Float chamber suitable for Bing SRE, SRC, SRF and the SRA 1/11/35 carburetor.
This float chamber was installed on Puch Maxi, X30, Velux, Sachs, and Zündapp Belmondo
Outer diameter: 43.5 mm
Overall height: 32.5 mm
Original Puch spare part number: 362.1.15.024.1
Original BING spare part manufactured in Germany in original equipment quality.
| Manufacturer | BING |
| Material | Aluminum |
| Component group Carburetor | Adjusting screws, float, etc. |
| Carburetor type | SRE, SRC, SRF, SRA (1/11/35) Velux |
| Ø outside | 43.5 mm |
| Height | 32.5 mm |
| Width across flats SW | 14 mm |
| Piaggio OEM number | A4587 |
| Sachs OEM no. | 0962 056 000 |
| Puch | E50 ZA50 (air-cooled) ZA50 (fan-cooled) Z50 (X30 Velux) |
| Sachs | 503 - AAL, ABL, 2AL / 2BL, AB, AC |
| Zündapp Belmondo | |
| DKW | |
| Hercules | |
| Kreidler | Flory MF |
| KTM |
Accessories & related products
swiing® revival seal Float SRE, SRC, SRF, SRA
Manufacturer: swiing® revival parts · Thickness: 1.5 mm · Component group Carburetor: Sealing, revising · Material: Sealing paper · Surface: blank · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Ø inside: 41 mm · Ø outside: 45 mm · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
CHF 2.80
Moped fans also bought
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Cable length: 2200 mm
CHF 2.40
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Thread type: MF12x1 (fine pitch thread) · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Mounting type: Union nut · Spare tube shape: curved · Reserve level: 70 mm
CHF 9.90
swiing® revival seal Float SRE, SRC, SRF, SRA
Manufacturer: swiing® revival parts · Thickness: 1.5 mm · Component group Carburetor: Sealing, revising · Material: Sealing paper · Surface: blank · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Ø inside: 41 mm · Ø outside: 45 mm · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
CHF 2.80
GPO gasket set carburetor Bing SRE
Manufacturer: GPO · Thickness: 0.5 mm · Thickness: 0.9 mm · Thickness: 1.5 mm · Component group Carburetor: Sealing, revising · Material: Sealing paper · Carburetor type: SRE · Ø inside: 7.8 mm · Ø inside: 41 mm · Ø outside: 12.2 mm · Ø outside: 45 mm · Camouflaged: No
CHF 4.90
BING Carburetor cover Bing SRE (original)
Manufacturer: BING · Material: Aluminum · Component group Carburetor: Adjusting screws, float, etc. · Thread type: MF6x0.75 (fine pitch thread) · Carburetor type: SRE · Pony OEM number: A4588 · Zündapp OEM number: 265-04.900 · Sachs OEM no.: 0962 058 005
CHF 15.90
swiing® revival 80° carburetor pipe bend M6x0.75
Thread type: MF6x0.75 (fine pitch thread) · Height: 35 mm · Manufacturer: BING · Manufacturer: swiing® revival parts · Width across flats nut: 7 mm · Width across flats nut: 8 mm · Total length: 41.5 mm · Total length: 50 mm · Component group Carburetor: Adjusting screws, float, etc. · Material: Brass · Surface: nickel-plated · Angle: 80 ° · Internal thread: MF5x0.75 (fine pitch thread) · Ø outside: 6 mm
CHF 6.90
Collection only possible with online purchase and appointment.
