Front, partially round mudguard made of bright steel for your Piaggio Ciao moped with 16" cast or 17" spoke rims.
For mounting the mudguard, all original holes are provided to mount the mudguard to the front of the original fork. In addition, the three holes on the right-hand side are intended for mounting the original cable routing. There are also two holes for attaching the original edge protection or splash guard flap.
| Material | Steel |
| Surface | blank |
| Wheel size | 16 ", 17 " |
| Folding the ends | open folded |
| Shape of the mudguard | partly round |
| Total length over ends | 510 mm |
| Scope | 640 mm |
| Mounting type | Nuts & bolts |
| Wide mudguard profile | 76 mm |
| Height of mudguard profile | 35 mm |
| Total height from support surface to top edge | 162 mm |
| Piaggio | Ciao - P , SC , PX , C24 |
Ratings
Accessories & related products
Autosol stainless steel polish 75 ml
Manufacturer: Autosol · Material to be used: Chrome steel (colloquially known as stainless steel) · Contents: 75 ml · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Chemistry
CHF 10.90
CHF 145.33/l
swiing® revival front fender Inox | Piaggio Ciao
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Color: Chrome · Wheel size: 16 " · Wheel size: 17 " · Folding the ends: open folded · Shape of the mudguard: partly round · Total length over ends: 510 mm · Scope: 640 mm · Wide mudguard profile: 76 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 162 mm · Mounting type: Nuts & bolts · Piaggio OEM number: 274184
CHF 34.90
Explore categories from Mudguard
Moped fans also bought
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Thread type: MF12x1 (fine pitch thread) · Reserve level: 70 mm · Mounting type: Union nut
CHF 9.90
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Drive: Slot · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Ø Cable bushing: 1.6 mm · Screw head: Lens head · Ø outside: 5 mm · Thread length: 4 mm · Thread type: M4x0.7 (standard thread) · Total length: 6 mm
CHF 2.00
swiing® revival rear fender Inox | Piaggio Ciao
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Color: Chrome · Wheel size: 16 " · Wheel size: 17 " · Folding the ends: open folded · Shape of the mudguard: partly round · Total length over ends: 510 mm · Scope: 620 mm · Wide mudguard profile: 76 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 159 mm · Mounting type: Nuts & bolts · Piaggio OEM number: 576135
CHF 34.90
Cable set black | Piaggio Ciao, SI, Bravo, Boxer
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears · Manufacturer: Made in Germany · Material: Steel · Color: black · Quantity: 4 pcs · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm · Total length: 1350 mm · Total length: 1600 mm · Total length: 2180 mm
CHF 19.90
Cuppini handlebar Ø 21 mm with stem 23.5 cm | Piaggio Ciao
Manufacturer: Cuppini · Material: Steel · Surface: chrome-plated · Color: Chrome · Width: 600 mm · Ø Stem: 21 mm · Ø outside: 22 mm · Stem height: 160 mm · Length handlebar ends: 160 mm · Crossbar: No · Mounting type: Front boom mounting · Height: 260 mm
CHF 69.90
Fuel tap horizontal M12x1 (with union nut) bottom outgoing | Piaggio Ciao
Possible lever positions: open / closed / reserve · Material lever: Aluminum · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Thread type: MF12x1 (fine pitch thread) · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Reserve level: 70 mm · Piaggio OEM number: 189525 · Piaggio OEM number: 257073 · Alternative version of the Piaggio OEM number: 103089
CHF 9.90
Collection only possible with online purchase and appointment.
