43 mm replacement piston with two 1.5 mm rectangular piston rings with flank lock (FS) for Piaggio Ciao, Si, Bravo and Boxer mopeds / mopeds with 43 mm Athena cylinder kit.
The detailed dimensions of the piston according to the technical drawing can be found in the details. You can also find out about the relevant piston rings, their stems and locking types on the legend in the pictures.
Tolerance type: A
Note: We recommend that you check the length of the slot for the boost parts and reseat if necessary, as this often does not match the grooves in the cylinder.
The piston kit contains piston pins, piston clips and piston rings.
You will find the appropriate assembly tools, piston pin locks and, if necessary, the corresponding cylinder in the accessories section.
Quality product from the Italian manufacturer Athena.
| Manufacturer | Athena |
| Ø outside piston (A) | 42.9 mm |
| Compression height (C) | 26.52 mm |
| Curvature (D) | 2.4 mm |
| Total piston height (E) | 50.4 mm |
| Number of piston rings (F) | 2 pcs |
| Nominal diameter | 43 mm |
| Piston ring mold | Rectangular ring |
| Piston ring impact | Flank safety device (FS) |
| Piston ring height | 1.5 mm |
| Ø piston pin (B) | 10 mm |
| Tolerance group | A |
| Piston weight | 87 g |
| Piaggio | Ciao - P, SC, PX, C24 Si Bravo / Super Bravo Boxer Grillo |
Accessories & related products
GPO piston pin extractor Ø 10, 12, 14 mm
Manufacturer: GPO · Material: Steel · Surface: burnished · Area of application: (Dis)assembly tool · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Number of components: 7 pcs · Width across flats SW: 10 mm · Width across flats SW: 17 mm · Total length: 130 mm
CHF 19.90
Athena 43 mm cylinder kit without head 10 mm KoBo | Piaggio Ciao, SI, Bravo, Boxer
Nominal diameter: 43 mm · Manufacturer: Athena · Material: Aluminum · Area of application: Tuning · Surface: sandblasted · Displacement: 63 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 10 mm · Outlet type: clamped · Number of fixing points: 3 pcs · Decompressor: Yes · Camouflaged: No
CHF 174.90
Athena piston 43 mm (12 mm KoBo) #A | Piaggio Ciao, SI, Bravo, Boxer
Nominal diameter: 43 mm · Manufacturer: Athena · Ø outside piston (A): 42.93 mm · Compression height (C): 26.25 mm · Curvature (D): 4 mm · Total piston height (E): 52.6 mm · Number of piston rings (F): 2 pcs · Piston ring mold: L-ring · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring impact: Internal fuse (IS) · Piston ring height: 2 mm · Ø piston pin (B): 12 mm · Tolerance group: A
CHF 63.90
Moped fans also bought
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Thread type: M5x0.8 (standard thread) · Color: silver · Total length: 145 mm · Width: 105 mm · Mounting type: Nuts & bolts · Height: 5.3 mm · Ø mounting hole: 5 mm · Thread length: 8 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Number of fixing points: 2 pcs
CHF 10.90
Handlebar stem 15 cm curved with chrome strut
Manufacturer: Made in Germany · Material: Steel · Surface: chrome-plated · Ø outside: 22 mm · Clamping diameter: 25 mm · Length handlebar ends: 160 mm · Crossbar: Yes · Mounting type: Front boom mounting · Width: 700 mm · Height: 150 mm · Color: Chrome
CHF 32.90
SKF 6202 C3 ball bearing 15/35/11
Bearing cage: "-" Sheet steel cage ball-guided · Inner ring width: 11 mm · Manufacturer: SKF · Bearing clearance: C3 · Bearing type: Deep groove ball bearing · Ø outside: 35 mm · Ø inside: 15 mm · Stock number: 6202 · Width: 11 mm · Puch OEM number: 900.4.6202
CHF 9.90
swiing® revival engine overhaul kit with bearing selection | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Material: NBR · Material: Oiled paper · Material: Steel · Piaggio OEM number: 112967 · Piaggio OEM number: 113681 · Piaggio OEM number: 182519 · Piaggio OEM number: 241894 · Piaggio OEM number: 480464
CHF 25.50
Collection only possible with online purchase and appointment.
