This permanent marker is suitable for marking or repairing small damaged areas and should therefore not be missing in any moped, moped or motorcycle workshop.
This paint marker was designed for smooth surfaces such as glass, metal or plastic.
Color: gold
Strike width: 2 - 4 mm
Tip: round tip
Water-resistant
Abrasion-resistant
Heat-resistant up to 400°C
Note: Before use, the permanent pen should be shaken briefly with the cap on and then the tip should be carefully pumped up and down on a test paper until color fills the tip.
Further variants of waterproof pens can be found in the accessories section.
Quality product from the German manufacturer edding.
| Temperature resistance (min.) | 0 - 400 °C |
| Manufacturer | edding |
| Color | gold |
| Area of application | Paint & varnish |
| Line width | 2 - 4 |
Accessories & related products
Explore categories from Miscellaneous
Moped fans also bought
Hot 
swiing® ingenious exhaust 22 mm camouflaged 2-piece | Puch Maxi S, N
Manufacturer: swiing® ingenious parts · Surface: chrome-plated · Color: Chrome · Material: Steel · Ø Silencer: 54.5 mm · Ø outside: 59 mm · Total length: 910 mm · Ø Flame tube outside: 22 mm · Exhaust type: Flute · Mounting type: Stud bolts & nuts · Mounting type: Welded lug · Number of fixing points: 4 pcs · Flame tube attachment: Flange
CHF 134.90
Inox
Hot
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Color: silver · Material: Chrome steel (colloquially known as stainless steel) · Ø mounting hole: 5 mm · Total length: 145 mm · Thread type: M5x0.8 (standard thread) · Height: 5.3 mm · Width: 105 mm · Mounting type: Nuts & bolts · Thread length: 8 mm · Number of fixing points: 2 pcs · Hole spacing: 30 mm · Hole spacing: 50 mm
CHF 10.90
swiing® revival upright spring blue galvanized | Puch
Spring design: Tension spring · Ø inside: 9 mm · Length spring hook: 19 mm · Length spring hook: 53 mm · Ø wire: 2.5 mm · Manufacturer: swiing® revival parts · Material: Spring steel · Surface: galvanized (blue) · Total length: 122 mm · Ø outside: 14 mm
CHF 2.70
Hot
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Thread type: MF12x1 (fine pitch thread) · Spare tube shape: curved · Mounting type: Union nut · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
CHF 9.90
Dell'Orto 16/16 SHA carburetor hand choke
Nominal diameter: 16 mm · Manufacturer: Dell'Orto · Material: Aluminum · Component group Carburetor: Carburetor complete · Width: 72 mm · Carburetor type: SHA · Height: 111 mm · Total length: 82 mm · Ø without reducing sleeve: 21 mm · Nozzle size: 82 · Ø Inside entrance: 16 mm · Ø Output inside: 16 mm · Ø Air filter connection: 56 mm · Ø Air filter connection: 58.5 mm · Ø Internal connection: 19 mm · Color: black · Ø fuel hose connection: 5.1 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Mounting type: Plug connection clamped · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Camouflaged: No · Area of application: Tuning
CHF 69.90
GPO sprocket 9 - 21 teeth wide | Puch
Chain type: 415H · Manufacturer: GPO · Material: Steel · Surface: Hardened · Number of teeth: 9 pcs · Number of teeth: 10 pcs · Number of teeth: 11 pcs · Number of teeth: 12 pcs · Number of teeth: 13 pcs · Number of teeth: 14 pcs · Number of teeth: 15 pcs · Number of teeth: 16 pcs · Number of teeth: 17 pcs · Number of teeth: 18 pcs · Number of teeth: 19 pcs · Number of teeth: 20 pcs · Number of teeth: 21 pcs · Recording type: Interlocking · Chain pitch: 1/2" x 3/16" · Total thickness: 4.6 mm
CHF 7.90
Working late? Evening hours on Thursday until 20:00
