profile
All wishlists Community wishlists
Carousel Image 1
Carousel Image 2
Carousel Image 3
quenching-400px

Universal

27763

17.5 mm PHBG AS carburetor hand choke (Dell'Orto replica)

rating iconrating iconrating iconrating iconrating icon
No reviews
CHF 65.50

Incl. 8.1% VAT.

Description

Cost-effective replica of the Dell'Orto 17.5 mm PHBG AS carburetor for universal use on your moped, moped and small motorcycle.
This racing carburetor is suitable for tuning and is designed for racing bikes between 50 and 75 cc.

The tuning carburetor has a manually operated choke (starter slide / starter flap).
The fuel/air mixture can be perfectly adjusted using the main and secondary throttle bodies and the mixture adjustment screw.

The carburetor has an M32x1.25 thread on the air filter side.

Main throttle body size (M5): 82
Additional throttle body size (idle throttle body): -
Size choked: 55
Connection diameter air filter without intake funnel: 32 mm (M32 x 1.25)
Connection diameter intake manifold: 24 mm (resp. 26 mm after removing the reduction sleeve)
Total height: 120 mm
Total width: 75 mm
Total width: 60 mm

You can find suitable nozzles, air filters and intake manifolds in the accessories section.

Good-quality reproduction product from the Asian market.

Nominal diameter17.5 mm
ManufacturerQuenching
Area of applicationTuning
Component group CarburetorCarburetor complete
Carburetor typePHBG AS
Ø Internal connection24 mm
Ø without reducing sleeve26 mm
Ø Air filter connection32 mm
Air filter connection threadMF32x1.25 (fine pitch thread)
Total length75 mm
Width60 mm
Height120 mm
Ø fuel hose connection6 mm
Choke controlHand choke
Choke nozzle size55
Nozzle threadM5x0.8 (standard thread)
Nozzle size82
Mounting typePlug connection clamped

Accessories & related products

Dell'Orto gasket set carburetor PHBG
undefined

Universal

10493

Dell'Orto gasket set carburetor PHBG

Manufacturer: Dell'Orto · Component group Carburetor: Sealing, revising · Carburetor type: PHBG

CHF 11.90

GPO 18.5 mm intake manifold Dell'Orto PHBG | Puch E50
undefined

For: Puch

10659

GPO 18.5 mm intake manifold Dell'Orto PHBG | Puch E50

Manufacturer: GPO · Material: Aluminum · Area of application: Tuning · Surface: polished · Ø inside: 18.8 mm · Camouflaged: No · Ø External connection: 23.9 mm · Number of fixing points: 2 pcs · Total length: 40 mm · Total height: 57 mm · Height flange center hole: 45 mm · Hole spacing inlet: 38 mm · Color: Chrome · Mounting type: Screws

CHF 17.90

Gas cable Ø 1.2 mm x 165 cm (nipple ball) Dell'Orto
undefined

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Piaggio · Tomos · Cilo · Hercules

10703

Gas cable Ø 1.2 mm x 165 cm (nipple ball) Dell'Orto

Ø nipple: 3.5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.2 mm · Nipple shape: Ball · Cable length: 1650 mm

CHF 2.40

swiing® revival nozzle set M5 (70 - 92) Dell'Orto SHA, PHBG
undefined

For: Universal · Pony / Cilo (Beta 521 & 512) · Piaggio

10902

swiing® revival nozzle set M5 (70 - 92) Dell'Orto SHA, PHBG

Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Drive: Slot · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Total length: 8 mm · Nozzle type: Main nozzle · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 75 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92

CHF 20.90

Not in stock

swiing® revival nozzle set M5 (92 - 110) Dell'Orto SHA, PHBG
undefined

For: Universal · Pony / Cilo (Beta 521 & 512) · Piaggio

10903

swiing® revival nozzle set M5 (92 - 110) Dell'Orto SHA, PHBG

Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Material: Brass · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98 · Nozzle size: 100 · Nozzle size: 102 · Nozzle size: 104 · Nozzle size: 106 · Nozzle size: 108 · Nozzle size: 110 · Total length: 8 mm

CHF 20.90

- 11 %
Hot Hot
swiing® revival nozzle set M5 (50 - 70) Dell'Orto SHA, PHBG
undefined

For: Universal · Pony / Cilo (Beta 521 & 512) · Piaggio

12179

swiing® revival nozzle set M5 (50 - 70) Dell'Orto SHA, PHBG

Drive: Slot · Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Quantity: 10 pcs · Nozzle type: Main nozzle · Total length: 8 mm · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 55 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70

CHF 20.90

CHF 18.50

swiing® revival nozzle M5 (30 - 120 of your choice) Dell'Orto SHA, PHBG
undefined
angle-right

For: Universal · Pony / Cilo (Beta 521 & 512) · Piaggio · Tomos

22000

swiing® revival nozzle M5 (30 - 120 of your choice) Dell'Orto SHA, PHBG

Drive: Slot · Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Total length: 8 mm · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 30 · Nozzle size: 31 · Nozzle size: 32 · Nozzle size: 33 · Nozzle size: 34 · Nozzle size: 35 · Nozzle size: 36 · Nozzle size: 37 · Nozzle size: 38 · Nozzle size: 39 · Nozzle size: 40 · Nozzle size: 41 · Nozzle size: 42 · Nozzle size: 43 · Nozzle size: 44 · Nozzle size: 45 · Nozzle size: 46 · Nozzle size: 47 · Nozzle size: 48 · Nozzle size: 49 · Nozzle size: 50 · Nozzle size: 51 · Nozzle size: 52 · Nozzle size: 53 · Nozzle size: 54 · Nozzle size: 55 · Nozzle size: 56 · Nozzle size: 57 · Nozzle size: 58 · Nozzle size: 59 · Nozzle size: 60 · Nozzle size: 61 · Nozzle size: 62 · Nozzle size: 63 · Nozzle size: 64 · Nozzle size: 65 · Nozzle size: 66 · Nozzle size: 67 · Nozzle size: 68 · Nozzle size: 69 · Nozzle size: 70 · Nozzle size: 71 · Nozzle size: 72 · Nozzle size: 73 · Nozzle size: 74 · Nozzle size: 75 · Nozzle size: 76 · Nozzle size: 77 · Nozzle size: 78 · Nozzle size: 79 · Nozzle size: 80 · Nozzle size: 81 · Nozzle size: 82 · Nozzle size: 83 · Nozzle size: 84 · Nozzle size: 85 · Nozzle size: 86 · Nozzle size: 87 · Nozzle size: 88 · Nozzle size: 89 · Nozzle size: 90 · Nozzle size: 91 · Nozzle size: 92 · Nozzle size: 93 · Nozzle size: 94 · Nozzle size: 95 · Nozzle size: 96 · Nozzle size: 97 · Nozzle size: 98 · Nozzle size: 99 · Nozzle size: 100 · Nozzle size: 101 · Nozzle size: 102 · Nozzle size: 103 · Nozzle size: 104 · Nozzle size: 105 · Nozzle size: 106 · Nozzle size: 107 · Nozzle size: 108 · Nozzle size: 109 · Nozzle size: 110 · Nozzle size: 111 · Nozzle size: 112 · Nozzle size: 113 · Nozzle size: 114 · Nozzle size: 115 · Nozzle size: 116 · Nozzle size: 117 · Nozzle size: 118 · Nozzle size: 119 · Nozzle size: 120

CHF 3.50

Dell'Orto secondary nozzle PHBG (size 30 - 70) of your choice
undefined
angle-right

Universal

27204

Dell'Orto secondary nozzle PHBG (size 30 - 70) of your choice

Drive: Slot · Manufacturer: Dell'Orto · Material: Brass · Component group Carburetor: Spraying · Carburetor type: PHBG · Nozzle type: Secondary nozzle · Nozzle size: 30 · Nozzle size: 35 · Nozzle size: 40 · Nozzle size: 45 · Nozzle size: 50 · Nozzle size: 55 · Nozzle size: 60 · Nozzle size: 65 · Nozzle size: 70

CHF 4.90

swiing® ingenious air filter Dell'Orto PHBG with screw thread
undefined
angle-right

Universal

35679

swiing® ingenious air filter Dell'Orto PHBG with screw thread

Ø outside: 58 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Thread type: MF32x1.25 (fine pitch thread) · Color: graphite colors · Total length: 25 mm · Mounting type: Thread for screwing · Camouflaged: No

CHF 44.90

Explore categories from Carburetor

S-10-40-060-10_Bing
Bing / swiing®
S-10-40-060-20_DellOrto
Dell'Orto
S-10-40-060-30_Stage6
Stage6
S-10-40-060-40_Polini
Polini
S-10-40-060-50_Keihin
Keihin
S-10-40-060-60_Mikuni
Mikuni
S-10-40-060-70_Solex
Solex
S-10-40-060-75_Gurtner
Gurtner
S-10-40-060-80_Sonstige
Other

Moped fans also bought

Hot Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
undefined

For: Universal · Puch · Sachs · Zündapp Belmondo · Tomos · Alpa Chopper / Turbo · DKW · ILO / JLO · Kreidler · MBK / Motobécane · Miele · Monark · Victoria · Zündapp

10173

Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing

Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm

CHF 2.40

Hot Hot
Motorex Automatic Motor Oil (ATF) 450 ml
undefined

For: Universal · Puch · Sachs · Tomos · Bye Bike

10366

Motorex Automatic Motor Oil (ATF) 450 ml

Manufacturer: Motorex · Area of application: Gearbox lubrication with clutch · Contents: 450 ml · Gearbox type: Automatic machine · Temperature resistance (min.): -45 - 200 °C · Pony OEM number: A2080 · Sachs OEM no.: 0263 014 002

CHF 10.90

CHF 24.22/l

GPO 18.5 mm intake manifold Dell'Orto PHBG | Puch E50
undefined

For: Puch

10659

GPO 18.5 mm intake manifold Dell'Orto PHBG | Puch E50

Manufacturer: GPO · Material: Aluminum · Area of application: Tuning · Surface: polished · Ø inside: 18.8 mm · Camouflaged: No · Ø External connection: 23.9 mm · Number of fixing points: 2 pcs · Total length: 40 mm · Total height: 57 mm · Height flange center hole: 45 mm · Hole spacing inlet: 38 mm · Color: Chrome · Mounting type: Screws

CHF 17.90

Gas cable Ø 1.2 mm x 165 cm (nipple ball) Dell'Orto
undefined

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Piaggio · Tomos · Cilo · Hercules

10703

Gas cable Ø 1.2 mm x 165 cm (nipple ball) Dell'Orto

Ø nipple: 3.5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.2 mm · Nipple shape: Ball · Cable length: 1650 mm

CHF 2.40

swiing® revival nozzle set M5 (70 - 92) Dell'Orto SHA, PHBG
undefined

For: Universal · Pony / Cilo (Beta 521 & 512) · Piaggio

10902

swiing® revival nozzle set M5 (70 - 92) Dell'Orto SHA, PHBG

Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Drive: Slot · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Total length: 8 mm · Nozzle type: Main nozzle · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 75 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92

CHF 20.90

Not in stock

AKOA 21 mm intake manifold Dell'Orto PHBG plastic | Puch E50 / Z50 / ZA50 (wind cooled)
undefined

For: Puch

10977

AKOA 21 mm intake manifold Dell'Orto PHBG plastic | Puch E50 / Z50 / ZA50 (wind cooled)

Manufacturer: AKOA · Area of application: Tuning · Material: Plastic · Ø inside: 20.7 mm · Mounting type: Screws · Ø External connection: 26 mm · Color: black-matt · Number of fixing points: 2 pcs · Hole spacing inlet: 38 mm

CHF 29.90

Intake manifold 46 / 47 mm cylinder | Puch

For: Universal · Puch

11848

Intake manifold 46 / 47 mm cylinder | Puch

Total height: 75 mm · Material: Aluminum · Total length: 60 mm · Ø inside: 19 mm · Area of application: Tuning · Mounting type: Screws · Number of fixing points: 2 pcs · Height flange center hole: 65 mm · Hole spacing inlet: 38 mm · Ø External connection: 24 mm · Camouflaged: No

CHF 39.90

Hot Hot
Inner cable set automatic | Puch E50
undefined

For: Puch

18185

Inner cable set automatic | Puch E50

Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Total length: 1600 mm · Total length: 2200 mm

CHF 9.90

Polini 30° air filter Air Box Ø 32 mm
undefined

Universal

20115

Polini 30° air filter Air Box Ø 32 mm

Manufacturer: Polini · Area of application: Tuning · Filter type: Foam · Ø Internal connection: 32 mm · Mounting type: Plug connection clamped · Color: black · Color: blue · Angle: 30 ° · Total length: 110 mm · Camouflaged: No

CHF 34.90