Breaker without cable for various mopeds and small motorcycles with Bosch / Ducati ignitions.
This breaker can be installed on Puch Maxi S, Maxi N, Supermaxi LG1 / LG2, X30 Sport, X30 Velux, Sachs 50/2, 502, 503, Zündapp Belmondo mopeds, among others. It also fits various other models such as Tomos ST50 and Sport, Kreidler RS and GT as well as Hercules K50, SB1 and SB5 as well as Batavus T49 S, DKW RT 159 and Sachs Famo 50 engines.
This breaker has a reinforced spring and larger contact base. It was specially developed for engines with high engine speeds.
Ø axle: 4 mm
Ø mounting hole: 4.5 mm
Ø inside flywheel: 90 mm
Note: It is essential to apply a little breaker grease to the contact strip to minimize wear.
German quality product from the manufacturer BERU in original equipment quality.
Original BOSCH spare part number: 1 217 013 020
Original BERU spare part number: 0 340 100 466
| Manufacturer | BERU |
| Ø axle | 4 mm |
| Material | Steel |
| Cable available | No |
| Ø Internal flywheel | 90 mm |
| Ø mounting hole | 4.5 mm |
| Number of fixing points | 1 pcs |
| Area of application | Tuning |
| BOSCH OEM number | 1 217 013 020 |
| BERU OEM number | 0 340 100 466 |
| Puch | E50 ZA50 (air-cooled) ZA50 (fan-cooled) Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV 505 (with pedal shaft) - 1A (AT), 2A (HG) 535 |
| Zündapp Belmondo |
Ratings
Accessories & related products
BERU breaker without cable | Bosch / Ducati
Material: Steel · Number of fixing points: 1 pcs · Ø mounting hole: 4.5 mm · Manufacturer: BERU · Cable available: No · Ø axle: 4 mm · Area of application: Original · Area of application: Standard · Alternative version of the Pony OEM number: A4606 · Alternative version of the Sachs OEM number: 0983 106 000 · BOSCH OEM number: 1 217 013 021 · BOSCH OEM number: 1 217 013 022 · BOSCH OEM number: 1 217 013 015 · BERU OEM number: 0 340 100 465
CHF 14.90
BERU breaker without axle | Bosch ignition
Material: Steel · Number of fixing points: 1 pcs · Ø mounting hole: 4.5 mm · Manufacturer: BERU · Cable available: No · Ø axle: 4 mm · Area of application: Original · Area of application: Standard · Pony OEM number: A4606 · Sachs OEM no.: 0983 106 000 · BOSCH OEM number: 1 217 013 015 · BERU OEM number: 0 340 100 436
CHF 19.90
Hot 
swiing® revival screw-in condenser | Bosch / Ducati
Manufacturer: swiing® revival parts · Ø outside: 18 mm · Capacity: 0.16 µF · Thread type: M3x0.5 (standard thread) · Mounting type: Plug connection clamped · Connection type: Thread for screwing · Height: 23 mm · Total height: 32 mm · Area of application: Original · Area of application: Standard · BOSCH OEM number: 2 207 330 050
CHF 9.90
BOSCH Breaker without cable reinforced | Bosch / Ducati
Manufacturer: BOSCH · Material: Steel · Cable available: No · Ø axle: 4 mm · Ø Internal flywheel: 90 mm · Ø mounting hole: 4.5 mm · Number of fixing points: 1 pcs · Area of application: Tuning · Alternative version of the Pony OEM number: A4606 · Alternative version of the Sachs OEM number: 0983 106 000 · BOSCH OEM number: 1 217 013 020 · BERU OEM number: 0 340 100 466
CHF 20.90
swiing® revival ignition set 90 mm breaker clockwise 6V
Material: Aluminum · Manufacturer: GPO · Manufacturer: swiing® revival parts · Area of application: Original · Area of application: Standard · Tension: 6 V · Ø Internal flywheel: 90 mm · Mounting type: Screws · Direction of rotation: right · Ø mounting plate: 90 mm · Performance: 17 W · Number of fixing points: 4 pcs
CHF 199.90
swiing® revival ignition set 90 mm breaker left-turning 6V
Manufacturer: GPO · Manufacturer: swiing® revival parts · Material: Aluminum · Tension: 6 V · Performance: 17 W · Direction of rotation: left · Ø mounting plate: 90 mm · Ø Internal flywheel: 90 mm · Mounting type: Screws · Number of fixing points: 4 pcs · Area of application: Original · Area of application: Standard
CHF 199.90
Moped fans also bought
Hot
KMC drive chain 415H (reinforced) 128L
Chain type: 415H · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 128 pcs · Chain pitch: 1/2" x 3/16" · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Ø bore: 4 mm · Ø Pin: 3.94 mm
CHF 12.50
Hot
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Subcategory: Spark plug connector · Ø cable: 5 mm · Ø cable: 7 mm · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
CHF 8.80
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Nipple length: 5 mm · Area of application: Standard
CHF 2.40
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C · Area of application: Gearbox lubrication with clutch
CHF 9.90
CHF 22.00/l
Hot
Leonelli 6V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Type of current: Alternating current (AC) · Total length: 50 mm · Width: 27 mm · Height: 15 mm · Mounting type: Screws · Tension: 6 V · Performance: 50 W · Ø mounting hole: 6 mm
CHF 29.90
Hot
swiing® revival screw-in condenser | Bosch / Ducati
Manufacturer: swiing® revival parts · Ø outside: 18 mm · Capacity: 0.16 µF · Thread type: M3x0.5 (standard thread) · Mounting type: Plug connection clamped · Connection type: Thread for screwing · Height: 23 mm · Total height: 32 mm · Area of application: Original · Area of application: Standard · BOSCH OEM number: 2 207 330 050
CHF 9.90
Hot
swiing® revival 38 mm cylinder kit 1.6 hp CH12 "Original" | Puch
Nominal diameter: 38 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Surface: sandblasted · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 19 mm · Ø Inlet inside: 9 mm · Thread inlet: M6x1 (standard thread) · Area of application: Standard · Hole spacing inlet: 38 mm · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Camouflaged: Yes · Alternative version of the Puch OEM number: 349.7.10.105.0
CHF 104.90
Collection only possible with online purchase and appointment.
