Socket axle M11x180 made of heavy-duty, galvanized special steel with cones and nuts for various rear wheels with cast spokes on your Puch moped / moped.
The complete threaded shaft set is also equipped with the following parts:
- 3 pieces of M11 x 1 nuts (SW19 / 10 mm)
- 4 pieces of washers (11.2/20/2 mm)
- 2 pieces of swiing bearing cone M11 (D18 x H14.15 mm / SW15)
- 2 pieces of M11 x 1 nuts (SW17 / 4 mm)
- 1 piece of spacer (12.3/19x6 mm)
&p;reworked version of the previously offered wheel axle. Both the axle and the cones are made of high-quality material that can withstand high loads.
The ends of the wheel axle are chamfered and the thread is perfectly cut. This makes it easy to fit the cones and wheel nuts.
Other axle parts can be found in the accessories section.
Nostalgic product for the highest demands from the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | galvanized (blue) |
| Total length | 180 mm |
| Thread type | MF11x1 (fine pitch thread) |
| Ø shaft | 10.95 mm |
| Thread length | 75 mm |
| Shank length | 30 mm |
| Width across flats SW | 19 mm |
| Puch |
Accessories & related products
swiing® revival wheel axle set M11x180 mm spoke rear wheel | Puch Maxi, X30
Manufacturer: swiing® revival parts · Material: Steel · Thread type: MF11x1 (fine pitch thread) · Surface: galvanized (blue) · Total length: 180 mm · Thread length: 75 mm · Shank length: 30 mm · Width across flats SW: 15 mm · Width across flats SW: 17 mm · Width across flats SW: 19 mm · Ball bearing closed: No
CHF 39.90
CIF wheel axle set M11x1 x 200 mm galvanized
Manufacturer: CIF · Material: Steel · Surface: galvanized (blue) · Height: 2 mm · Height: 4 mm · Height: 10 mm · Total length: 200 mm · Thread type: MF11x1 (fine pitch thread) · Ø shaft: 10.3 mm · Thread length: 92 mm · Shank length: 14.5 mm · Ball bearing closed: No · Ø ball [inch] / [mm]: 1/4" (6.35 mm) · Width across flats SW: 15 mm · Width across flats SW: 17 mm
CHF 14.90
Bearing cone M11x1 mm
Width across flats SW: 15 mm · Thread type: MF11x1 (fine pitch thread) · Height: 12 mm · Material: Steel · Surface: gas nitrided · Ø outside: 19 mm · Ø ball [inch] / [mm]: 1/4" (6.35 mm) · Ø ball [inch] / [mm]: 3/16" (4.78 mm) · Ø ball [inch] / [mm]: 7/32" (5.56 mm) · Color: graphite colors
CHF 7.90
66HEROES cap nut M11x1 stainless steel polished
Manufacturer: 66HEROES · Material: Chrome steel (known as Nirosta®) · Nut type: Cap nut · Height: 26.2 mm · Thread type: MF11x1 (fine pitch thread) · Surface: polished · Drive: External hexagon · Width across flats SW: 17 mm · Thread depth: 23.4 mm
CHF 11.90
swiing® revival wheel bearing set M11x1
Manufacturer: swiing® revival parts · Material: Steel · Thread type: MF11x1 (fine pitch thread) · Surface: gas nitrided · Diameter: 17.95 mm · Height: 10.6 mm · Height: 14.15 mm · Ø inside: 25.85 mm · Ø outside: 29 mm · Width across flats SW: 15 mm · Ø ball [inch] / [mm]: 7/32" (5.56 mm)
CHF 43.90
Moped fans also bought
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Thread type: MF12x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Mounting type: Union nut · Spare tube shape: curved · Reserve level: 70 mm
CHF 9.90
NTN wheel bearing 12/28/8 rear cast hub Leleu | Puch Maxi
Material: Plastic · Material: Steel · Surface: blank · Bearing type: Deep groove ball bearing · Bearing cage: "-" Sheet steel cage ball-guided · Stock number: 6001 · Inner ring width: 12 mm · Manufacturer: NTN · Ball bearing closed: Yes · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CM (special/noise-reduced) · Groove ring: No · Width: 8 mm · Ø outside: 28 mm · Area of application: Standard · Ø inside: 12 mm
CHF 5.90
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom | Puch Maxi S, N
Possible lever positions: open / closed / reserve · Material lever: Aluminum · Filter type: Plastic net · Thread type: MF12x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Mounting type: Union nut · Spare tube shape: curved · Reserve level: 70 mm · Puch OEM number: 349.3.22.030.0 · Puch OEM number: 349.4.22.030.0
CHF 9.90
swiing® revival wheel axle set M11x1 x 180 cast rear wheel | Puch Maxi, X30
Manufacturer: swiing® revival parts · Material: Steel · Surface: burnished · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Total length: 180 mm · Thread length: 75 mm · Shank length: 30 mm · Width across flats SW: 15 mm · Width across flats SW: 17 mm · Width across flats SW: 19 mm · Ball bearing closed: No · Ø ball [inch] / [mm]: 7/32" (5.56 mm)
CHF 49.90
Collection only possible with online purchase and appointment.
