38.40 mm oversize piston with an L-shaped piston ring with internal circlip and a rectangular piston ring with flank lock (FS) from DR for all Piaggio mopeds / mopeds.
The detailed dimensions of the piston according to the technical drawing can be found in the details. You can also find out about the relevant piston rings, their stems and locking types on the legend in the images.
The tuning piston is used for bored and honed cylinders.
The piston kit contains piston pins, piston clips and piston rings.
You will find the corresponding assembly tool, piston pin locks and, if necessary, the corresponding cylinder in the accessories section.
Quality product from the Italian manufacturer DR Racing Parts.
| Nominal diameter | 38.4 mm |
| Manufacturer | DR Racing Parts |
| Ø outside piston (A) | 38.33 mm |
| Compression height (C) | 26.4 mm |
| Curvature (D) | 3.8 mm |
| Total piston height (E) | 52.3 mm |
| Number of piston rings (F) | 2 pcs |
| Piston ring mold | L-ring, Rectangular ring |
| Ø piston pin (B) | 10 mm |
| Piston ring impact | Internal fuse (IS), Flank safety device (FS) |
| Piston ring height | 2 mm, 1.5 mm |
| Piston weight | 78 g |
| Piaggio | Ciao - P, SC, PX, C24 Si Bravo / Super Bravo Boxer Grillo |
Accessories & related products
GPO piston pin extractor Ø 10, 12, 14 mm
Manufacturer: GPO · Material: Steel · Surface: burnished · Area of application: (Dis)assembly tool · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Total length: 130 mm · Number of components: 7 pcs · Width across flats SW: 10 mm · Width across flats SW: 17 mm
CHF 19.90
DR 38.4 mm cylinder kit 10 mm KoBo | Piaggio Ciao, SI, Bravo, Boxer
Nominal diameter: 38.4 mm · Manufacturer: DR Racing Parts · Material: Gray cast iron · Camouflaged: No · Area of application: Tuning · Surface: varnished · Crankshaft stroke: 43 mm · Displacement: 50 ccm · Ø cylinder neck: 45.6 mm · Ø outlet inside: 17 mm · Ø Outlet outside: 22.5 mm · Number of fixing points: 3 pcs · Ø piston pin (B): 10 mm · Hole pattern [mm]: 35 x 55 · Outlet type: clamped · Decompressor: Yes
CHF 129.90
Moped fans also bought
GPO pedal cranks chrome (pair) | Puch
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Thread type: FG14.3 (9/16" 20G) · Color: Chrome · Crank length (center-center): 156 mm · Total length: 180 mm · Ø Pedal wedge: 9.5 mm · Cranking (offset): 37 mm · Cranking (offset): 49 mm · Ø Pedal axle: 16 mm · Wide intake: 28 mm
CHF 74.90
IMCA shock absorber 32 cm "Oldschool" chrome / silver
Material: Steel · Surface: chrome-plated · Surface: varnished · Color: silver · Manufacturer: IMCA · Ø outside: 40 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Hole spacing: 320 mm · Damping type: Spring · Adjustable: No · Ø Fastening inside: 10 mm · Ø spars: 28 mm
CHF 76.90
Continental 2.00 - 2.50 x 16" tube
Manufacturer: Continental · Tire width [inch]: 2 - 2.5 " · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Tire width [mm]: 50.8 - 63.5 · Old designation: 20 x 2 · Old designation: 20 x 2.25 · Old designation: 20 x 2.5 · Tire height [%]: 100 · Valve type: TR6 car valve · Wheel size [inch]: 16 "
CHF 14.50
swiing® revival nozzle set M5 (50 - 60) Dell'Orto SHA, PHBG
Material: Brass · Manufacturer: swiing® revival parts · Drive: Slot · Component group Carburetor: Spraying · Quantity: 11 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Total length: 8 mm · Nozzle type: Main nozzle · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 50 · Nozzle size: 51 · Nozzle size: 52 · Nozzle size: 53 · Nozzle size: 54 · Nozzle size: 55 · Nozzle size: 56 · Nozzle size: 57 · Nozzle size: 58 · Nozzle size: 59 · Nozzle size: 60
CHF 22.90
Collection only possible with online purchase and appointment.
