Hardened deco valve made of special steel, suitable for the cylinder head on your Piaggio Ciao, Si, Bravo and Boxer moped / moped.
Note: For better sealing, the valve pin can be ground into the cylinder head using a slotted bit and grinding paste.
The decorative pin is not suitable for newer Malossi cylinder heads.
You can find more decompressor parts in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
Original Piaggio spare part number: 113245
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | gas nitrided |
| Total length | 50.35 mm |
| Piaggio OEM number | 113245 |
| Piaggio | Ciao - P , SC , PX , C24 Si Bravo / Super Bravo Boxer Grillo Gilera CBA Gilera Citta |
Ratings
Accessories & related products
swiing® revival decompressor set | Piaggio Ciao, Bravo, Boxer
Manufacturer: swiing® revival parts · Area of application: Original · Material: Spring steel · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Surface: gas nitrided · Piaggio OEM number: 012768 · Piaggio OEM number: 113242 · Piaggio OEM number: 113244 · Piaggio OEM number: 113245 · Piaggio OEM number: 113246 · Piaggio OEM number: 113247
CHF 19.90
Explore categories from Cylinder
Moped fans also bought
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Drive: Slot · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Ø Cable bushing: 1.6 mm · Total length: 6 mm · Screw head: Lens head · Number of components: 2 pcs · Ø outside: 5 mm · Thread type: M4x0.7 (standard thread) · Thread length: 4 mm
CHF 2.00
Hot 
Leonelli 12V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Width: 27 mm · Type of current: Alternating current (AC) · Tension: 12 V · Height: 15 mm · Total length: 50 mm · Performance: 100 W · Ø mounting hole: 6 mm · Mounting type: Screws
CHF 34.90
Transval speedometer drive 16" bracket with grease nipple
Ø mounting hole: 11 mm · Manufacturer: Transval · Material: Aluminum · Place of use: left · Place of use: right · Color: gray · Ø axle: 11 mm · 4-edge speedometer cable: 2.6 mm · Overall width outside: 50 mm · Ø outside: 41 mm · Wheel size: 16 " · Total height: 52 mm · Thread type: MF10x1 (fine pitch thread)
CHF 27.90
Stand 14 mm axle (1A quality) | Piaggio Ciao PX, C24
Manufacturer: Made in Italy · Material: Steel · Surface: varnished · Color: black · Stand base - center mount (A): 232 mm · Total width of stand base (B): 200 mm · Wide receptacle (C): 78 mm · Ø Receptacle (D): 14 mm · Wide upright foot (F): 20 mm · Total height: 250 mm
CHF 29.90
Dell'Orto 13/13 SHA carburetor | Piaggio SI, Boss, Grillo
Nominal diameter: 13 mm · Manufacturer: Dell'Orto · Total length: 55 mm · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SHA (Piaggio) · Color: black · Ø fuel hose connection: 5.2 mm · Ø fuel hose connection: 6 mm · Area of application: Tuning · Ø without reducing sleeve: 18 mm · Ø Inside entrance: 13 mm · Ø Internal connection: 16 mm · Width: 60 mm · Ø Output inside: 13 mm · Height: 118 mm · Ø Air filter connection: 50.8 mm · Mounting type: Plug connection clamped · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Camouflaged: No · Nozzle size: 66
CHF 69.90
Collection only possible with online purchase and appointment.
