Original crankshaft suitable for your Puch X30 Sport NS/NL and Puch Maxi S2 mopeds / mopeds with manually shifted and windage-cooled Z50 engine.
High-quality and precisely fitting crankshaft, which has proven itself in various load tests.
The standard shaft was designed for use in original engines.
Revised version of the previously offered crankshaft with improved balance ratio and therefore smoother running characteristics.
The needle bearing is included in the scope of delivery.
Note: This crankshaft is not suitable for blown Z50 engines on Puch X30 Velux models.
| Dimension needle bearing | 12 / 15 x 14.2 mm (axe 12) |
| Manufacturer | swiing® revival parts |
| Thread type | MF10x1 (fine pitch thread) |
| Area of application | Standard |
| Material | Steel |
| Cheek type | standard |
| Crankshaft stroke | 43 mm |
| Ø piston pin (B) | 12 mm |
| Connecting rod length center-center | 90 mm |
| Total length of crankpin on clutch side | 57 mm |
| Number of gears | 2 pcs |
| Total length crankpin ignition side | 66 mm |
| Ø crank webs | 69.9 mm |
| Ø Connecting rod eye | 15 mm |
| Weight | 892 g |
| Ø Bearing seat (clutch side) | 17 mm |
| Thread length | 7 mm, 13 mm |
| Ø Bearing seat (ignition side) | 17 mm |
| Wide crank webs | 34 mm |
| Length 1st paragraph | 20 mm |
| Length 2nd paragraph | 19 mm |
| Ø 1st step (on the coupling side) | 17 mm |
| Ø 2nd shoulder (on the clutch side) | 15 mm |
| Length of shoulder (ignition side) | 26.3 mm |
| Puch | Z50 (X30 Sport) |
Accessories & related products
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift
CHF 10.90
CHF 24.22/l
swiing® revival spacer set crankshaft L17 | Puch Z50
Ø inside: 17.1 mm · Nominal diameter inside: 17 mm · Thickness: 0.1 mm · Thickness: 0.15 mm · Thickness: 0.2 mm · Thickness: 0.25 mm · Thickness: 0.3 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: blank / oiled · Ø outside: 23.8 mm
CHF 8.90
swiing® ingenious crankshaft "High End" | Puch X30 NS / NL (Z50)
Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Manufacturer: swiing® ingenious parts · Thread length: 10 mm · Thread length: 13 mm · Material: Aluminum · Area of application: Racing · Material: Steel · Area of application: Tuning · Cheek type: Full cheeks · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Connecting rod length center-center: 90 mm · Number of gears: 2 pcs · Total length of crankpin on clutch side: 57 mm · Total length crankpin ignition side: 66 mm · Ø crank webs: 70 mm · Ø Connecting rod eye: 15 mm · Weight: 954 g · Ø Bearing seat (clutch side): 17 mm · Thread type: MF10x1 (fine pitch thread) · Ø Bearing seat (ignition side): 17 mm · Wide crank webs: 34 mm · Length 1st paragraph: 20 mm · Length 2nd paragraph: 19 mm · Ø 1st step (on the coupling side): 17 mm · Ø 2nd shoulder (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.3 mm
CHF 164.90
Serrated lock washer M10 galvanized
Material: Steel · Surface: galvanized (blue) · Ø inside: 4.5 mm · Ø inside: 5.5 mm · Ø inside: 6.35 mm · Ø inside: 7.4 mm · Ø inside: 10.8 mm · Ø inside: 12.8 mm · Thread size: M10 · Thread size: M12 · Thread size: M4 · Thread size: M5 · Thread size: M6 · Thread size: M7 · Thread size: M8
CHF 0.30
Nut M10x1 low
Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut 0.5D · Drive: External hexagon · Thread type: MF10x1 (fine pitch thread) · Height: 5 mm · Nominal diameter (thread): 10 mm · Width across flats: 17 mm · Pony OEM number: A1493 · Pony OEM number: A1513 · Sachs OEM no.: 0242 000 001 · Sachs OEM no.: 0242 102 001
CHF 2.40
Explore categories from Engine block
Moped fans also bought
swiing® revival gasket set Z50 engine | Puch X30 NS / NL
Manufacturer: swiing® revival parts · Number of components: 10 pcs · Material: Sealing paper · Ø outlet inside: 22 mm · Hole spacing inlet: 32 - 38 mm · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm · Area of application: Standard
CHF 19.90
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift
CHF 10.90
CHF 24.22/l
swiing® revival engine gasket | Puch Z50 engine X30 NS, NL
Thickness: 0.4 mm · Width: 167 mm · Manufacturer: swiing® revival parts · Number of components: 1 pcs · Material: Sealing paper · Color: sand-colored · Ø inside: 74 mm · Total length: 240 mm · Number of fixing points: 12 pcs · Puch OEM number: 349.1.10.231.1
CHF 5.60
swiing® revival spacer set crankshaft L17 | Puch Z50
Ø inside: 17.1 mm · Nominal diameter inside: 17 mm · Thickness: 0.1 mm · Thickness: 0.15 mm · Thickness: 0.2 mm · Thickness: 0.25 mm · Thickness: 0.3 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: blank / oiled · Ø outside: 23.8 mm
CHF 8.90
Working late? Evening hours on Thursday until 20:00
