Aluminum stroke plate for your Piaggio Ciao, Si, Bravo, Boxer, Boss, Grillo and Gilera moped / moped.
The spacer is mounted under the cylinder base. The "lifting" of the cylinder increases the intake and exhaust timing. Accordingly, the same distance of the spacer should be turned down at the top of the cylinder
so that the original squish edge dimension and compression ratio are maintained.
Material thickness (selection): 0.5 / 1.0 / 1.5 / 2.0 / 3.0 mm
Material: aluminum
Ø cylinder neck: 46 mm
Number of attachment points: 3 pieces
Matching cylinders, sealant and alternative stroke plates in various thicknesses can be found in the accessories section.
Exclusive product for the highest demands of the quality brand swiing®.
| Thickness | 0.5 mm, 1 mm, 1.5 mm, 2 mm, 3 mm |
| Manufacturer | swiing® ingenious parts |
| Place of use | Cylinder base |
| Material | Aluminum |
| Surface | raw |
| Ø cylinder | 46 mm |
| Area of application | Tuning |
| Piaggio | Ciao - P , SC , PX , C24 Si Bravo / Super Bravo Boxer Grillo |
Accessories & related products
Athena 38.4 mm cylinder kit without head 12 mm KoBo | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Athena · Material: Aluminum · Camouflaged: No · Area of application: Tuning · Surface: sandblasted · Crankshaft stroke: 43 mm · Displacement: 50 ccm · Nominal diameter: 38.4 mm · Number of fixing points: 3 pcs · Ø piston pin (B): 12 mm · Outlet type: clamped · Decompressor: Yes
CHF 159.90
Elring Dirko HT sealing compound red (silicone) high temp. 70 ml elastic up to 315°C
Manufacturer: Elring · Area of application: Chemistry · Color: red · Contents: 70 ml · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Gap dimension (max.): 2 mm · Temperature resistance (min.): -60 - 300 °C
CHF 22.90
CHF 327.14/l
swiing® ingenious lift plate 3 mm aluminum | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: raw · Place of use: Cylinder base · Thickness: 0.5 mm · Thickness: 1 mm · Thickness: 1.5 mm · Thickness: 2 mm · Thickness: 3 mm · Ø cylinder: 46 mm · Area of application: Tuning
CHF 14.90
swiing® ingenious lift plate 2 mm aluminum | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: raw · Place of use: Cylinder base · Thickness: 0.5 mm · Thickness: 1 mm · Thickness: 1.5 mm · Thickness: 2 mm · Thickness: 3 mm · Ø cylinder: 46 mm · Area of application: Tuning
CHF 14.90
swiing® ingenious lifting plate 1.5 mm aluminum | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: raw · Place of use: Cylinder base · Thickness: 0.5 mm · Thickness: 1 mm · Thickness: 1.5 mm · Thickness: 2 mm · Thickness: 3 mm · Ø cylinder: 46 mm · Area of application: Tuning
CHF 14.90
swiing® ingenious lifting plate 1 mm aluminum | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: raw · Place of use: Cylinder base · Thickness: 0.5 mm · Thickness: 1 mm · Thickness: 1.5 mm · Thickness: 2 mm · Thickness: 3 mm · Ø cylinder: 46 mm · Area of application: Tuning
CHF 14.90
swiing® ingenious lift plate 0.5 mm aluminum | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: raw · Place of use: Cylinder base · Thickness: 0.5 mm · Thickness: 1 mm · Thickness: 1.5 mm · Thickness: 2 mm · Thickness: 3 mm · Ø cylinder: 46 mm · Area of application: Tuning
CHF 14.90
swiing® ingenious Cylinder Head Gasket, 38 mm, Copper | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® ingenious parts · Material: Copper · Place of use: Cylinder head · Thickness: 0.5 mm · Nominal diameter: 38 mm · Ø inside: 39 mm · Ø cylinder: 38.2 mm · Ø cylinder: 38.4 mm · Ø cylinder: 38.6 mm · Ø cylinder: 38.8 mm · Ø cylinder: 39 mm
CHF 5.90
Explore categories from Cylinder
Moped fans also bought
Inner cable Ø 1.2 mm x 200 cm with barrel nipple Ø 6 mm
Surface: galvanized (blue) · Ø nipple: 6 mm · Manufacturer: Made in Germany · Material: Brass · Area of application: Standard · Material: Steel · Number of components: 1 pcs · Ø Stranded wire: 1.2 mm · Nipple shape: Barrel (transverse) · Nipple length: 5.5 mm · Cable length: 2000 mm
CHF 3.40
Hot 
Dell'Orto 13/13 SHA carburetor hand choke | Piaggio Ciao PX / C24, Bravo, SUPERbravo
Nominal diameter: 13 mm · Manufacturer: Dell'Orto · Material: Aluminum · Component group Carburetor: Carburetor complete · Color: black · Carburetor type: SHA (Piaggio) · Total length: 46 mm · Width: 60 mm · Nozzle size: 66 · Ø without reducing sleeve: 18 mm · Ø Inside entrance: 13 mm · Ø Internal connection: 16 mm · Height: 96 mm · Mounting type: Plug connection clamped · Ø Output inside: 13 mm · Ø Air filter connection: 50.8 mm · Ø fuel hose connection: 5.2 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Camouflaged: No · Area of application: Tuning
CHF 59.90
Not in stock
Polini air filter | Piaggio Ciao, SI, Bravo, Boxer
Ø outside: 53 mm · Height: 94.7 mm · Manufacturer: Polini · Camouflaged: No · Material: Plastic · Area of application: Tuning · Filter type: Foam · Total length: 29 mm · Color: black · Ø Internal connection: 50.6 mm · Width: 98 mm · Mounting type: Plug connection clamped
CHF 14.90
Working late? Evening hours on Thursday until 20:00
