Head piece for the pipe bend of your Bing SRA (Puch X30 Velux) / SSE (ILO / JLO) carburetor on your moped, moped and small motorcycle.
The mounting piece is made of aluminum.
Ø outer: 12 mm
Ø collar: 14 mm
Length: 7 mm
Thread: M6x0.75
Material: aluminum
You can find more attachments and complete carburetors in the accessories section.
Original BING spare part manufactured in Germany in original equipment quality.
NOS – New from old stock.
| Manufacturer | BING |
| Material | Aluminum |
| Component group Carburetor | Adjusting screws, float, etc. |
| Carburetor type | SRA (1/11/31) Velux, SSE |
| Total length | 7 mm |
| Ø outside | 14 mm, 12 mm |
| Thread type | MF6x0.75 (fine pitch thread) |
| Puch | Z50 (X30 Velux) |
| ILO / JLO |
Accessories & related products
BING SSE carburetor 12 mm | Puch MV 50, MS 50
Component group Carburetor: Carburetor complete · Carburetor type: SSE · Nominal diameter: 12 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle size: 50 · Mounting type: Flange · Hole spacing inlet: 32 mm · Area of application: Standard · Area of application: Tuning
CHF 79.90
BING 1/8/51A SRA carburetor NOS | Puch Velux / Zündapp Belmondo
Nominal diameter: 8 mm · Manufacturer: BING · Component group Carburetor: Carburetor complete · Carburetor type: SRA (1/11/35) Velux · Ø Internal connection: 14 mm · Ø Air filter connection: 23 mm · Mounting type: Plug connection clamped · Ø fuel hose connection: 6 mm · Area of application: Original
CHF 319.90
BING 68° carburetor pipe bend M6x0.75 SRA / SSE NOS
Manufacturer: BING · Component group Carburetor: Adjusting screws, float, etc. · Material: Aluminum · Material: Brass · Surface: nickel-plated · Angle: 68 ° · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SSE · Ø outside: 6 mm · Ø outside: 11.95 mm · Ø outside: 14.35 mm · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: M5x0.8 (standard thread) · Total length: 23.5 mm · Height: 28 mm
CHF 22.30
BING SSE carburetor 12 mm cable choke | ILO / Puch MV, MS, DS
Component group Carburetor: Carburetor complete · Carburetor type: SSE · Nominal diameter: 12 mm · Ø Inside entrance: 12 mm · Ø Output inside: 12 mm · Ø fuel hose connection: 6 mm · Choke control: Cable choke · Nozzle size: 50 · Mounting type: Flange · Hole spacing inlet: 32 mm · Area of application: Standard · Area of application: Tuning
CHF 85.90
Moped fans also bought
Rear light glossy chrome - red
Test mark: none · Material: Plastic · Bulb holder: BA9s · Ø Receptacle: 3.5 mm · Color: Chrome · Color: red · Number of fixing points: 1 pcs · Width: 65 mm · Brake light: No · Reflectors: Yes · Battery operated: No · Height: 45 mm · Mounting type: Nuts & bolts · Depth: 55 mm
CHF 9.90
GPO headlight angular chrome / black without switch
Manufacturer: GPO · Test mark: none · Color: Chrome · Color: black · Color: transparent · Tension: 6 V · Tension: 12 V · Housing material: Plastic · Surface: chrome-plated · Surface: raw · Lens material: Plastic · Width: 120 mm · Height: 86 mm · Bulb holder: BA15d · Mounting type: screw in (thread) · Number of fixing points: 2 pcs · Depth: 140 mm · Speedometer recording: 48 mm · Switch included: No · Battery operated: No · Area of application: Standard · Thread size: M6
CHF 19.90
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Surface: galvanized (blue) · Nipple shape: Cylinder · Nipple length: 5 mm · Cable length: 2200 mm
CHF 2.40
swiing® revival seal Float SRE, SRC, SRF, SRA
Manufacturer: swiing® revival parts · Material: Sealing paper · Component group Carburetor: Sealing, revising · Ø inside: 41 mm · Thickness: 1.5 mm · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Ø outside: 45 mm · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
CHF 2.80
Spotlight round Ø 13 cm chrome
Ø outside: 130 mm · Test mark: none · Surface: chrome-plated · Tension: 6 V · Tension: 12 V · Color: Chrome · Housing material: Sheet metal (steel) · Color: transparent · Lens material: Plastic · Width: 135 mm · Height: 146 mm · Bulb holder: BA15d · Speedometer recording: None · Switch included: No · Mounting type: Screws · Area of application: Standard · Battery operated: No · Number of fixing points: 2 pcs · Ø External connection: 12 mm · Depth: 80 mm · Thread size: M6
CHF 25.90
BING 68° carburetor pipe bend M6x0.75 SRA / SSE NOS
Manufacturer: BING · Component group Carburetor: Adjusting screws, float, etc. · Material: Aluminum · Material: Brass · Surface: nickel-plated · Angle: 68 ° · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SSE · Ø outside: 6 mm · Ø outside: 11.95 mm · Ø outside: 14.35 mm · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: M5x0.8 (standard thread) · Total length: 23.5 mm · Height: 28 mm
CHF 22.30
Working late? Evening hours on Thursday until 20:00
