Montageanleitung 
Hot 
The high-quality 38 mm original cylinder is now also available exclusively with «Vertex» pistons.
This cylinder fits various Puch mopeds / mopeds such as Maxi S / N, Puch X30 NS / NL, Puch X30 NG-2A.
Vertex pistons are world-renowned for their quality and design.
With this cylinder, you will reach your destination quickly and powerfully.
- The intake window has been moved slightly downwards to achieve better timing
- Lubrication holes on the piston to the piston pin.
- The inner flats on the piston were milled flat for clean guidance of the connecting rod bearing
- The piston skirt has been optimized
- The inlet angles of the transfer ports have been adjusted
- Intake and exhaust largely milled flat (exhaust and intake manifold can be fitted without any problems)
With these optimizations, the 38 mm cylinder kit delivers a full 1.6 hp to the rear tire with the correct setting. This makes it the most powerful 38 mm cylinder with seal for Puch ever!
Of course, the original «CH12» is also cast in.
Note: Please note the installation direction when assembling. The piston is inserted with the arrow pointing towards the outlet on the exhaust side.
Attention: This cylinder is a reproduction product which is not approved for use on public roads.
Nostalgic product for the highest demands of the quality brand swiing®.
| Nominal diameter | 38 mm |
| Manufacturer | swiing® revival parts |
| Material | Aluminum |
| Displacement | 50 ccm |
| Crankshaft stroke | 43 mm |
| Area of application | Standard |
| Surface | sandblasted |
| Ø cylinder neck | 48 mm |
| Ø outlet inside | 20 mm |
| Ø Inlet inside | 9 mm |
| Ø piston pin (B) | 12 mm |
| Hole pattern [mm] | 44 x 44 |
| Thread inlet | M6x1 (standard thread) |
| Hole spacing inlet | 38 mm |
| Number of fixing points | 4 pcs |
| Decompressor | Yes |
| Outlet type | straight |
| Hole spacing outlet | 42 mm |
| Thread outlet | M6x1 (standard thread) |
| Camouflaged | Yes |
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Accessories & related products
Hot
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Area of application: Standard · Ø cylinder: 38 mm · Surface: sandblasted · Width: 125 mm · Height: 55 mm · Total length: 135 mm · Hole pattern [mm]: 44 x 44 · Candle thread: short · Number of fixing points: 4 pcs · Decompressor: No
CHF 32.90
swiing® revival stud bolt M6x106 (10.9 strength class)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Total length: 106 mm · Thread length: 12 mm · Thread length: 20 mm · Nominal diameter (thread): 6 mm · Thread type: M6x1 (standard thread) · Puch OEM number: 360.1.10.034.1
CHF 1.80
GPO gasket set cylinder original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Material: Sealing paper · Ø cylinder: 38 mm · Ø outlet inside: 20 mm · Thickness: 0.39 mm · Thickness: 0.4 mm · Thickness: 0.45 mm · Thickness: 1.7 mm · Hole pattern [mm]: 44 x 44 mm · Hole spacing inlet: 32 - 38 mm · Number of components: 4 pcs · Hole spacing outlet: 42 mm · Decompressor: Yes · Area of application: Standard
CHF 7.40
swiing® revival piston 38 mm Vertex | Puch
Nominal diameter: 38 mm · Manufacturer: Vertex · Manufacturer: swiing® revival parts · Ø outside piston (A): 37.96 mm · Compression height (C): 22.45 mm · Curvature (D): 3.5 mm · Total piston height (E): 50.45 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Ø piston pin (B): 12 mm · Piston ring height: 1.5 mm · Thick piston ring: 1.6 mm · Tolerance group: A · Weight piston kit: 71 g
CHF 59.90
swiing® ingenious needle roller bearing 12/15/14.2 original silver cage
Bearing type: Needle roller and cage assembly · Manufacturer: swiing® ingenious parts · Bearing cage: Silver cage · Width: 14.2 mm · Ø inside: 12 mm · Ø outside: 15 mm · Dimension needle bearing: 12/15 x 14.2 · Alternative version of the Pony OEM number: A4222 · Tomos OEM number: 035548 · Alternative version of the Sachs OEM number: 0232 157 001
CHF 11.90
Explore categories from Cylinder
Moped fans also bought
Hot
BERU spark plug connector 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Ø cable: 5 mm · Ø cable: 7 mm · Spark plug socket: M4 · Cable available: No · Resistance: 1000 Ω · Subcategory: Spark plug connector · Suppressed: Yes · Color: silver · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
CHF 8.80
Hot
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Area of application: Standard · Ø cylinder: 38 mm · Surface: sandblasted · Width: 125 mm · Height: 55 mm · Total length: 135 mm · Hole pattern [mm]: 44 x 44 · Candle thread: short · Number of fixing points: 4 pcs · Decompressor: No
CHF 32.90
GPO Gasket Set for E50 Engine | Puch Maxi S, N
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Ø outlet inside: 19.9 mm · Hole pattern [mm]: 44 x 44 · Hole spacing inlet: 32 - 38 mm · Decompressor: Yes · Hole spacing outlet: 42 mm · Number of components: 7 pcs
CHF 9.90
Hot
swiing® revival 12 mm carburetor "original" | Puch
Nominal diameter: 12 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Width: 50 mm · Carburetor type: SRE · Mounting type: Plug connection clamped · Ø Internal connection: 20 mm · Color: gray · Area of application: Standard · Ø Inside entrance: 12 mm · Ø Output inside: 12 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Total length: 65 mm · Mixed oil connection: No · Vacuum connection: No · Height: 108 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.15 · Nozzle size: 52 · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0
CHF 69.90
swiing® revival 12 mm intake manifold | Puch E50
Manufacturer: swiing® revival parts · Material: Aluminum · Area of application: Original · Mounting type: Screws · Ø External connection: 20 mm · Ø inside: 12 mm · Total length: 45.5 mm · Number of fixing points: 2 pcs · Hole spacing inlet: 38 mm · Height flange center hole: 43 mm · Camouflaged: No · Total height: 53 mm
CHF 34.90
swiing® revival 12 mm carburetor set "original" | Puch E50
Manufacturer: swiing® revival parts · Camouflaged: No · Component group Carburetor: Carburetor complete · Nominal diameter: 12 mm · Carburetor type: SRE · Hole spacing inlet: 38 mm · Ø Inside entrance: 12 mm · Ø Output inside: 12 mm · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Ø fuel hose connection: 6 mm · Mounting type: Flange · Mounting type: Plug connection clamped · Choke control: Hand choke · Area of application: Standard · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 52 · Clamping screw torque (max.): 4 N/m
CHF 94.90
GPO 38 mm cylinder head Racing high-compression | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Area of application: Tuning · Ø cylinder: 38 mm · Surface: sandblasted · Width: 125 mm · Height: 55 mm · Ø screw holder: 7.4 mm · Total length: 135 mm · Hole pattern [mm]: 45 x 45 · Candle thread: short · Number of fixing points: 4 pcs · Decompressor: No
CHF 49.90
Working late? Evening hours on Thursday until 20:00
