Socket axle M12x195 made of blackened steel for your moped, moped and small motorcycle.
The threaded shaft can be used for both front wheels and rear wheels. On one side, the axle has a chamfered double edge with a width of 8.1 mm
Note: The brushed surface does not provide permanent rust protection and should therefore be treated with rust inhibitor.
Rust sealant and suitable nuts can be found in the accessories
Good-quality reproduction product from the Asian market.
| Total length | 195 mm |
| Manufacturer | Quenching |
| Ø shaft | 11.8 mm |
| Material | Steel |
| Surface | burnished |
| Thread type | MF12x1 (fine pitch thread) |
| Thread length | 25 mm, 21 mm |
| Shank length | 149 mm |
| Puch |
| Sachs |
Ratings
Accessories & related products
Nut M12x1 x 10 SW19 Wheel nut Inox
Material: Chrome steel (colloquially known as stainless steel) · Height: 10 mm · Surface: blank · Nut type: Hexagon nut 1D · Drive: External hexagon · Thread type: MF12x1 (fine pitch thread) · Width across flats: 19 mm · Strength class: A2-70 · Area of application: Standard
CHF 3.90
66HEROES cap nut M12x1 stainless steel polished
Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Nut type: Cap nut · Drive: External hexagon · Height: 26.2 mm · Width across flats: 17 mm · Thread type: MF12x1 (fine pitch thread) · Thread depth: 23.4 mm
CHF 11.90
Moped fans also bought
swiing® revival bottom bracket bushing nylon | Puch Maxi, X30 Sport, Velux, NG-2AH
Manufacturer: swiing® revival parts · Ø outside: 20.2 mm · Material: Nylon · Surface: blank · Color: black · Bearing type: Plain bearing · Total length: 19 mm · Ø inside: 16.2 mm · Ø Bundle: 24.1 mm · Puch OEM number: 349.1.42.005.1
CHF 2.50
Nut M12x1 x 10 SW19 Wheel nut galvanized
Material: Steel · Surface: galvanized (blue) · Thread type: MF12x1 (fine pitch thread) · Nut type: Hexagon nut · Width across flats: 19 mm · Drive: External hexagon · Height: 10 mm · Thread depth: 10 mm · Strength class: 8 · Area of application: Standard
CHF 2.00
Hot 
Leonelli 12V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Type of current: Alternating current (AC) · Total length: 50 mm · Width: 27 mm · Height: 15 mm · Mounting type: Screws · Tension: 12 V · Performance: 100 W · Ø mounting hole: 6 mm
CHF 34.90
Nut M12x1 x 10 SW19 Wheel nut Inox
Material: Chrome steel (colloquially known as stainless steel) · Height: 10 mm · Surface: blank · Nut type: Hexagon nut 1D · Drive: External hexagon · Thread type: MF12x1 (fine pitch thread) · Width across flats: 19 mm · Strength class: A2-70 · Area of application: Standard
CHF 3.90
Karcoma fuel filter plastic small
Manufacturer: Karcoma · Ø outside: 20 mm · Material: Plastic · Color: transparent · Color: white · Filter type: Plastic net · Total length: 23.4 mm · Total length: 50 mm · demountable: No · Ø inside: 3 mm · Ø fuel hose connection: 4.9 mm · Ø fuel hose connection: 6 mm
CHF 5.80
Oil seal NBR 17/33/7 B DUO crankshaft | Sachs 503 AB, ADV
Shaft seal type: B DUO - With sheet metal outer casing / two sealing lips. · Manufacturer: Sachs · Ø outside: 33 mm · Material: NBR · Width: 7 mm · Ø inside: 17 mm · Place of use: Crankshaft · Temperature resistance (min.): -30 - 100 °C
CHF 8.90
Shaft seal NBR 14.96x31.5x3.5 Pinion shaft | Sachs 502, 50/2, 503 (A1134)
Manufacturer: Sachs · Ø outside: 31.5 mm · Material: NBR · Surface: coated · Width: 3.5 mm · Ø inside: 14.96 mm · Place of use: Pinion shaft · Temperature resistance (min.): -30 - 100 °C · Area of application: Standard · Pony OEM number: A1134 · Sachs OEM no.: 0230 011 100 · Sachs OEM no.: 0230 011 200
CHF 7.50
Collection only possible with online purchase and appointment.
