Stainless steel retaining plates for securing gear rings with a 5-hole mounting pattern and 72° pitch on your moped equipped with a Grimeca hub.
The pre-stressed plates are used to secure the bolts on the drive ring. During installation, two plates must be stacked on top of each other. To do this, the locking tab on the lower plate must be cut off or tapped straight.
Number of plates: 3 pcs.
Thickness: 1 mm
Pitch: 72°
Bolt circle diameter: 115 mm
Number of mounting points: 5 pcs.
Material: Chrome steel (commonly known as “Nirosta”)
You can find matching sprockets and screw sets in the accessories section.
A nostalgic product meeting the highest standards from the swiing® quality brand.
| Manufacturer | swiing® revival parts |
| Material | Chrome steel (colloquially known as stainless steel) |
| Number of lobes | 6 pcs |
| Ø bolt circle | 115 mm |
| Thickness | 1 mm |
| Universal |
| Puch |
| Sachs |
Accessories & related products
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Manufacturer: ESJOT · Chain type: 415H · Ø Pin: 4 mm · Material: Steel · Surface: blank / oiled · Color: gray · Rolling circumference: 1448 mm · Chain pitch: 1/2" x 3/16" · Number of chain links: 114 pcs · Chain lock type: Spring lock · Ø bore: 4.05 mm
CHF 18.90
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Temperature resistance (min.): -75 - 200 °C · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Chemistry · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
CHF 21.90
CHF 2’190.00/l
ESJOT Gear Ring 51 T. 5-Hole Grimeca, Galvanized
Manufacturer: ESJOT · Chain type: 415H · Material: Steel · Surface: galvanized (blue) · Color: silver · Number of teeth: 51 pcs · Ø inside: 98 mm · Chain pitch: 1/2" x 3/16" · Ø mounting hole: 6.5 mm · Number of fixing points: 5 pcs · Cranking (offset): 8 mm
CHF 39.90
ESJOT 45-tooth Grimeca 5-hole sprocket, galvanized
Manufacturer: ESJOT · Chain type: 415H · Material: Steel · Surface: galvanized (blue) · Color: silver · Number of teeth: 45 pcs · Ø inside: 98 mm · Chain pitch: 1/2" x 3/16" · Ø bolt circle: 115 mm · Ø mounting hole: 6.5 mm · Number of fixing points: 5 pcs · Cranking (offset): 8 mm
CHF 39.90
ESJOT Gear Ring 41 T. 5-Hole Grimeca
Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Surface: galvanized (blue) · Color: silver · Number of teeth: 41 pcs · Ø inside: 98 mm · Chain pitch: 1/2" x 3/16" · Ø bolt circle: 115 mm · Number of fixing points: 5 pcs · Ø mounting hole: 6.5 mm · Cranking (offset): 8 mm
CHF 39.90
Moped fans also bought
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Ø outside: 8 mm · Thread type: M6x1 (standard thread) · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Thread length: 7 mm · Total length: 15 mm · Screw head: Hexagon · Ø Bundle: 6 mm · Width across flats: 7 mm · Area of application: Standard
CHF 2.50
swiing® revival rear fender Inox | Pony GTX, GTA (P1616)
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Color: Chrome · Folding the ends: closed folded · Folding the ends: not folded · Shape of the mudguard: partly round · Total length over ends: 615 mm · Mounting type: Nuts & bolts · Scope: 890 mm · Wide mudguard profile: 78 mm · Height of mudguard profile: 36 mm · Total height from support surface to top edge: 268 mm · Wheel size: 17 "
CHF 49.90
swiing® revival wheel axle M11x1 x 180 | Piaggio Boxer
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø shaft: 10.95 mm · Shank length: 30 mm · Thread type: MF11x1 (fine pitch thread) · Thread length: 75 mm · Total length: 180 mm · Piaggio OEM number: 135693
CHF 16.90
Working late? Evening hours on Thursday until 20:00
