Extravagant custom license plate holder suitable for your Piaggio moped / moped with Swiss license plate.
The CNC-milled, black anodized license plate holder with «Piaggio» laser engraving is designed so that the license plate can be easily inserted and screwed to the number holder using the screws supplied.
Alternative number holders and various mounting pins for attaching the license plate to the wheel axle or to the bumper bolt can be found in the accessories section.
Excellent quality from the premium custom brand 66HEROES.
| Manufacturer | 66HEROES |
| Material | Aluminum |
| Surface | anodized |
| Thread type | M4x0.7 (standard thread) |
| Total length | 153 mm |
| Color | black |
| Mounting type | Nuts & bolts |
| Number of fixing points | 2 pcs |
| Width | 111 mm |
| Height | 8 mm |
| Hole spacing | 50 mm |
| Thread length | 12 mm |
| Ø mounting hole | 5.2 mm |
| Piaggio |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Color: blue · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Temperature resistance (min.): -75 - 200 °C · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
CHF 21.90
CHF 2’190.00/l
66HEROES License plate holder side left (CH version) Inox
Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Total length: 110 mm · Width: 58 mm · Height: 29 mm · Thread type: M5x0.8 (standard thread) · Thread length: 10 mm · Mounting type: Screwed clamp · Number of fixing points: 1 pcs
CHF 24.90
66HEROES Custom number frame "mofakult" black (CH version)
Manufacturer: 66HEROES · Material: Aluminum · Surface: anodized · Color: black · Total length: 7 mm · Width: 111 mm · Height: 153 mm · Thread type: M4x0.7 (standard thread) · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Hole spacing: 50 mm
CHF 39.90
66HEROES spring washer & M4 cam number holder Inox
Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Thread type: M4x0.7 (standard thread) · Thread length: 12 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Ø mounting hole: 4.5 mm
CHF 13.70
Explore categories from Number holder
Moped fans also bought
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Screw head: Lens head · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Number of components: 2 pcs · Ø Cable bushing: 1.6 mm · Drive: Slot · Ø outside: 5 mm · Total length: 6 mm · Thread length: 4 mm
CHF 2.00
Headlight black | Piaggio Ciao PX, C24
Manufacturer: Made in Italy · Test mark: none · Housing material: Plastic · Lens material: Plastic · Color: black · Bulb holder: P26s · Tension: 6 V · Tension: 12 V · Speedometer recording: 48 mm · Switch included: Yes · Battery operated: No · Ø External connection: 6.3 mm · Width: 125 mm · Height: 90 mm · Depth: 147 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Area of application: Original · Area of application: Standard · Piaggio OEM number: 584240
CHF 37.90
Not in stock
Hot 
Dell'Orto 13/13 SHA carburetor hand choke | Piaggio Ciao PX / C24, Bravo, SUPERbravo
Manufacturer: Dell'Orto · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Color: black · Carburetor type: SHA (Piaggio) · Nominal diameter: 13 mm · Ø Internal connection: 16 mm · Ø without reducing sleeve: 18 mm · Ø Inside entrance: 13 mm · Ø Output inside: 13 mm · Ø Air filter connection: 50.8 mm · Ø fuel hose connection: 5.2 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 66 · Mounting type: Plug connection clamped · Total length: 46 mm · Width: 60 mm · Height: 96 mm · Area of application: Tuning
CHF 59.90
Not in stock
Malossi air filter | Piaggio Ciao, SI, Bravo, Boxer
Width: 95 mm · Manufacturer: Malossi · Camouflaged: No · Material: Plastic · Color: black · Mounting type: Plug connection clamped · Filter type: Foam · Total length: 31.2 mm · Ø outside: 53.2 mm · Height: 88.7 mm · Ø Internal connection: 51 mm · Area of application: Tuning
CHF 19.90
Polini air filter | Piaggio Ciao, SI, Bravo, Boxer
Height: 94.7 mm · Width: 98 mm · Manufacturer: Polini · Total length: 29 mm · Camouflaged: No · Area of application: Tuning · Material: Plastic · Color: black · Filter type: Foam · Ø outside: 53 mm · Mounting type: Plug connection clamped · Ø Internal connection: 50.6 mm
CHF 14.90
66HEROES License plate holder side left (CH version) Inox
Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Total length: 110 mm · Width: 58 mm · Height: 29 mm · Thread type: M5x0.8 (standard thread) · Thread length: 10 mm · Mounting type: Screwed clamp · Number of fixing points: 1 pcs
CHF 24.90
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
