Capacitor with two cables suitable for Piaggio Bravo and SI mopeds / mopeds with breaker ignition and indicator system.
Models that were equipped with indicators as standard (e.g. DE) do not have the condenser mounted under the pole wheel as usual, on these vehicles the condenser is screwed on from the outside with the corresponding engine housing.
Notes:
The red cable with the &p>wire goes to the breaker, the blue cable with the flat plug goes to the ignition coil.
Figure 3 shows you for which ignition the capacitor is required. Figures 4 and 5 show you where the capacitor is located on the motor housing.
| Manufacturer | EFFE |
| Capacity | 0.28 µF |
| Area of application | Standard |
| Mounting type | Tab for screwing |
| Connection type | Cable for screwing |
| Ø mounting hole | 4.4 mm |
| Ø outside | 18 mm |
| Total height | 27 mm |
| Piaggio OEM number | 187555 |
| Piaggio | Si Bravo / Super Bravo |
Accessories & related products
Hot 
swiing® ingenious puller flywheel | Piaggio Ciao, SI, Bravo, Boxer
Width across flats trigger: 10 mm · Width across flats trigger: 17 mm · Width across flats Screw: 19 mm · Manufacturer: swiing® ingenious parts · Number of components: 3 pcs · Material: Steel · Diameter: 12 mm · Diameter: 24 mm · Surface: blackened · Surface: galvanized (blue) · Thread type: MF12x1.5 (fine pitch thread) · Thread type: MF17x1 (fine pitch thread) · Total length: 100 mm · Area of application: (Dis)assembly tool
CHF 17.90
M3x8 Screw for Capacitor & Ignition Cable (Original) | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Piaggio · Material: Steel · Surface: galvanized (blue) · Thread type: M3x0.5 (standard thread) · Nominal diameter (thread): 3 mm · Drive: Slot · Screw head: Cylinder head · Ø External head: 5.5 mm · Total length: 9.7 mm · Thread length: 8 mm · Strength class: 4.8 · Piaggio OEM number: S.10051 · Piaggio OEM number: S838 · Piaggio OEM number: 002/000838
CHF 0.90
Moped fans also bought
Hot
BOSCH breaker with cable | Bosch / Ducati
Manufacturer: BOSCH · Material: Steel · Ø Internal flywheel: 90 mm · Cable length: 100 mm · Cable available: Yes · Ø axle: 4 mm · Ø mounting hole: 4.5 mm · Area of application: Original · Area of application: Standard · Number of fixing points: 1 pcs · Alternative version of the Pony OEM number: A4606 · Alternative version of the Pony OEM number: A4606A · Pony OEM number: A4607 · Sachs OEM no.: 0283 116 102 · Alternative version of the Sachs OEM number: 0983 106 000 · Alternative version of the Sachs OEM number: 2783 039 001 · BOSCH OEM number: 1 217 013 025 · BERU OEM number: 0 340 100 710
CHF 19.90
Screw M6x16 pan-head cross galvanized
Thread type: M6x1 (standard thread) · Surface: galvanized (blue) · Number of components: 1 pcs · Material: Steel · Nominal diameter (thread): 6 mm · Drive: Cross recess · Thread length: 16 mm · Total length: 20.6 mm · Screw head: Lens head · Ø External head: 12 mm · Shank: No · Strength class: 4.8
CHF 1.70
Screw M4x8 cylinder head slot galvanized
Thread type: M4x0.7 (standard thread) · Surface: galvanized (blue) · Number of components: 1 pcs · Material: Steel · Nominal diameter (thread): 4 mm · Drive: Slot · Thread length: 8 mm · Total length: 11 mm · Screw head: Cylinder head · Ø External head: 6.9 mm
CHF 0.60
OMG fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: OMG · Material: Aluminum · Outer width: 18 mm · Possible lever positions: open / closed / reserve · Material lever: Aluminum · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Mounting type: screw in (thread) · Installation direction: vertical / vertical · Outlet direction: below · Spare tube shape: curved · Reserve level: 60 mm
CHF 12.90
Working late? Evening hours on Thursday until 20:00
