Rubber sleeve for pipe bend and adjusting screw for various Dell'Orto SHA and PHBG carburetors, which are fitted to Piaggio Ciao, Si, Bravo, Boxer, Pony Cross 521, Cilo Cross 521, Pony GTX 521, etc., among others. Mopeds / mopeds are installed.
Length: 30 mm
Ø inner bottom: 7 mm
Ø inner top: 4 mm
The seal protects against false air and unwanted water ingress.
Quality product from the Italian manufacturer Dell'Orto.
| Manufacturer | Dell'Orto |
| Material | Rubber |
| Color | black |
| Ø inside 2 | 4 mm |
| Ø inside | 7 mm |
| Total length | 30 mm |
| Universal | |
| Puch | E50 ZA50 (air-cooled) ZA50 (fan-cooled) Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV 504 (without pedal shaft) 505 (with pedal shaft) - 1A (AT), 2A (HG) 508 - 1 A 535 |
| Pony / Cilo (Beta 521 & 512) | Beta 512 Beta various Beta 521 (engine) |
| Piaggio | Ciao - P, SC, PX, C24 Si Bravo / Super Bravo Boxer Grillo |
| Zündapp Belmondo | |
| Tomos |
Ratings
Accessories & related products
BING rubber grommet Ø 8 mm carburetor pipe bend
Material: Rubber · Color: black · Total length: 29 mm · Manufacturer: BING · Clamping diameter: 4 mm · Ø outside: 12 mm · Ø inside: 8 mm · Alternative version of the Pony OEM number: A1930 · Pony OEM number: A1952 · Alternative version of the Sachs OEM number: 0260 024 001 · Sachs OEM no.: 0260 125 000
CHF 3.90
GPO 85° carburetor pipe bend brass M6x0.75
Manufacturer: GPO · Width across flats nut: 8 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Thread type: MF6x0.75 (fine pitch thread) · Total length: 45.5 mm · Total length: 53.5 mm · Ø outside: 6 mm · Internal thread: M5x0.8 (standard thread) · Height: 30 mm · Angle: 85 ° · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
CHF 5.90
swiing® revival 80° carburetor pipe bend M6x0.75
Total length: 41.5 mm · Total length: 50 mm · Height: 35 mm · Manufacturer: BING · Manufacturer: swiing® revival parts · Width across flats nut: 7 mm · Width across flats nut: 8 mm · Component group Carburetor: Adjusting screws, float, etc. · Material: Brass · Surface: nickel-plated · Ø outside: 6 mm · Internal thread: MF5x0.75 (fine pitch thread) · Thread type: MF6x0.75 (fine pitch thread) · Angle: 80 °
CHF 6.90
Dell'Orto 30° carburetor elbow set M6x0.75
Manufacturer: Dell'Orto · Ø outside: 6 mm · Width across flats nut: 7 mm · Total length: 43 mm · Total length: 50 mm · Height: 13 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Internal thread: MF5x0.75 (fine pitch thread) · Thread type: MF6x0.75 (fine pitch thread) · Angle: 30 °
CHF 11.90
Dell'Orto 90° carburetor elbow set M6x0.75 (long thread)
Manufacturer: Dell'Orto · Ø outside: 6 mm · Width across flats nut: 7 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Total length: 39 mm · Total length: 49 mm · Internal thread: M5x0.8 (standard thread) · Height: 31 mm · Angle: 90 °
CHF 11.90
Dell'Orto 45° carburetor pipe bend M6x0.75
Manufacturer: Dell'Orto · Width across flats nut: 8 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Total length: 34.5 mm · Total length: 42 mm · Ø outside: 6 mm · Internal thread: MF5x0.75 (fine pitch thread) · Height: 56 mm · Height: 61 mm · Angle: 45 °
CHF 6.90
Moped fans also bought
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Area of application: Standard · Thread type: M6x1 (standard thread) · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Total length: 15 mm · Screw head: Hexagon · Ø Bundle: 6 mm · Ø outside: 8 mm · Width across flats: 7 mm · Thread length: 7 mm
CHF 2.50
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Number of components: 1 pcs
CHF 2.40
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Number of components: 2 pcs · Ø Cable bushing: 1.6 mm · Drive: Slot · Total length: 6 mm · Screw head: Lens head · Ø outside: 5 mm · Thread length: 4 mm
CHF 2.00
BING rubber grommet Ø 8 mm carburetor pipe bend
Material: Rubber · Color: black · Total length: 29 mm · Manufacturer: BING · Clamping diameter: 4 mm · Ø outside: 12 mm · Ø inside: 8 mm · Alternative version of the Pony OEM number: A1930 · Pony OEM number: A1952 · Alternative version of the Sachs OEM number: 0260 024 001 · Sachs OEM no.: 0260 125 000
CHF 3.90
Magura adjusting screw brake short
Manufacturer: Magura · Material: Brass · Surface: nickel-plated · Color: silver · Thread type: MF6x0.75 (fine pitch thread) · Drive: Knurled screw · Total length: 31 mm · Total length: 40 mm · Ø External head: 9.15 mm · Thread length: 15 mm · Ø shaft: 6.1 mm · Shank length: 6.9 mm
CHF 3.40
swiing® revival 80° carburetor pipe bend M6x0.75
Total length: 41.5 mm · Total length: 50 mm · Height: 35 mm · Manufacturer: BING · Manufacturer: swiing® revival parts · Width across flats nut: 7 mm · Width across flats nut: 8 mm · Component group Carburetor: Adjusting screws, float, etc. · Material: Brass · Surface: nickel-plated · Ø outside: 6 mm · Internal thread: MF5x0.75 (fine pitch thread) · Thread type: MF6x0.75 (fine pitch thread) · Angle: 80 °
CHF 6.90
Collection only possible with online purchase and appointment.
