Front steel fender with a black primer finish for your Puch Maxi S or N moped with 17-inch rims.
Since the fender is folded at the front, there are no sharp edges in the direction of travel, which significantly reduces the risk of injury.
All original holes are present for mounting the lower fender struts and the upper tube bend.
The holes on both sides of the fender are intended for mounting the original cable guides.
Furthermore, there are four holes for mounting an edge guard or splash guard flap.
Last but not least, there are also two additional holes on the top for general-purpose use, such as mounting a decorative figure.
Shape: semi-circular
Width of fender profile (A): 80 mm
Height of fender profile (B): 40 mm
Ends: closed, folded / unfolded
Material: steel, black-primed
Total height from mounting surface to top edge (C): 185 mm
Total length across ends (D): 570 mm
Circumference (E): 715 mm
The fender is only primed, so it may have minor scratches.
You can find other parts related to your bike fairing, such as paint polish or mounting hardware, in the accessories section.
A nostalgic product meeting the highest standards from the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | primed |
| Color | black |
| Wheel size | 17 " |
| Folding the ends | closed folded, not folded |
| Shape of the mudguard | partly round |
| Total length over ends | 570 mm |
| Mounting type | Nuts & bolts |
| Scope | 715 mm |
| Wide mudguard profile | 80 mm |
| Height of mudguard profile | 40 mm |
| Total height from support surface to top edge | 185 mm |
| Puch |
Accessories & related products
GPO mudguard strut front 17" black
Manufacturer: GPO · Material: Steel · Surface: varnished · Color: black · Wheel size: 17 " · Distance mudguard - center hole: 300 mm · Mounting type: Nuts & bolts · Total length: 305 mm · Number of fixing points: 4 pcs · Ø mounting hole: 7 mm · Ø mounting hole: 12.5 mm
CHF 14.90
Not in stock
swiing® revival mudguard arch 17" front black
Color: black · Manufacturer: swiing® revival parts · Wide intake: 115 mm · Material: Steel · Surface: varnished · Wheel size: 17 " · Outer width: 130 mm · Distance mudguard - center hole: 212 mm · Distance mudguard - center hole: 247 mm · Ø mounting hole: 5.9 mm · Ø mounting hole: 6.3 mm · Total length: 270 mm · Hole spacing: 35 mm · Mounting type: Nuts & bolts · Number of fixing points: 6 pcs
CHF 19.90
Explore categories from Mudguard
Moped fans also bought
Hot 
EBR fork reinforced black | Puch
Manufacturer: EWC · Material: Steel · Surface: chrome-plated · Color: Chrome · Color: black · Adjustable: No · Ø spars: 28 mm · Spar end distance (center-center): 140 mm · Ø outer head tube: 26 mm · Ø head tube inside: 22 mm · Head tube length: 180 mm · Total length: 580 mm · Fork bridge - center wheel axle: 381 mm · Distance brake cam to wheel axle center-center: 40 mm · Thread type: MF26x1 (fine pitch thread) · Thread length: 57 mm
CHF 132.90
Hot
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: silver · Drive: Slot · Drive: Triangular head · Thread type: M5x0.8 (standard thread) · Thread length: 35 mm · Thread length: 50 mm · Total length: 47 mm · Total length: 60 mm
CHF 12.90
Bumm mirror round Inox black
Mirror property: none · Manufacturer: Bumm · Material: Steel · Surface: varnished · Color: black-matt · Ø mirror surface: 98 mm · Ø mirror rod: 8 mm · Mirror rod length: 300 mm · Total length: 350 mm · Thread type: M8x1.25 (standard thread) · Thread size: M8 · Clamping diameter: 22 mm · Test mark: none
CHF 29.90
GPO mudguard strut front 17" black
Manufacturer: GPO · Material: Steel · Surface: varnished · Color: black · Wheel size: 17 " · Distance mudguard - center hole: 300 mm · Mounting type: Nuts & bolts · Total length: 305 mm · Number of fixing points: 4 pcs · Ø mounting hole: 7 mm · Ø mounting hole: 12.5 mm
CHF 14.90
Not in stock
swiing® revival mudguard arch 17" front black
Color: black · Manufacturer: swiing® revival parts · Wide intake: 115 mm · Material: Steel · Surface: varnished · Wheel size: 17 " · Outer width: 130 mm · Distance mudguard - center hole: 212 mm · Distance mudguard - center hole: 247 mm · Ø mounting hole: 5.9 mm · Ø mounting hole: 6.3 mm · Total length: 270 mm · Hole spacing: 35 mm · Mounting type: Nuts & bolts · Number of fixing points: 6 pcs
CHF 19.90
Working late? Evening hours on Thursday until 20:00
