The world has never seen pedals like these before!
The solid aluminum pedals can be folded in. This saves you a whole 6 cm.
This may not seem like much, but it can be crucial when space is tight or during transportation.
With non-slip tread with cams on both sides.
Thread: 9/16"
Length: 115 mm
Width: 85 mm
Height: 27 mm
The reflectors on the sides contribute to road safety.
We recommend mounting the folding pedals with Loctite threadlocker.
In addition, a flat fork wrench is required for assembly.
Both products can be found in the accessories section below.
Price per pair.
Included in delivery are two additional aluminum washers for spacing.
Quality product from the manufacturer wellgo.
| Manufacturer | wellgo |
| Material | Aluminum, Plastic |
| Surface | coated |
| Thread type | FG14.3 (9/16" 20G) |
| Color | black |
| Total length | 115 mm |
| Width | 85 mm |
| Height | 27 mm |
| Width across flats | 15 mm |
| Reflectors | Yes |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m · Area of application: Chemistry
CHF 21.90
CHF 2’190.00/l
Moped fans also bought
Hot 
GPO chain tensioner | Puch Maxi S
Manufacturer: GPO · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Number of teeth: 10 pcs · Color: black · Color: silver · Total length: 175 mm · Ø outside sprocket: 36 mm · Number of fixing points: 1 pcs
CHF 9.90
Hot
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Mounting type: Union nut
CHF 9.90
swiing® revival seal Float SRE, SRC, SRF, SRA
Manufacturer: swiing® revival parts · Component group Carburetor: Sealing, revising · Material: Sealing paper · Ø inside: 41 mm · Ø outside: 45 mm · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Thickness: 1.5 mm · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
CHF 2.80
Transval speedometer drive 16" with bracket 11 mm axle (for VDO speedometer cable)
Place of use: left · Place of use: right · Manufacturer: Transval · Material: Aluminum · Color: gray · Wheel size: 16 " · Ø outside: 41 mm · Thread type: MF10x1 (fine pitch thread) · 4-edge speedometer cable: 2.6 mm · Overall width outside: 50 mm · Ø axle: 11 mm · Ø mounting hole: 11 mm · Total height: 52 mm
CHF 27.90
Dell'Orto 12/12 SHA carburetor hand choke | Piaggio Ciao PX, C24
Nominal diameter: 12 mm · Manufacturer: Dell'Orto · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SHA (Piaggio) · Color: black · Ø Internal connection: 16 mm · Total length: 55 mm · Ø without reducing sleeve: 18 mm · Ø Inside entrance: 12 mm · Ø Output inside: 12 mm · Ø Air filter connection: 50.6 mm · Ø fuel hose connection: 5.1 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Width: 60 mm · Choke control: Hand choke · Height: 110 mm · Nozzle thread: M5x0.8 (standard thread) · Mounting type: Plug connection clamped · Nozzle size: 48 · Area of application: Tuning
CHF 64.90
Not in stock
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
