Fork bush for your moped / moped with EBR forks and 30 mm fork leg diameter.
The bush for the fork leg is made of plastic with good sliding properties. The sliding sleeve should also be greased when installed in the fork.
Ø inner: 30 mm
Ø outer: 34 mm
Length: approx. 20 mm
To fully equip a fork, you need four pieces.
Price per piece.
Branded product from the Italian manufacturer EBR.
| Manufacturer | EWC |
| Material | Plastic |
| Ø inside | 30 mm |
| Ø outside | 34 mm |
| Color | black |
| Total length | 20 mm |
| Puch |
Ratings
Accessories & related products
Motorex High Pressure Grease 3000 4.5 kg
Temperature resistance (min.): -30 - 150 °C · Manufacturer: Motorex · Contents [g]: 4500 g · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Chemistry · Area of application: Fat
CHF 93.90
Not in stock
CHF 20.87/kg
Moped fans also bought
DR 43 mm cylinder kit 12 mm KoBo | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: DR Racing Parts · Material: Gray cast iron · Camouflaged: No · Surface: varnished · Crankshaft stroke: 43 mm · Displacement: 65 ccm · Nominal diameter: 43 mm · Ø cylinder neck: 46 mm · Ø Outlet outside: 22.3 mm · Number of fixing points: 3 pcs · Ø piston pin (B): 12 mm · Ø outlet inside: 18 mm · Area of application: Tuning · Decompressor: Yes · Outlet type: clamped · Hole pattern [mm]: 55 x 34
CHF 142.90
DR 43 mm cylinder kit 10 mm KoBo | Piaggio Ciao, SI, Bravo, Boxer
Nominal diameter: 43 mm · Manufacturer: DR Racing Parts · Material: Gray cast iron · Surface: varnished · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 46 mm · Ø Outlet outside: 22.3 mm · Ø outlet inside: 18 mm · Number of fixing points: 3 pcs · Hole pattern [mm]: 55 x 34 · Ø piston pin (B): 10 mm · Outlet type: clamped · Decompressor: Yes · Camouflaged: No · Area of application: Tuning
CHF 142.90
Headlight black | Piaggio Ciao PX, C24
Manufacturer: Made in Italy · Test mark: none · Housing material: Plastic · Lens material: Plastic · Ø External connection: 6.3 mm · Bulb holder: P26s · Color: black · Number of fixing points: 2 pcs · Tension: 6 V · Tension: 12 V · Speedometer recording: 48 mm · Switch included: Yes · Battery operated: No · Mounting type: Screws · Width: 125 mm · Height: 90 mm · Depth: 147 mm · Area of application: Original · Area of application: Standard · Piaggio OEM number: 584240
CHF 37.90
swiing® revival brake support bolt short Inox | Puch Maxi, Supermaxi
Drive: Outer edge · Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Number of components: 3 pcs · Width across flats SW: 13 mm · Width across flats SW: 17 mm · Ø shaft: 9.8 mm · Ø External head: 14 mm · Thread type: MF10x1 (fine pitch thread) · Shank: Yes · Total length: 32 mm · Shank length: 9.5 mm · Area of application: Standard · Thread length: 13 mm
CHF 12.90
BGS bottom bracket / bottom hole puller with slide hammer
Span: 7 mm · Span: 28 mm · Manufacturer: BGS - Do it yourself · Clamping depth: 10 mm · Clamping depth: 20 mm · Material: Steel · Surface: burnished · Surface: galvanized (blue) · Area of application: (Dis)assembly tool · Thread type: M10x1.5 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Total length: 285 mm · Number of components: 10 pcs
CHF 129.90
Handlebar fork plate 24 cm chrome | Puch Maxi
Manufacturer: Made in Italy · Material: Steel · Color: Chrome · Surface: chrome-plated · Clamping diameter: 22 mm · Ø outside: 22 mm · Width: 625 mm · Height: 240 mm · Fork plate holder length: 75 mm · Mounting type: Fork plate · Length handlebar ends: 150 mm · Crossbar: No
CHF 47.90
Collection only possible with online purchase and appointment.
