44 mm tuning cylinder from the cult brand Autisa. Suitable for the Honda Camino, PX 50 and PXR 50 models.
This magnificent specimen is a relic of the last century!
This aluminum cylinder has a steel bushing which serves as a raceway.
Only a few examples available - secure your cylinder now.
Attention: The cylinder must be honed a little, the piston clearance is sometimes a little tight.
Scope of delivery as per pictures, without gaskets.
Product of the Spanish cult brand Autisa.
NOS – New from old stock.
| Manufacturer | Autisa |
| Material | Gray cast iron |
| Camouflaged | No |
| Surface | varnished |
| Nominal diameter | 44 mm |
| Ø piston pin (B) | 10 mm |
| Outlet type | slanted |
| Number of fixing points | 4 pcs |
| Thread outlet | M6x1 (standard thread) |
| Area of application | Tuning |
| Honda |
Moped fans also bought
swiing® ingenious pull-wire starter PVL ignition | Puch E50
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: raw · Ignition system: PVL · Ø outside: 130 mm · Width: 150 mm · Height: 80 mm · Color: Chrome · Total length: 170 mm · Hole spacing: 138 mm · Number of fixing points: 2 pcs
CHF 149.90
Cable set cut black high handlebars (1A quality) | Puch Maxi
Manufacturer: Made in Germany · Material: Steel · Color: black · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Quantity: 4 pcs · Total length: 1600 mm · Total length: 1650 mm · Total length: 1850 mm · Total length: 2200 mm · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
CHF 22.90
Not in stock
GPO Adjusting nozzle Bing SSB | Sachs
Manufacturer: GPO · Material: Brass · Component group Carburetor: Spraying · Surface: blank · Carburetor type: SSB · Quantity: 1 pcs · Total length: 65.7 mm · Drive: External hexagon · Nozzle type: Main nozzle · Nozzle thread: MF7x0.75 (fine pitch thread) · Width across flats SW: 11 mm
CHF 19.90
Clutch cable / brake cable Ø 1.5 mm x 225 cm (pear-shaped nipple)
Ø Stranded wire: 1.5 mm · Nipple shape: Pears · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Cable length: 2250 mm · Area of application: Standard · Number of components: 1 pcs · Piaggio OEM number: 270460
CHF 2.40
Fuel tap vertical M10x1 (to screw in) outgoing at the bottom / cast iron
Manufacturer: Made in Italy · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Mounting type: screw in (thread) · Ø fuel hose connection: 6 mm · Installation direction: vertical / vertical · Outlet direction: below · Spare tube shape: straight · Reserve level: 65 mm · Thread type: MF10x1 (fine pitch thread)
CHF 14.90
16 mm carburetor | Honda Camino PA 50
Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Nominal diameter: 16 mm · Ø Internal connection: 16 mm · Total length: 85 mm · Ø Output inside: 27.4 mm · Ø fuel hose connection: 5 mm · Vacuum connection: No · Mounting type: Stud bolts & nuts · Hole spacing inlet: 42.5 mm · Width: 75 mm · Height: 90 mm
CHF 44.90
Malossi gasket set 45.5 mm | Honda Camino 50, PX50
Manufacturer: Malossi · Material: Aluminum · Material: Copper · Material: Sealing paper · Number of components: 3 pcs · Thickness: 0.5 mm · Thickness: 3.5 mm · Ø cylinder: 45.5 mm · Hole pattern [mm]: 48 x 48 mm · Area of application: Tuning
CHF 12.90
Collection only possible with online purchase and appointment.
