3-piece HSS reaming drill bit set in a handy metal box for burr-free reaming of sheet metal, pipes and profiles.
The reaming drill bits have a 3-edge holder, which results in a three-jaw chuck for additional traction.
Ø drill bit small: 3 - 14 mm
Ø drill bit medium: 8 - 20 mm
Ø drill bit large: 16 - 30.5 mm
Spanker notch: straight
Material: HSS
Further tools and aids can be found under accessories.
Branded product from the tool manufacturer BGS.
Details
| Drive shank Drill chuck | triangular |
| Manufacturer | BGS |
| Number of components | 3 pcs |
| Area of application | Workshop accessories |
| Material | HSS |
| Surface | hardened & ground |
| Diameter | 4 mm, 30.5 mm |
Accessories & related products
SONAX multifunctional oil 400 ml
Manufacturer: SONAX · Oil type: fully synthetic · Contents [ml]: 400 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS08 - Harmful to health · Area of application: Chemistry · Area of application: Workshop accessories
CHF 10.90
Not in stock
CHF 27.25/l
Moped fans like you also bought:
Hot 
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Sachs 503, Puch Velux
Total length: 61.5 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SRF · Width: 47 mm · Choke control: Hand choke · Height: 89 mm · Height: 112 mm · Nominal diameter: 17 mm · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 5 mm · Area of application: Tuning · Ø Inside entrance: 17 mm · Ø Output inside: 17.1 mm · Mounting type: Plug connection clamped · Ø Air filter connection: 23 mm · Ø Internal connection: 23 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle block: 2.2 · Camouflaged: Yes · Nozzle size: 74 · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
CHF 119.90
GPO piston 43 mm | Sachs 50/2, 50/3, 50/4
Manufacturer: GPO · Ø outside piston (A): 42.94 mm · Compression height (C): 27.7 mm · Curvature (D): 2.4 mm · Total piston height (E): 50.2 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 43 mm · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Thick piston ring: 1.8 mm · Ø piston pin (B): 12 mm
CHF 44.90
GPO 43 mm "Pomodoro" cylinder kit | Sachs 503
Manufacturer: GPO · Material: Gray cast iron · Area of application: Tuning · Nominal diameter: 43 mm · Displacement: 63 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Ø cylinder neck: 45 mm · Ø outlet inside: 22 mm · Ø Outlet outside: 26 mm · Ø Inlet inside: 19 mm · Hole spacing inlet: 32 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 40 x 60 / 37 x 37 · Outlet type: clamped
CHF 249.90
Collection only possible with online purchase and appointment.
