Special gear wheel for the transmission of mopeds, mopeds and small motorcycles with Sachs 503 and 50/2 (502) engines.
The gear wheel is designed and recalculated for second gear. Due to the increased number of teeth of 24 (instead of 22 / 23 teeth), the second gear is 9% or 4.5% shorter.
The «short first gear» that occurs with optimized timing and the resulting torque gap between 1st and 2nd gear is thus closed. This is particularly suitable for use in racing or with increased operating weight.
For perfect gear ratios, both gears (first and second gear with 24 teeth) can be replaced. This leads to a better and increased shift speed in second gear and ideally it can be shifted directly into resonance speed.
Note: if you install new transmission parts, you should check the transmission after approx.
If you install new transmission parts, you should carry out an oil change after approx. 100 km to remove any new, light abrasion from the gearbox.
You will find the corresponding gear wheel in addition to other suitable parts in the accessories section.
Quality product from the ADDY by Schöb Engineering brand.
| Manufacturer | ADDY |
| Material | Steel |
| Surface | burnished |
| Ø inside | 13 mm |
| Toothing type | straight toothed |
| Ø outside | 49.3 mm |
| Total length | 72.7 mm |
| Number of teeth | 24 pcs |
| Thickness | 8 mm |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 503 - 2AL / 2BL |
Ratings
Accessories & related products
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch
CHF 9.90
CHF 22.00/l
swiing® revival gasket 0.4 mm gearbox cover | Sachs 502, 50/2, 50/3, 50/4 (A1827)
Manufacturer: swiing® revival parts · Material: Sealing paper · Width: 130 mm · Total length: 210 mm · Color: sand-colored · Thickness: 0.4 mm · Number of fixing points: 5 pcs · Number of components: 1 pcs · Pony OEM number: A1827 · Sachs OEM no.: 0250 087 100
CHF 5.90
Moped fans also bought
Hot 
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Spark plug socket: M4 · Cable available: No · Color: silver · Suppressed: Yes · Resistance: 1000 Ω · Subcategory: Spark plug connector · Ø cable: 5 mm · Ø cable: 7 mm · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
CHF 8.80
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch
CHF 9.90
CHF 22.00/l
swiing® revival ball bearing countershaft | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A2531)
Bearing cage: "-" Sheet steel cage ball-guided · Stock number: E15 · Inner ring width: 25.6 mm · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Material: Steel · Ø inside: 15 mm · Bearing type: Deep groove ball bearing · Thread type: MF20.8x1 LH (fine/left-hand thread) · Ø outside: 35 mm · Width: 8 mm · Area of application: High End · Area of application: Standard · Pony OEM number: A2531 · Sachs OEM no.: 0286 079 105
CHF 49.90
swiing® ingenious ball bearing pinion shaft 15.5/31.5/8 | Sachs 502 AML, 50/2 ML, 50/3, 50/4
Bearing cage: Sheet steel cage · Manufacturer: swiing® ingenious parts · Dust protection type: 2RS1 - NBR contact seal on both sides · Material: Steel · Ø inside: 15.5 mm · Bearing type: Deep groove ball bearing · Ø outside: 31.5 mm · Width: 8 mm · Ball bearing closed: Yes
CHF 27.90
Collection only possible with online purchase and appointment.
