Gasket set from Athena suitable for your Kreidler moped, moped and small motorcycle with 50 cc 4-speed engine.
The gasket set contains the following flat gaskets:
- 1 pc. Center gasket 0.3 mm (paper)
- 1 pc. Gearbox cover gasket 0.3 mm (paper)
- 1 pc. Cylinder base gasket 0.3 mm, 44 x 44 mm (paper)
- 1 pc. Cylinder head gasket 0.15 mm, 44 x 44 mm (aluminum)
- 1 pc. Inlet gasket 1 mm, hole spacing 42 mm (paper)
You can find more gaskets and sealants in the accessories section.
Quality product from the Italian manufacturer Athena.
| Manufacturer | Athena |
| Material | Sealing paper, Aluminum |
| Thickness | 0.3 mm, 0.15 mm, 1 mm |
| Number of components | 5 pcs |
| Kreidler |
Accessories & related products
Elring Dirko HT sealing compound gray (silicone) 70 ml permanently elastic up to 315°C
Manufacturer: Elring · Area of application: Chemistry · Material: Silicone · Contents: 70 ml · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Color: gray · Gap dimension (max.): 2 mm · Temperature resistance (min.): -60 - 315 °C
CHF 19.90
CHF 284.29/l
Elring Dirko HT sealing compound red (silicone) high temp. 70 ml elastic up to 315°C
Temperature resistance (min.): -60 - 300 °C · Manufacturer: Elring · Contents: 70 ml · Hazard warning: Causes serious eye irritation · Color: red · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Chemistry · Gap dimension (max.): 2 mm
CHF 22.90
CHF 327.14/l
Explore categories from Seals & gaskets
Moped fans also bought
Adhesive kit tank & frame black PVC carrier film | Puch Maxi S
Material: Polyvinyl chloride (PVC) · Place of use: Frame (+ tank) · Width: 123 mm · Width: 230 mm · Width: 330 mm · Height: 26 mm · Height: 60 mm · Height: 65 mm · Rear side texture: Adhesive · Color: black · Color: white · Consistency: UV-resistant · Consistency: petrol resistant · Transferfolie: No
CHF 9.40
swiing® ingenious puller L17 / BO15 / E15 shoulder bearing
Width across flats trigger: 8 mm · Width across flats trigger: 19 mm · Span: 24 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Number of components: 1 pcs · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: L17 · Area of application: (Dis)assembly tool · Surface: galvanized (blue) · Total length: 120 mm · Diameter: 24 mm · Diameter: 40.3 mm · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread)
CHF 43.90
swiing® revival clamping screw with slotted chain guard black | Pony GTX, GTA & KTM GP40
Thread type: Sheet metal screw · Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Total length: 29 mm · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Color: black · Ø External head: 19 mm · Nominal diameter (thread): 5 mm · Thread length: 18 mm · Width across flats: 19 mm · Pony OEM number: P0420
CHF 2.40
OMG Fuel valve labeled "M16x1" (with a cap nut), extending downward
Manufacturer: OMG · Possible lever positions: open / closed / reserve · Thread type: MF16x1 (fine pitch thread) · Material lever: Plastic · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: vertical / vertical · Outlet direction: below · Mounting type: Union nut · Spare tube shape: straight · Reserve level: 50 mm
CHF 16.90
BING 68° carburetor pipe bend M6x0.75 SRA / SSE NOS
Manufacturer: BING · Material: Aluminum · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SSE · Ø outside: 6 mm · Ø outside: 11.95 mm · Ø outside: 14.35 mm · Total length: 23.5 mm · Height: 28 mm · Internal thread: M5x0.8 (standard thread) · Angle: 68 °
CHF 22.30
40 mm cylinder kit tuning fan-cooled | Kreidler Florett Super TS, GT, TM
Nominal diameter: 40 mm · Material: Aluminum · Camouflaged: No · Area of application: Tuning · Surface: sandblasted · Ø Outlet outside: 32 mm · Hole spacing inlet: 32 mm · Thread inlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Ø piston pin (B): 14 mm · Hole pattern [mm]: 44 x 44 · Outlet type: clamped
CHF 239.90
Working late? Evening hours on Thursday until 20:00
