
High-quality 12 volt bulb set including voltage regulator and Y-cable, suitable for Piaggio Ciao, Si, Bravo and Boxer mopeds / mopeds with electronic 12 volt ignition.
The set includes a 12 V Leonelli voltage regulator, a single-pole 12 V P26s front light and a BA9s or E10 rear light with 12 V.
Thanks to the included transition cable, you don't have to cut up your original wiring harness or patch it up with solder terminals and other connectors. Simply connect the red cable lugs to the wiring harness and the black flat connector to the controller contact. To insulate the connection point, slide the heat-shrink tubing over the connection and shrink it together with a lighter or hot air gun.
Manufacturer: Leonelli · Material: Plastic, Aluminum · Tension: 12 V · Type of current: Alternating current (AC) · Performance: 100 W · Total length: 50 mm · Width: 27 mm · Height: 15 mm · Mounting type: Screws · Ø mounting hole: 6 mm
Number of cables: 2 pcs · Cable cross-section: 1.5 mm² · Cable bifurcation to motor: 150 mm · Manufacturer: GPO
| Manufacturer | Leonelli, swiing® revival parts |
| Bulb holder | BA9s, E10, P26s |
| Color | white |
| Performance | 3 W, 5 W, 15 W, 20 W |
| Ø base | 9 mm, 9.5 mm, 26 mm |
| Total length | 23 mm, 24 mm, 44 mm |
| Test mark | none |
| Tension | 12 V |
| Ø Lamp head | 9 mm, 11 mm, 25 mm |
| LED | No |
| Piaggio | Ciao - P , SC , PX , C24 Si Bravo / Super Bravo Boxer Grillo |
Accessories & related products
6V bulb set with Leonelli voltage regulator | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Leonelli · Manufacturer: swiing® revival parts · Test mark: none · Bulb holder: BA9s · Bulb holder: E10 · Bulb holder: P26s · Tension: 6 V · Performance: 3 W · Performance: 4 W · Performance: 6 W · Performance: 15 W · Performance: 20 W · Color: white · Ø base: 9 mm · Ø base: 9.5 mm · Ø base: 26 mm · Total length: 23 mm · Total length: 24 mm · Total length: 44 mm · Ø Lamp head: 9 mm · Ø Lamp head: 11 mm · Ø Lamp head: 25 mm · LED: No
CHF 37.90
12V LED set with Leonelli voltage regulator | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Leonelli · Test mark: none · Bulb holder: BA9s · Bulb holder: E10 · Bulb holder: P26s · Color: white · Tension: 12 V · Ø base: 9 mm · Ø base: 9.5 mm · Ø base: 26 mm · Total length: 22 mm · Total length: 27 mm · Total length: 35 mm · Ø Lamp head: 9.5 mm · Ø Lamp head: 15 mm · LED: Yes
CHF 59.90
6V bulb set with GPO voltage regulator | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Manufacturer: swiing® revival parts · Test mark: none · Bulb holder: BA9s · Bulb holder: E10 · Bulb holder: P26s · Tension: 6 V · Performance: 3 W · Performance: 4 W · Performance: 6 W · Performance: 15 W · Performance: 20 W · Color: white · Ø base: 9 mm · Ø base: 9.5 mm · Ø base: 26 mm · Total length: 23 mm · Total length: 24 mm · Total length: 44 mm · Ø Lamp head: 9 mm · Ø Lamp head: 11 mm · Ø Lamp head: 25 mm · LED: No
CHF 32.90
GPO 12V LED set with GPO voltage regulator | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Test mark: none · Bulb holder: BA9s · Bulb holder: E10 · Bulb holder: P26s · Tension: 12 V · Color: white · Ø base: 9 mm · Ø base: 9.5 mm · Ø base: 26 mm · Total length: 22 mm · Total length: 27 mm · Total length: 35 mm · Ø Lamp head: 9.5 mm · Ø Lamp head: 15 mm · LED: Yes
CHF 54.90
Explore categories from Electrics & light
Moped fans also bought
Inner cable Ø 1.2 mm x 200 cm with barrel nipple Ø 6 mm
Ø nipple: 6 mm · Manufacturer: Made in Germany · Material: Brass · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.2 mm · Cable length: 2000 mm · Nipple shape: Barrel (transverse) · Nipple length: 5.5 mm · Number of components: 1 pcs
CHF 3.40
EFFE Condenser with cable | Piaggio Ciao, SI, Bravo, Boxer
Ø outside: 18 mm · Manufacturer: EFFE · Area of application: Original · Area of application: Standard · Capacity: 0.26 µF · Mounting type: Tab for screwing · Connection type: Cable for screwing · Height: 26 mm · Ø mounting hole: 4.4 mm · Total height: 31 mm · Piaggio OEM number: 102939
CHF 11.90





