Socket axle M12x218 made of galvanized steel for your moped, moped and small motorcycle.
The axle can be used for both front wheels and rear wheels. Due to the large width, it is increasingly used as a rear wheel axle. If necessary, the threaded shaft must be shortened on both sides.
The complete rear axle set is also equipped with the following parts:
- 2 pieces of M12 x 1 nuts (SW19 / 10 mm)
- 1 piece of spacer washer (Ø 24 x 2.8 mm)
- 2 pieces of bearing cone (D20 x d14 mm / SW17)
- 2 pieces of bearing shells (Ø outside: 29.3 / Ø inside: 26 mm / Ø bore: 15.5 mm / length: 9.2 mm)
- 1 piece M12 x 1 nuts (SW17 / 5 mm)
- 2 pieces dust ring (Ø outer: 29.15 mm / Ø inner: 20.5 mm / thickness: 0.4 mm)
To ensure that you can enjoy your new axle for a long time, we recommend that you order the higher-quality swiing cones in the accessories section at the same time.
You can find more axle parts in the accessories section.
| Material | Steel |
| Surface | galvanized (blue) |
| Thread type | MF12x1 (fine pitch thread) |
| Ø shaft | 12 mm |
| Shank length | 71 mm |
| Total length | 218 mm |
| Thread length | 78 mm |
| Puch |
| Sachs |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Color: blue · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Area of application: Chemistry · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
CHF 21.90
CHF 2’190.00/l
66HEROES cap nut M12x1 stainless steel polished
Manufacturer: 66HEROES · Material: Chrome steel (known as Nirosta®) · Surface: polished · Nut type: Cap nut · Thread type: MF12x1 (fine pitch thread) · Drive: External hexagon · Width across flats: 17 mm · Height: 26.2 mm · Thread depth: 23.4 mm
CHF 11.90
Moped fans also bought
Hot 
KMC drive chain 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Number of chain links: 128 pcs · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Color: gray · Ø bore: 4 mm · Ø Pin: 3.94 mm
CHF 12.50
Hot
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Spark plug socket: M4 · Cable available: No · Color: silver · Suppressed: Yes · Resistance: 1000 Ω · Subcategory: Spark plug connector · Ø cable: 5 mm · Ø cable: 7 mm · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
CHF 8.80
Hot
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Cable length: 2200 mm · Number of components: 1 pcs · Area of application: Standard
CHF 2.40
Nut M12x1 x 5 SW19 Wheel nut galvanized
Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut 0.5D · Drive: External hexagon · Height: 5.8 mm · Area of application: Standard · Thread type: MF12x1 (fine pitch thread) · Width across flats: 19 mm · Strength class: 8 · Pony OEM number: A4249 · Sachs OEM no.: 0242 124 000
CHF 1.80
FAG 16101 A 2RS wheel bearing 12/30/8
Bearing type: Deep groove ball bearing · Bearing cage: "-" Sheet steel cage ball-guided · Stock number: 16101 · Inner ring width: 8 mm · Manufacturer: FAG · Ball bearing closed: Yes · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CN (standard) · Groove ring: No · Material: Plastic · Material: Steel · Surface: blank · Ø outside: 30 mm · Ø inside: 12 mm · Area of application: Standard · Width: 8 mm
CHF 14.70
Collection only possible with online purchase and appointment.
