Dust ring suitable for all bicycles with Sachs HR 90 V hubs, which are installed on Sachs 50/2, Sachs 503, Puch X30 Sport NS / NL, Puch X30 Velux and Zündapp Belmondo mopeds / mopeds, among others.
The cover is pressed into the driver, it may only be pressed in so deeply that the bearing ring underneath can still rotate freely.
Note: Due to the long production time of the drivers, there were tolerance deviations and different designs. This type A dust ring is especially suitable for drivers with a very fine chamfer on the inside.
For drivers with an approx. 1 mm wide chamfer, use the type B dust ring.
| Manufacturer | swiing® revival parts |
| Ø inside | 20.4 mm |
| Ø outside | 28.2 mm |
| Height | 4.2 mm |
| Puch OEM number | 320.5.41.012.1 |
| Sachs OEM no. | F1652 |
| Puch |
| Sachs |
| Zündapp Belmondo |
| Cilo |
Ratings
Accessories & related products
swiing® revival wheel bearing 25/37/6.3 coaster wheel
Bearing cage: "-" Sheet steel cage ball-guided · Stock number: K042 · Inner ring width: 25 mm · Manufacturer: swiing® revival parts · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Area of application: Standard · Bearing type: Ball ring · Width: 6.8 mm · Ø inside: 25 mm · Ø outside: 36 mm · Ball bearing closed: No
CHF 7.90
swiing® revival ball bearing 14/27/6.3 coaster brake driver
Bearing cage: "-" Sheet steel cage ball-guided · Stock number: K1052 · Inner ring width: 7 mm · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Surface: blank · Bearing type: Ball ring · Ø inside: 14 mm · Ø outside: 27 mm · Ball bearing closed: No
CHF 6.90
swiing® revival wheel axle M10.5x1 x 175 coaster brake (with groove) galvanized
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF10.5x1 (fine pitch thread) · Ø shaft: 10.5 mm · Shank length: 95.6 mm · Total length: 175 mm · Thread length: 34 mm · Thread length: 45 mm
CHF 29.90
Moped fans also bought
swiing® revival wheel bearing 25/37/6.3 coaster wheel
Bearing cage: "-" Sheet steel cage ball-guided · Stock number: K042 · Inner ring width: 25 mm · Manufacturer: swiing® revival parts · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Area of application: Standard · Bearing type: Ball ring · Width: 6.8 mm · Ø inside: 25 mm · Ø outside: 36 mm · Ball bearing closed: No
CHF 7.90
swiing® revival wheel nut M10.5x1 x 10 SW17 coaster brake Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Surface: blank · Area of application: Standard · Nut type: Hexagon nut 1D · Thread type: MF10.5x1 (fine pitch thread) · Drive: External hexagon · Height: 10 mm · Width across flats: 17 mm
CHF 6.90
swiing® revival ball bearing 14/27/6.3 coaster brake driver
Bearing cage: "-" Sheet steel cage ball-guided · Stock number: K1052 · Inner ring width: 7 mm · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Ø ball: 6.34 mm · Groove ring: No · Material: Steel · Surface: blank · Bearing type: Ball ring · Ø inside: 14 mm · Ø outside: 27 mm · Ball bearing closed: No
CHF 6.90
swiing® revival wheel axle M10.5x1 x 175 coaster brake Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Thread type: MF10.5x1 (fine pitch thread) · Ø shaft: 10.5 mm · Shank length: 95.6 mm · Total length: 175 mm · Thread length: 34 mm · Thread length: 45 mm
CHF 29.90
swiing® revival wheel axle M10.5x1 x 175 coaster brake (with groove) galvanized
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF10.5x1 (fine pitch thread) · Ø shaft: 10.5 mm · Shank length: 95.6 mm · Total length: 175 mm · Thread length: 34 mm · Thread length: 45 mm
CHF 29.90
Collection only possible with online purchase and appointment.
