 508 - 1 A 535 |
| Zündapp Belmondo | |
| Tomos | |
| Alpa Chopper / Turbo | |
| DKW | |
| ILO / JLO | |
| Kreidler | Flory MF / MP Foil |
| MBK / Motobécane |
| Miele | |
| Monark | |
| Victoria | |
| Zündapp | 434 Chassis (mountaineer) 247 Motor 278 Motor |
Accessories & related products
Hot 
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Manufacturer: Made in Germany · Material: Steel · Number of components: 1 pcs · Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Surface: galvanized (blue) · Cable length: 2200 mm · Area of application: Standard · Nipple length: 10 mm
CHF 2.40
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Ø Cable bushing: 1.6 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Number of components: 2 pcs · Thread type: M4x0.7 (standard thread) · Total length: 6 mm · Drive: Slot · Surface: nickel-plated · Screw head: Lens head · Ø outside: 5 mm · Thread length: 4 mm
CHF 2.00
Clutch cable / brake cable Ø 1.5 mm x 225 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Manufacturer: Made in Germany · Material: Steel · Number of components: 1 pcs · Ø Stranded wire: 1.5 mm · Nipple shape: Pears · Surface: galvanized (blue) · Cable length: 2250 mm · Area of application: Standard · Nipple length: 10 mm · Piaggio OEM number: 270460
CHF 2.40
Motorex Spray Intact 200 ml
Manufacturer: Motorex · Contents: 200 ml · Area of application: Chemistry · Area of application: Workshop accessories · Hazard warning: Extremely flammable aerosol · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous
CHF 14.70
CHF 73.50/l
Explore categories from Cable pulls & accessories
Moped fans also bought
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Material: Steel · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Surface: galvanized (blue) · Cable length: 2200 mm · Area of application: Standard · Nipple length: 5 mm
CHF 2.40
Hot
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Manufacturer: Made in Germany · Material: Steel · Number of components: 1 pcs · Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Surface: galvanized (blue) · Cable length: 2200 mm · Area of application: Standard · Nipple length: 10 mm
CHF 2.40
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Ø Cable bushing: 1.6 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Number of components: 2 pcs · Thread type: M4x0.7 (standard thread) · Total length: 6 mm · Drive: Slot · Surface: nickel-plated · Screw head: Lens head · Ø outside: 5 mm · Thread length: 4 mm
CHF 2.00
Clutch cable / brake cable Ø 1.5 mm x 225 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Manufacturer: Made in Germany · Material: Steel · Number of components: 1 pcs · Ø Stranded wire: 1.5 mm · Nipple shape: Pears · Surface: galvanized (blue) · Cable length: 2250 mm · Area of application: Standard · Nipple length: 10 mm · Piaggio OEM number: 270460
CHF 2.40
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple) 25 pcs.
Ø Stranded wire: 1.8 mm · Cable length: 2200 mm · Nipple shape: Pears · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Number of components: 25 pcs · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard
CHF 35.90
Clutch cable / brake cable Ø 1.5 mm x 225 cm (pear-shaped nipple) 25 pcs.
Ø Stranded wire: 1.5 mm · Cable length: 2250 mm · Nipple shape: Pears · Ø nipple: 3.5 mm · Nipple length: 10 mm · Number of components: 25 pcs · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Piaggio OEM number: 270460
CHF 35.90
Working late? Evening hours on Thursday until 20:00
