High-quality 6-volt bulb set including voltage regulator and Y-cable, suitable for Piaggio Ciao, Si, Bravo and Boxer mopeds / mopeds.
The set includes a 6V Leonelli voltage limiter, a single-pole 6 Volt P26s front light and a BA9s or E10 rear light with 6 V.
Thanks to the included transition cable, you don't have to cut up your original wiring harness or patch it up with solder terminals and other connectors. Simply connect the red cable lugs to the wiring harness and the black flat connector to the controller contact. To insulate the connection point, slide the heat-shrink tubing over the connection and shrink it together with a lighter or hot air gun.
Manufacturer: Leonelli · Material: Plastic, Aluminum · Tension: 6 V · Type of current: Alternating current (AC) · Performance: 50 W · Total length: 50 mm · Width: 27 mm · Height: 15 mm · Mounting type: Screws · Ø mounting hole: 6 mm
Number of cables: 2 pcs · Cable cross-section [mm²]: 1.5 mm² · Cable bifurcation to motor: 150 mm · Manufacturer: GPO
| Manufacturer | Leonelli, swiing® revival parts |
| Tension | 6 V |
| Color | white |
| Total length | 23 mm, 24 mm, 44 mm |
| Bulb holder | BA9s, E10, P26s |
| Ø base | 9 mm, 9.5 mm, 26 mm |
| Performance | 3 W, 4 W, 6 W, 15 W, 20 W |
| Test mark | none |
| Ø Lamp head | 9 mm, 11 mm, 25 mm |
| LED | No |
| Piaggio | Ciao - P, SC, PX, C24 Si Bravo / Super Bravo Boxer Grillo |
Accessories & related products
12V bulb set with Leonelli voltage regulator | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Leonelli · Manufacturer: swiing® revival parts · Test mark: none · Bulb holder: BA9s · Bulb holder: E10 · Bulb holder: P26s · Tension: 12 V · Performance: 3 W · Performance: 5 W · Performance: 15 W · Performance: 20 W · Color: white · Ø base: 9 mm · Ø base: 9.5 mm · Ø base: 26 mm · Total length: 23 mm · Total length: 24 mm · Total length: 44 mm · Ø Lamp head: 9 mm · Ø Lamp head: 11 mm · Ø Lamp head: 25 mm · LED: No
CHF 42.90
12V LED set with Leonelli voltage regulator | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Leonelli · Test mark: none · Color: white · Tension: 12 V · Bulb holder: BA9s · Bulb holder: E10 · Bulb holder: P26s · Ø base: 9 mm · Ø base: 9.5 mm · Ø base: 26 mm · Ø Lamp head: 9.5 mm · Ø Lamp head: 15 mm · Total length: 22 mm · Total length: 27 mm · Total length: 35 mm · LED: Yes
CHF 59.90
6V bulb set with GPO voltage regulator | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Manufacturer: swiing® revival parts · Bulb holder: BA9s · Bulb holder: E10 · Bulb holder: P26s · Color: white · Tension: 6 V · Performance: 3 W · Performance: 4 W · Performance: 6 W · Performance: 15 W · Performance: 20 W · Total length: 23 mm · Total length: 24 mm · Total length: 44 mm · Ø base: 9 mm · Ø base: 9.5 mm · Ø base: 26 mm · Test mark: none · Ø Lamp head: 9 mm · Ø Lamp head: 11 mm · Ø Lamp head: 25 mm · LED: No
CHF 32.90
Moped fans also bought
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Mounting type: Union nut · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Reserve level: 70 mm · Thread type: MF12x1 (fine pitch thread)
CHF 9.90
Tail light black | Piaggio Ciao PX, C24, Bravo
Manufacturer: Made in Italy · Material: Plastic · Bulb holder: BA9s · Mounting type: Nuts & bolts · Color: black · Color: red · Test mark: none · Width: 130 mm · Number of fixing points: 2 pcs · Height: 58 mm · Brake light: No · Battery operated: No · Reflectors: Yes · Depth: 43 mm
CHF 18.90
Collection only possible with online purchase and appointment.
