Mediterranean 43 mm gray cast iron racing cylinder with 63 cc for your Sachs moped / moped with 503 2AL, AAL, 2BL, ABL CH engine.
The GPO Pomodoro cylinder kit (Italian for tomato) is the sun-ripened, refreshing alternative to comparable greenhouse racing cylinders. It impresses with its freshness in the lower rev range, powerful acceleration and pulling power, as well as a fruity finish in the upper rev range. The cylinder absorbs more nutrients than original ones, transforming them into juicy, powerful pulp and exuding a tantalizing aroma of oil. A real treat for your engine that fills the streets with passionate flavors.
Details:
Differences to the original BADASS cylinder:
Due to the correct angle of the intake surface, both original and swiing® brand intake manifolds and carburettors fit under the side valving without the need for adjustments.
The GPO piston improves intake timing, resulting in higher engine speeds. The edges of all ports are smoothed, which enables optimum mixture flow.
Note: Replace the rubber silentblocs on 503 BL engines with aluminum bladders to avoid exhaust flange fatigue fractures at increased power. Ideally, you should use reinforced clutch springs to ensure that all the vitamins and minerals end up on the plate. For an additional flavor note, you can install a 32 mm resonance pot.
Protect the Pomodoro cylinder from heat with the original Sachs cylinder shield or the Pergola cylinder head in the optionally available accessories. You will also find a suitable swiing® irrigation system and piping there.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY, in cooperation with GFO – GOOD FOOD ONLY.
Hole pattern [mm]: 40 x 60 / 37 x 37 · Manufacturer: GPO · Material: Gray cast iron · Displacement: 63 ccm · Nominal diameter: 43 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Ø outlet inside: 22 mm · Ø Inlet inside: 19 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 32 mm · Outlet type: clamped
Manufacturer: GPO · Nominal diameter: 43 mm · Ø outside piston (A): 42.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 27.7 mm · Curvature (D): 2.4 mm · Total piston height (E): 50.2 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Thick piston ring: 1.8 mm
Manufacturer: GPO · Material: Sealing paper, Sealing carton, Aluminum · Number of components: 3 pcs · Thickness: 0.3 mm, 0.4 mm, 1 mm · Ø cylinder: 43 mm · Hole spacing inlet: 0 - 32 mm
Nominal diameter | 43 mm |
Manufacturer | GPO |
Material | Gray cast iron |
Displacement | 63 ccm |
Crankshaft stroke | 43 mm |
Ø cylinder neck | 45 mm |
Ø Outlet outside | 26 mm |
Ø outlet inside | 22 mm |
Ø Inlet inside | 19 mm |
Hole spacing inlet | 32 mm |
Ø piston pin (B) | 12 mm |
Thread inlet | M6x1 (standard thread) |
Outlet type | clamped |
Hole pattern [mm] | 40 x 60 / 37 x 37 |
Area of application | Tuning |
Sachs | 503 - AAL, ABL, 2AL / 2BL |
Accessories & related products
Exhaust set "Tuning" Ø 28 / 70 mm chrome | Sachs 503 2AL/2BL
Manufacturer: Made in Portugal · Material: Steel · Color: Chrome · Surface: chrome-plated · Flame tube attachment: Plug connection clamped · Ø outside: 70 mm · Total length: 700 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cigar · Mounting type: Screwed clamp
CHF 99.90
swiing resonance exhaust set Ø 28 / 70 mm | Sachs 503
Manufacturer: swiing · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø Internal connection: 28 mm · Ø outside: 70 mm · Total length: 730 mm · Exhaust type: Cigar · Flame tube attachment: Plug connection clamped · Mounting type: Screwed clamp
CHF 139.90
swiing® revival silent blocks Alu Racing | Sachs 503 / 504 / 505 / 535
Ø inside: 8.3 mm · Ø outside: 21.95 mm · Manufacturer: swiing® revival parts · Total length: 13 mm · Material: Aluminum · Surface: anodized · Nominal diameter inside: 8.5 mm · Ø Bundle: 26 mm · Alternative version of the Pony OEM number: A4286 · Alternative version of the Sachs OEM number: 0251 121 000
CHF 23.90
GPO 41 mm "Pomodoro" cylinder kit | Sachs 503
Nominal diameter: 41 mm · Manufacturer: GPO · Material: Gray cast iron · Crankshaft stroke: 43 mm · Displacement: 55 ccm · Hole spacing inlet: 32 mm · Ø cylinder neck: 45 mm · Ø outlet inside: 22 mm · Ø Outlet outside: 26 mm · Ø Inlet inside: 19 mm · Ø piston pin (B): 12 mm · Thread inlet: M6x1 (standard thread) · Area of application: Tuning · Hole pattern [mm]: 40 x 60 / 37 x 37 · Outlet type: clamped
CHF 179.90
Moped fans like you also bought:
swiing® ingenious 15 mm carburetor tuning camouflaged | Sachs 503
Manufacturer: swiing® ingenious parts · Component group Carburetor: Carburetor complete · Material: Aluminum · Nominal diameter: 15 mm · Carburetor type: SRE · Nozzle block: 2.17 · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Total length: 66 mm · Ø Air filter connection: 20 mm · Width: 50 mm · Mixed oil connection: No · Height: 95 mm · Vacuum connection: No · Choke control: Hand choke · Mounting type: Plug connection clamped · Camouflaged: Yes · Area of application: Tuning · Clamping screw torque (max.): 4 N/m
CHF 79.90
swiing® revival air filter Racing | Sachs 503
Manufacturer: swiing® revival parts · Material: Plastic · Color: black · Filter type: Racing screen · Ø Internal connection: 20 mm · Total length: 165 mm · Width: 68 mm · Height: 52 mm · Mounting type: Plug connection clamped · Camouflaged: No · Area of application: Tuning
CHF 59.90
swiing® ingenious 15 mm intake manifold long version | Sachs 503 2AL, 2BL
Manufacturer: swiing® ingenious parts · Material: Aluminum · Hole spacing inlet: 32 mm · Thread type: M6x1 (standard thread) · Total length: 70 mm · Ø inside: 15 mm · Total height: 80 mm · Height flange center hole: 70 mm · Ø External connection: 20 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Camouflaged: No · Area of application: Tuning · Pony OEM number: A2176
CHF 59.90
swiing® revival silent blocks Alu Racing | Sachs 503 / 504 / 505 / 535
Ø inside: 8.3 mm · Ø outside: 21.95 mm · Manufacturer: swiing® revival parts · Total length: 13 mm · Material: Aluminum · Surface: anodized · Nominal diameter inside: 8.5 mm · Ø Bundle: 26 mm · Alternative version of the Pony OEM number: A4286 · Alternative version of the Sachs OEM number: 0251 121 000
CHF 23.90
GPO piston 43 mm | Sachs 50/2, 50/3, 50/4
Manufacturer: GPO · Nominal diameter: 43 mm · Thick piston ring: 1.8 mm · Ø outside piston (A): 42.94 mm · Compression height (C): 27.7 mm · Curvature (D): 2.4 mm · Total piston height (E): 50.2 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Ø piston pin (B): 12 mm
CHF 44.90