EL-Liq 74 from the Elring quality brand is a yellow-green, medium-strength, label-free, anaerobic sealing compound that is preferably used for force-fit connections of metallic components, such as housing and bearing covers, as well as flange connections in engine and transmission construction. It replaces all types of flange gaskets
Under exclusion of air and metallic contact with the connecting components, a temperature-resistant sealing film is formed that hardens.
Color: yellow-green
Consistency: hardening
Strength: medium strength
Temperature range: - 55 °C to 180 °C
Maximum sealing gap: 0.35 mm
Resistance to: Mineral oils (also with additives), synthetic oils, lubricants, fuels, organic solvents and coolant additives, cold and hot water
Content: 50 ml
You can find more sealants in the accessories section.
Quality product from the German manufacturer ElringKlinger.
Sicherheitsdatenblatt
Fiche de données de sécurité
Fiche technique
Safety data sheet
Produktdatenblatt
Technical data sheet
| Manufacturer | Elring |
| Contents [ml] | 50 ml |
| Color | yellow-green |
| Gap dimension (max.) | 0.35 mm |
| Temperature resistance (min.) | -55 - 180 °C |
| Area of application | Chemistry |
Accessories & related products
Elring Dirko HT sealing compound gray (silicone) 70 ml permanently elastic up to 315°C
Manufacturer: Elring · Material: Silicone · Contents [ml]: 70 ml · Color: gray · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Temperature resistance (min.): -60 - 315 °C · Gap dimension (max.): 2 mm · Area of application: Chemistry
CHF 19.90
CHF 284.29/l
Loctite 510 sealant 50 ml
Temperature resistance (min.): -55 - 250 °C · Material: Silicone · Color: pink · Manufacturer: Loctite · Contents [ml]: 50 ml · Hazard warning: Causes serious eye irritation · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Area of application: Chemistry · Hazard pictogram: GHS07 - Caution dangerous · Gap dimension (max.): 0.25 mm
CHF 39.90
CHF 798.00/l
Moped fans also bought
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Thread type: M6x1 (standard thread) · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Ø outside: 8 mm · Screw head: Hexagon · Ø Bundle: 6 mm · Total length: 15 mm · Thread length: 7 mm · Width across flats SW: 7 mm · Area of application: Standard
CHF 2.50
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Width across flats (trigger): 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Material: Steel · Surface: blackened · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Number of components: 1 pcs · Total length: 55 mm · Total length: 75 mm · Strength class: 8.8 · Area of application: (Dis)assembly tool
CHF 9.90
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C · Area of application: Gearbox lubrication with clutch
CHF 9.90
CHF 22.00/l
Airsal gasket set 44 - 45 mm
Manufacturer: Airsal · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Number of components: 4 pcs · Ø cylinder: 44 mm · Ø cylinder: 45 mm · Hole spacing inlet: 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Area of application: Tuning
CHF 9.90
Elring Dirko HT sealing compound gray (silicone) 70 ml permanently elastic up to 315°C
Manufacturer: Elring · Material: Silicone · Contents [ml]: 70 ml · Color: gray · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Temperature resistance (min.): -60 - 315 °C · Gap dimension (max.): 2 mm · Area of application: Chemistry
CHF 19.90
CHF 284.29/l
GPO secondary nozzle PHBG (size 30 - 62.5) of your choice
Manufacturer: GPO · Component group Carburetor: Spraying · Material: Brass · Carburetor type: PHBG · Carburetor type: PHBG AD · Carburetor type: PHBG AS · Carburetor type: PHBG BD · Carburetor type: PHBG CS · Carburetor type: PHBG DS · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 30 · Nozzle size: 32 · Nozzle size: 35 · Nozzle size: 37 · Nozzle size: 38 · Nozzle size: 40 · Nozzle size: 42 · Nozzle size: 44 · Nozzle size: 45 · Nozzle size: 46 · Nozzle size: 48 · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 55 · Nozzle size: 60 · Nozzle size: 62.5 · Total length: 9.5 mm · Drive: Slot
CHF 3.50
Collection only possible with online purchase and appointment.
