Black, front mudguard made of stainless steel for your Puch X30 NS, NL, NG-2AH, N-2AH, Puch X30-A, Puch Sprinter and Puch Supermaxi LG1 / LG2 moped / moped.
Since the front mudguard is folded on both sides, there are no sharp edges, which significantly reduces the risk of injury. Furthermore, it is still possible to use an edge protector or splash guard flap. Corresponding holes must still be drilled if required.
All original holes are provided for mounting the side and lower mudguard struts.
To mount cable guides, holes are also already incorporated on both sides of the mudguard.
Note: These are B-grade goods. Unfortunately, the mudguards were insufficiently protected during transportation. Therefore, scratches may be present. The black color should therefore be regarded as a primer rather than a final coat of paint. The folded ends may also have been finished a little more beautifully.
Further parts for your wheel fairing, such as paint polish or fastening material, can be found in the accessories section.
| Material | Chrome steel (colloquially known as stainless steel) |
| Surface | varnished |
| Color | black |
| Wheel size | 17 " |
| Folding the ends | closed folded |
| Shape of the mudguard | round |
| Total length over ends | 560 mm |
| Scope | 700 mm |
| Wide mudguard profile | 80 mm |
| Height of mudguard profile | 35 mm |
| Total height from support surface to top edge | 180 mm |
| Mounting type | Nuts & bolts |
| Puch |
Ratings
Accessories & related products
swiing® revival 17" front fender Inox | Puch X30 NS, NL, NG-2AH, N-2AH, Supermaxi LG1
Manufacturer: swiing® revival parts · Mounting type: Nuts & bolts · Color: Chrome · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Wheel size: 17 " · Folding the ends: closed folded · Shape of the mudguard: round · Total length over ends: 560 mm · Scope: 700 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 180 mm
CHF 59.90
swiing® revival 17" front fender "Retro" Inox black | Puch X30 NS, NL, NG-2AH, N-2AH, LG1/LG2
Manufacturer: swiing® revival parts · Mounting type: Nuts & bolts · Color: black · Material: Chrome steel (colloquially known as stainless steel) · Surface: varnished · Wheel size: 17 " · Folding the ends: closed folded · Shape of the mudguard: round · Total length over ends: 560 mm · Scope: 700 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 180 mm
CHF 59.90
GPO mudguard strut front 17" black
Manufacturer: GPO · Mounting type: Nuts & bolts · Color: black · Material: Steel · Surface: varnished · Wheel size: 17 " · Total length: 305 mm · Distance mudguard - center hole: 300 mm · Number of fixing points: 4 pcs · Ø mounting hole: 7 mm · Ø mounting hole: 12.5 mm
CHF 14.90
swiing® revival mudguard arch 17" front black
Manufacturer: swiing® revival parts · Mounting type: Nuts & bolts · Color: black · Outer width: 130 mm · Material: Steel · Surface: varnished · Wheel size: 17 " · Total length: 270 mm · Distance mudguard - center hole: 212 mm · Distance mudguard - center hole: 247 mm · Wide intake: 115 mm · Number of fixing points: 6 pcs · Ø mounting hole: 5.9 mm · Ø mounting hole: 6.3 mm · Hole spacing: 35 mm
CHF 19.90
Explore categories from Mudguard
Moped fans also bought
GPO chain tensioner | Puch Maxi S
Manufacturer: GPO · Color: black · Color: silver · Material: Plastic · Material: Steel · Thread type: M6x1 (standard thread) · Surface: galvanized (blue) · Number of teeth: 10 pcs · Ø outside sprocket: 36 mm · Total length: 175 mm · Number of fixing points: 1 pcs
CHF 9.90
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Color: black · Material: Steel · Surface: powder-coated · Number of teeth: 45 pcs · Ø bolt circle: 105.5 mm · Ø inside: 94 mm · Thickness: 4.5 mm · Number of fixing points: 6 pcs · Ø mounting hole: 6.7 mm · Hole spacing: 36.5 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm
CHF 19.90
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Number of components: 1 pcs · Manufacturer: Made in Germany · Material: Steel · Area of application: Standard · Surface: galvanized (blue) · Nipple length: 5 mm
CHF 2.40
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Color: silver · Material: Plastic · Material: Steel · Thread type: M5x0.8 (standard thread) · Surface: galvanized (blue) · Surface: raw · Total length: 47 mm · Total length: 60 mm · Drive: Slot · Drive: Triangular head · Thread length: 35 mm · Thread length: 50 mm
CHF 12.90
Not so nice 
Luggage carrier black | Puch Maxi S
Mounting type: Nuts & bolts · Color: black · Material: Steel · Surface: varnished · Wheel size: 17 " · Total length: 425 mm · Number of fixing points: 4 pcs · Ø mounting hole: 8.2 mm · Ø mounting hole: 8.8 mm · Hole spacing: 29 mm · Width: 168 mm · Height: 32 mm
CHF 19.90
GPO side bars black matt (1A quality) | Puch Maxi S
Manufacturer: GPO · Mounting type: Screws · Color: black · Material: Steel · Surface: varnished · Ø outside: 12.5 mm · Total length: 420 mm · Number of fixing points: 4 pcs · Ø mounting hole: 8.1 mm · Width: 170 mm · Hole spacing: 410 mm · Height: 35 mm
CHF 29.90
GPO mudguard strut front 17" black
Manufacturer: GPO · Mounting type: Nuts & bolts · Color: black · Material: Steel · Surface: varnished · Wheel size: 17 " · Total length: 305 mm · Distance mudguard - center hole: 300 mm · Number of fixing points: 4 pcs · Ø mounting hole: 7 mm · Ø mounting hole: 12.5 mm
CHF 14.90
swiing® revival mudguard arch 17" front black
Manufacturer: swiing® revival parts · Mounting type: Nuts & bolts · Color: black · Outer width: 130 mm · Material: Steel · Surface: varnished · Wheel size: 17 " · Total length: 270 mm · Distance mudguard - center hole: 212 mm · Distance mudguard - center hole: 247 mm · Wide intake: 115 mm · Number of fixing points: 6 pcs · Ø mounting hole: 5.9 mm · Ø mounting hole: 6.3 mm · Hole spacing: 35 mm
CHF 19.90
Collection only possible with online purchase and appointment.
