Bowden cables for your manual Sachs 50/2 (502) ML, 503 2AL / 2BL, 50/3, 50/4 moped, moped or small motorcycle.
The cables are cut and fitted with end sleeves, adjusting screws and clamps.
The cable lengths are designed for an original handlebar.
Throttle cable length: 100 or 160 cm
Clutch cable length: 94 or 140 cm
Shift cable length: 97 or 160 cm
Front brake cable length: 93 or 160 cm
Decompressor cable length: 93 or 185 cm
We recommend lubricating the inside of the cable before installation.
Helpful assembly tools, grease and other attachments can be found in the accessories section.
A quality product manufactured in Germany.
| Nipple shape | Cylinder, Pears, Barrel (transverse) |
| Total length | 1400 mm, 1600 mm, 1850 mm |
| Manufacturer | Made in Germany |
| Material | Steel |
| Quantity | 5 pcs |
| Color | black |
| Outer shell length | 930 mm, 940 mm, 970 mm, 1000 mm |
| Sachs |
Ratings
Accessories & related products
Motorex Spray Intact 200 ml
Manufacturer: Motorex · Contents: 200 ml · Hazard warning: Extremely flammable aerosol · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Chemistry · Area of application: Workshop accessories
CHF 14.70
CHF 73.50/l
Cable set incl. adjusting screws black | Sachs 50/2, 503 2AL/2BL (manual) high handlebars
Ø Stranded wire: 1.2 mm · Ø Stranded wire: 1.5 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Total length: 1500 mm · Manufacturer: Made in Germany · Material: Brass · Material: Plastic · Material: Steel · Quantity: 5 pcs · Color: black · Outer shell length: 1100 mm · Outer shell length: 1200 mm · Outer shell length: 1300 mm
CHF 49.90
Not in stock
Explore categories from Cable pulls & accessories
Moped fans also bought
Hot 
KMC drive chain 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 3.94 mm · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 128 pcs · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Ø bore: 4 mm
CHF 12.50
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch · Temperature resistance (min.): -30 - 220 °C
CHF 10.90
CHF 24.22/l
BING O-ring Bing SRE & 85, Ø 20 mm
Ø inside: 17.2 mm · Ø outside: 20 mm · Manufacturer: BING · Material: Rubber · Surface: raw · Color: black · Number of components: 1 pcs · Cord thickness: 1.4 mm · Place of use: Carburetor · Area of application: Standard · Pony OEM number: A4281 · Sachs OEM no.: 0250 160 101
CHF 2.90
swiing® revival clutch plates (2 pcs.) | Sachs 50/2, 503 2AL/2BL (A3887)
Ø inside: 29.7 mm · Ø inside: 36 mm · Ø outside: 93.7 mm · Manufacturer: swiing® revival parts · Material: Composite materials · Material: Steel · Thickness: 3.3 mm · Recording type: Interlocking · Number of slats: 2 pcs · Area of application: Standard · Pony OEM number: A3887 · Sachs OEM no.: 0659 010 006
CHF 26.50
swiing® revival ball bearing countershaft | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A2531)
Bearing cage: Sheet steel cage ball-guided · Ø inside: 15 mm · Ø outside: 35 mm · Inner ring width: 25.6 mm · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Material: Steel · Stock number: E15 · Bearing type: Deep groove ball bearing · Width: 8 mm · Area of application: High End · Thread type: MF20.8x1 LH (fine/left-hand thread) · Area of application: Standard · Pony OEM number: A2531 · Sachs OEM no.: 0286 079 105
CHF 49.90
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
